Paléoenvironnements et caractérisation des roches mères pétrolières des séries pré-salifères du bassin intérieur du Gabon

The Interior Basin of Gabon, created during the break-up between South America and Africa, displays thick Neoproterozoic to Aptian p.p. fluvio-lacustrine deposits overlain by Aptian to Albian marine facies. Rock–Eval analyses from outcrop and drillhole samples show high content in organic matter (up to 25%) related to types I and II. These intervals are encountered within Permian, Neocomian–Barremian as well as Aptian siliciclastic succession. They constitute fairly good to excellent potential petroleum source rocks, which are most probably at the origin of oil indices recognized both in drillholes and in surface.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

Magnetotelluric Investigation of the Hydrothermal System and Heat Source in the Muine-Toyoha Geothermal Area, Hokkaido, Japan

Abstract. Magnetotelluric (MT) surveys were carried out around the Muine volcano, Hokkaido, Japan, where it is expected that the heat and metal source forming the polymetallic Ag-Pb-Zn-Cu-In Toyoha deposit is present at depth. Measurements were performed at 20 sites, 18 of which were located along a WSW-ENE profile traversing the north ridge of Mt. Muine. A resistivity model obtained from 2D inversion of the MT data shows subsurface specific conductive and resistive features. Conductive layers are present at the surface of Mt. Muine. The low resistivity is probably due to the clay-rich rocks associated with the hydrothermal alteration. A high resistivity layer, which corresponds to the pre-Tertiary Usubetsu Formation, crops out east of Mt. Muine and dips westward. At the west foot of Mt. Muine, relatively high resistive layers are widely exposed. The resistivity increases with depth and exceeds 1000 ohm-m. This fact indicates that this region is not influenced by the recent hydrothermal activity. An extremely conductive zone about 3–6 km wide and 6–9 km thick exists at a depth of 2 km below Mt. Muine. This zone mostly corresponds to an elastic wave attenuation zone detected by a seismic survey. It is interpreted as a large hydrothermal reservoir or melted magma, which is a heat source of the hydrothermal system in this area.     

封丘县夏蝗发生与气候条件的关系

利用1980～200l午封丘县夏蝗发生资料和同期该地区气候资料，采用合成分析法，分析了气候条件对夏蝗发生的影响，并找出了一些预测夏蝗发生的定性预报因子。     

对波达波夫和Pride震电波方程组的对比分析

用Biot介质参数说明了波达波夫震电波方程组中弹性动力学 参数的含义，解释了第一类和第二类震电效应的意义，在忽略第一类震电效应条件下将该方 程组与Pride方程组进行比较，说明了二者在描述第二类震电效应方面的异同点. 同时指出 ：波达波夫方程组忽略了流体与固体的耦合质量；方程中的黏性耗散项丢掉了一个孔隙度因 子，依据该方程组计算出的弹性波和转换电场的幅度将偏大；边界条件之一存在错误，会影 响对波在界面上的反射透射规律的描述.     

ω循环型边界条件

通过利用预条件共轭梯度法对对称正定Toeplitz 矩阵系统进行分析，重点介绍了一种新的嵌入式预条件矩阵构造方法，证明了以前的预条件矩阵构造方法大都是这种方法的特例.提出了ω循环型边界条件，并将其与普通循环型及螺旋型边界条件作了分析、比较后得到了一种新的边界条件即混合型边界条件.     

1991年江淮暴雨时期的能量和水汽循环研究

通过对 1991年 5～ 7月江淮暴雨期全球范围的水汽输送和不同降水过程中江淮暴雨区及其临近区域的水汽收支和视热源和视水汽汇的计算分析得到了以下结论 :( 1)从水汽输送的机制来看 ,一方面 ,有大量的水汽以定常涡动的方式从孟加拉湾及南海输送到中国江淮地区 ;另一方面 ,江淮地区的瞬变涡动水汽向北输出 ,这可能与江淮地区频繁活动的α和β中尺度系统有关 ,它们将江淮地区汇集的充沛的水汽除了大部分以降水形式降下外 ,剩余部分继续向水汽较少的高纬地区输出 ,以维持全球水汽的平衡。( 2 )在降水过程中 ,局地蒸发项在水汽的供应中或再循环中十分重要 ,其数值一般为降水量的 13 ～ 12 ,这与1998年的降水情况相似。( 3 )在降水过程中 ,暴雨区的水汽主要是从南边界和西边界流入的 ,东边界和北边界则流出 ,并且水汽的流入、流出主要在中低层进行。 (a)在流入边界上 ,水汽通量的垂直分布存在差异 ,暴雨区西边界和南边界的水汽流入的垂直差异可能与其所在的地理位置有密切关系。 (b)对于暴雨区 ,不同强度的降水过程水汽的主要来源有所不同。( 4)在 5次降水过程中 ,视热源和视水汽汇的较大值对应降水的大值区 ,表明了水汽凝结加热对大气加热所起的主要作用。梅雨期降水 ,以对流性降水为主 ,对流活动随季节变化     

The numerical simulation of thesource development of the Tangshan earthquake

Ｔｈｅｎｕｍｅｒｉｃａｌｓｉｍｕｌａｔｉｏｎｏｆｔｈｅｓｏｕｒｃｅｄｅｖｅｌ┐ｏｐｍｅｎｔｏｆｔｈｅＴａｎｇｓｈａｎｅａｒｔｈｑｕａｋｅＺＨＩ－ＲＥＮＮＩＵ（牛志仁）ＤＡＮＧ－ＭＩＮＣＨＥＮ（陈党民）ＢＩＮＧ－ＱＩＡＮＬＩ（李炳乾）Ｓｅｉｓｍｏｌｏ...     

威特DI2002测距仪实测精度分析

通过对威特ＤＩ２００２测距仪的实测资料的分析，认为（１）ＤＩ２００２测距仪实测精度较高，与ＭＥ－３０００测距仪具有同等的实测精度，（２）ＤＩ２００２仪器性能稳定，加、乘常数变化幅度小，频率变化也很小，其频率的稳定性远比ＭＥ－３０００测距仪匹配的测频仪高。（３）ＤＩ２００２与ＭＥ－３０００测距成果有很好的一致性。在ＭＥ－３０００测距仪老化的情况下，可以用ＤＩ２００２替代ＭＥ－３０００用于跨断层水平形     

Seismic moment tensor representations and radiation patterns in unbounded media with elipsoidal cavities driven by low frequency pressure

ＳｅｉｓｍｉｃｍｏｍｅｎｔｔｅｎｓｏｒｒｅｐｒｅｓｅｎｔａｔｉｏｎｓａｎｄｒａｄｉａｔｉｏｎｐａｔｅｒｎｓｉｎｕｎｂｏｕｎｄｅｄｍｅｄｉａｗｉｔｈｅｌｉｐｓｏｉｄａｌｃａｖｉｔｉｅｓｄｒｉｖｅｎｂｙｌｏｗｆｒｅｑｕｅｎｃｙｐｒｅｓｓｕｒｅＰＩ...