四川稻城竹鸡顶铜矿地质特征及成矿特点

竹鸡顶斑岩型铜矿位于西南三江成矿带内,热液蚀变以青磐岩化、泥化为特征。区内现已圈出1个矿带和2个矿化带,并有幅频激电异常、土壤铜异常与之套合。该区具有较好的找矿前景。     

云南东川因民铜矿金矿化特征及成因初探

因民铜矿发育两种金矿化类型:一是铜矿的伴生金;二是热液构造蚀变岩型。化探样品分析结果显示,金矿化主要赋存于金箔箐断层上、下盘的角砾状蚀变岩内,空间上受岩性和断裂构造的双重控制。邻区拖布卡金矿的成矿地质背景与本区相似,在成矿地质年代上作以类比推测,认为喜马拉雅期是主成矿期。另外通过对光片镜下和化探原生晕样聚类分析研究,发现构造蚀变岩型金矿化具明显的多期多阶段性及热液特征。     

Fluid–Sediment Interaction in a Marine Shallow-Water Hydrothermal System in the Wakamiko Submarine Crater, South Kyushu, Japan

The Wakamiko submarine crater is a small depression located in Kagoshima Bay, southwest Japan. Marine shallow‐water hydrothermal activity associated with fumarolic gas emissions at the crater sea floor (water depth 200 m) is considered to be related with magmatic activity of the Aira Caldera. During the NT05‐13 dive expedition conducted in August 2005 using remotely operated vehicle Hyper‐Dolphine (Japan Agency for Marine‐Earth Science and Technology), an active shimmering site was discovered (tentatively named the North site) at approximately 1 km from the previously known site (tentatively named the South site). Surface sediment (up to 30 cm) was cored from six localities including these active sites, and the alteration minerals and pore fluid chemistry were studied. The pore fluids of these sites showed a drastic change in chemical profile from that of seawater, even at 30 cm below the surface, which is attributed to mixing of the ascending hydrothermal component and seawater. The hydrothermal component of the North site is estimated to be derived from a hydrothermal aquifer at 230°C based on the hydrothermal end‐member composition. Occurrence of illite/smectite interstratified minerals in the North site sediment is attributed to in situ fluid–sediment interaction at a temperature around 150°C, which is in accordance with the pore fluid chemistry. In contrast, montmorillonite was identified as the dominant alteration mineral in the South site sediment. Together with the significant low potassium concentration of the hydrothermal end‐member, the abundant occurrence of low‐temperature alteration mineral suggests that the hydrothermal aquifer in the South site is not as high as 200°C. Moreover, the montmorillonite is likely to be unstable with the present pore fluid chemistry at the measured temperature (117°C). This disagreement implies unstable hydrothermal activity at the South site, in contrast to the equilibrium between the pore fluid and alteration minerals in the North site sediment. This difference may reflect the thermal and/or hydrological structure of the Wakamiko Crater hydrothermal system.     

Pelagic records from the Equatorial Ninetyeast Ridge and significant environmental events during the past 3.5 Ma

This paper presents pelagic records of planktic foraminifera, as well as data of stable isotope stratigraphy and carbonate stratigraphy since 3.5 Ma B.P. from site ODP758 in the Ninetyeast Ridge of the Indian Ocean. Based on these data, manifestations and related mechanisms of major tectonic and environmental events such as the rapid uplift of the Himalaya Mountains, “middle Pleistocene climatic transition” and “mid-Brunhes dissolution event” in the region are discussed. According to the analysis and comparison of various indices and changes in terms of foraminifera assemblage, paleotemperature, paleosalinity and themocline from site ODP758, the authors deduce that the paleoclimatic changes might correlate with the mid-Pleistocene transition at 1.4–1.7 Ma B.P. The changes of CaCO₃, mass accumulation rates (MAR) of CaCO₃ and non- CaCO₃ MAR indicate that the loaded terrigenous sediments increased at 1.7 Ma, which is in agreement with the uplift history of the Qinghai-Tibet plateau as shown by the available data. The last two changes coincide with the uplift of the Qinghai-Tibet plateau, hence they are called “Qinghai-Tibet movement” (1.7 Ma), and the “Kunlun-Yellow River movement” (1.2–0.6 Ma). The changes of the CaCO₃ content, coarse fraction (> 150 μm) content and planktonic foraminifera biostratigraphy show that strong dissolution of abyssal CaCO₃ occurred in the study region during 0.5–0.4 Ma. The event was consistent with the “mid-Brunhes dissolution event” in the sedimentary records of the Atlantic Ocean, Pacific Ocean, Indian Ocean and Nansha sea area of the South China Sea. __________ Translated from Geological Bulletin of China, 2007, 26(12): 1627–1632 [译自: 地质通报]     

