岩石锚杆基础抗拔承载力计算方法探究

岩石锚杆基础作为架空输电线路塔基中的一种特殊基础型式,可以充分发挥原状岩体的力学性能,具有良好的抗拔性能。根据目前岩石锚杆基础原型试验的结果,《架空送电线路基础设计技术规定》中所推荐的单锚基础抗拔承载力计算模型中,理想45?破坏模式与实际不符,按其设计计算值偏差较大,可能导致设计成果不安全。为此,依据极限平衡原理基于围岩强度建立了较为合理的抗拔承载力计算模型,力学推导得出了相关公式,并进行了简化。通过推导公式计算值与实测值、设计值对比验证可知,抗拔承载力极限值位于 ～ 区间内,与推荐公式 的计算值一致性较好,能满足工程应用精度,具有可行性。     

搅拌桩复合地基平面模拟的简化方法探讨

水泥土搅拌桩(DMM)在高速公路工程中得到广泛应用,人们也希望能对该复合地基在路堤荷载下的地基的变形深入了解,其数值分析是一种重要的方法。但是,采用三维有限元进行数值模拟在高速公路工程中容易造成数组过大,计算时间并且收敛性比较差,因此把三维问题简化为二维问题是众望所归。在把三维问题简化二维平面问题简化计算时,最重要的是参数的折减。基于水泥土搅拌桩复合地基的特性,结合理论分析提出了一种参数折减的方法。并依据连盐高速公路实测的数据验证了该参数简化方法的可行性。     

苏浙皖边界地区苏皖运动的有关问题

苏皖运动的存在于否,对研究苏浙皖边界地区的地质发展史和正确认识长兴阶地层有重要意义。笔者论证了长兴组的厚度变化、界线粘土层的性质与成因、底砾岩的确认和地层接触关系、古生物群的突变等问题,认为:1)区内苏皖运动是存在的;2)砺山-江阴海堤不可否定;将安徽广德牛头山经江苏宜兴至江阴条带内的龙潭组上部地层作为长兴组的相变产物是不妥的。     

松潘地区岩金统计成矿予测中泛克立格法的应用

川西北地区是国内重要的岩金普查靶区。本文对松潘地区的地质特征,泛克立格法原理,及在本区的应用情况作了介绍,对主要计算步骤,给出基本结果,对计算获得的有意义异常区,进行地质解释,并将此方法与趋势面分析进行对比。     

柴达木盆地东部地区石炭系泥页岩生烃条件及选区

柴达木盆地石炭系露头、钻井资料均揭示,其为海相沉积烃源岩,且石炭系泥页岩气展现出良好的勘探前景。对柴达木盆地东部石炭系泥页岩沉积环境、有机质丰度、类型和演化程度进行综合评价,利用野外露头、探井、地震、非震等资料证实了石炭系的残留及分布。研究认为,柴东地区石炭系泥页岩主要集中在上石炭统滨岸潮坪沉积的克鲁克组,发育炭质泥页岩、暗色泥岩2种烃源岩,有机碳均值为3.08%,有机质类型为Ⅱ-Ⅲ型,处于成熟-高成熟演化阶段,73%的样品达到中等-好烃源岩。平面上主要分布于尕丘、欧南、霍布逊和德令哈凹陷,分隔性较强,具有多个厚度中心,其中以欧南凹陷石灰沟地区和霍布逊凹陷落实程度高、资源潜力大,是泥页岩气最有利的发育区。     

Fermat猜想的两个等价命题

对每个奇素数p,我们提出了关于p的两个命题:(I)不存在正整数m和n,使代数曲线f(y)=y~3-(2m+1)y-2n的三个零点同时为p方有理整数;(I)不存在正整数m,使不定方程x~2+3y~2=4(2m+1)具有三组正整数解x_i,y_i(i=1,2,3),满足x_1=x_2+x_3,x_1~2+x_2~2+x_3~2=6(2m+1)。本文旨在证明(I)及(I)都与关于素数p的Fermat猜想等价。     

Fault structures and their geoelectric parameters in the epicentral zone of the 27 September 2003 Chuya earthquake (Gorny Altai) from resistivity data

This paper presents an integrated measurement technique based on DC methods (vertical electrical sounding, electrical resistivity tomography) which was used to identify faults and determine their geoelectric parameters in the western part of the Chuya basin. New information on the structure of the Chagan River valley located in the zone of the disastrous 27 September 2003 Chuya earthquake has been obtained from the results of these methods. Geoelectric cross-sections of the sedimentary sequence and the upper part of the basement were obtained from VES data, showing the block structure of the study area. Electrical resistivity tomography sections confirm the presence of a major fault between basement blocks of different heights and indicate the presence of faults bounding the valley on its right side and in the southwestern part.     

Engaging Diasporas for Development: a case study of Pitcairn Island

Diaspora engagement is a growing trend and many governments, international organisations and policy makers are increasingly focusing on the role of diaspora in development strategies for the homelands. Such policies are predominantly critical to island-dense regions such as the Caribbean and Pacific that have suffered high rates of outmigration during the postcolonial period. One such Pacific island is Pitcairn, a British Overseas Territory, and is the focus of this article. But while most of the literature focuses on the positive benefits of diaspora engagement, this paper examines the dynamics of diaspora (dis)engagement and (dis)affection. Each diaspora has a unique set of needs and capabilities based on its historical experience and the present realities of its countries of origin and destination. While much has been written celebrating the role of diasporas in development, diaspora have also shown themselves to have dual natures, with sometimes conflicting identities and allegiances. Based on analysis of a recent Pitcairn Diaspora Survey and ethnographic data, discussion in this paper reveals that the best intentions of engaging diaspora for development can be impeded by several factors including: (1) the complex nature of identity, place and politics; (2) difficult negotiations between past, present and future intentions of movers; and (3) shifting ‘roots/routes’ and boundaries of identification. Consequently, the paper aims to highlight the realities of settlement and relationships of diaspora space and subjectivity with the homeland.     

Word2003文档中插入AutoCAD2004图形的三种方法

对于测绘技术人员来说,需要编写设计书、技术总结、监测方案等测绘类文档。利用Word2003自带的绘图工具,远远不能满足要求。介绍了“利用复制＋粘贴工具”、“转换图像格式”、“使用插入对象”三种方式在Word2003文档中插入AutoCAD2004图形的三种方法,     

基于准三维有限元方法建立的地震活动模型

基于有限元方法,参照细胞自动机模型,建立了一个地震活动演化的动力学模型.在这个模型中,根据边界条件和单元介质参数的分布,利用有限元方法确定各单元的应力增长速率.每个单元设定初始应力和摩擦因数,利用破裂准则可得到单元破裂所需时间.当单元破裂后,将破裂单元作为内部边界,利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整.根据上述规则,建立一个由30×40个节点组成,在定常位移速率边界条件作用下的地震活动模型,探讨了区域应力场的动态演化、地震活动图像和各种参数变化对地震活动的影响.结果表明该模型在研究地震活动方面有一定优势并具有实用价值.