Trace metals in suspended particulate matter and in sediment trap material from a permanently anoxic fjord — Framvaren, South Norway

Geochemical studies of the trace metal concentrations in suspended particulate matter (SPM) and sediment trap material from a permanently anoxic fjord, Framvaren, South Norway in 1989 and 1993 indicate that extremely high concentrations of zinc (max = 183920 mg/kg), copper (max = 4130 mg/kg), lead (max = 2752 mg/kg), and cadmium (max= 8.1 mg/kg) sometimes (1993) occur in the SPM collected in the anoxic water layer. The highest concentrations of Zn occur just below the redoxcline at 22 m water depth (in 1993), and copper, lead and cadmium have maximum concentrations between 30 and 80 m depth, where the amount of total SPM is at a minimum (about 0.3 mg/L). On a mass per volume (g/L) basis, the maximum concentrations of Cd, Cu and Fe occur at the interface (21m) and those of Zn occur just below the redoxcline (22 m depth). The SPM and sediment trap data suggest that the metals are precipitated as sulfide minerals in the anoxic water. The presence of particulate sulfides was confirmed by SEM studies that show the occurrence of discrete metal (Cu, Fe, Pb, and Zn) sulfide particles in size from 10–20 m as well as framboidal pyrites (1–5 m in size). Higher levels of metal sulfides at intermediate depths rather than in the deep water of Framvaren (> 100 m), may be due to input of trace metals by water exchange over the sill in the upper part of the water column. In the deep water, less metal sulfide precipitation takes place due to depletion of trace metals, and the dilution of particulate metal concentrations by organic matter and by the chemogenic formation of calcite.     

ELECTROCHEMICAL MEASUREMENT OF STEEL CORROSION IN SEABOTTOM SEDIMENT WITH “MD” METHOD

The tbough one year cormsion potential and polarisation resistanoc for 3 kinds of stals in seabottomedment of Liaodong Bay were measured with the “MD” method.The measurements wiIl have some thoretical and pndital talues. The thooretical valoc lies in thatthe reoorded changing process of the practital corrosion case can be basis for indoor discussion andeectrochemical on the corrosion practical value lies in that the obtained datu canbe basis for designing and controlling elatrochemical protation syttems. In fact, it is very difficult tomeasure in situ the cornosion parnders of steeIs in sea sediment.     

Seismic signals in geothermal areas of active volcanism: a case study from ‘La Fossa’, Vulcano (Italy)

Since the last eruption (1888–1890) volcanism at Vulcano, Aeolian Archipelago, southern Tyrrhenian Sea, has taken the form of persistent fumarolic activity. The gas-vapour phases of the geothermal systems are mainly discharged within two restricted areas about 1 km apart from each other, in the northern part of the island. These areas are La Fossa crater, and the beach fumaroles of the Baia di Levante. Fluids released at the two main fumarolic fields display quite different chemical and temperature characteristics, implying different origins. The local seismicity essentially takes the form of discrete shocks of shallow origin (depth1 km) at La Fossa, usually with energy < 10¹³ ergs. They are thought to be related to the uprise of pressurized hot gases and vapours discharged at the crater fumaroles. The present investigation points to the existence of two principal categories of seismic events (called M-shocks and N-shocks). These are short events (normally < 10 s). M-type shocks are thought to be due to resonance vibrations within the interior of the volcano, probably driven by the excitation of shock-waves within cavities deeply affected by deposition and alteration of self-sealant hydrothermal minerals. N-type events display features that resemble those of volcano-tectonic earthquakes, but have no recognizable S-phases. Here they are tentatively attributed to microfracturing of rocks which have been extensively hydrothermally altered. Results of the present study permit a preliminary conceptual model of the local shallow seismic processes in the framework of geochemical modelling of fumarolic activity and geological inferences from geothermal drilling.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

热液脉动与岩浆涌动控制机理浅论

热液脉动与岩浆涌动的控制机理,是基础地质理论所涉及的两个重要议题。本文首先对当今流行的构造控制机理提出了质疑,其后借助＂间歇喷泉＂原理和＂吹气球＂机制,分别对热浪的脉动和岩浆的涌动进行了必要的探讨。     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。