KK型管节点应力集中系数几何敏感性分析

KK型管节点是自升式平台桁架式桩腿中的一种管节点,其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关,为分析KK型管节点应力集中系数对几何参数的敏感性,利用ANSYS软件对某KK型管节点进行几何参数化建模,利用有限元数值模拟方法对各工况下的热点应力进行分析,并分别计算各相应工况下的名义应力,然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析,得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明,应力集中系数与撑杆受力状态、管节点结构形式有关,在满足结构布置、建造工艺和其他安全性指标的前提下,分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。     

风沙流中跃移沙粒冲击速度和角度联合概率分布风洞实验

近地表跃移沙粒速度和角度概率分布是连接风沙运动宏观研究和微观研究的桥梁,对沙粒跃移轨迹和输沙率分布有很大影响。但是,目前跃移沙粒冲击速度概率分布和角度概率分布之间的关系还不明确。使用相位多普勒粒子分析仪（PDPA）测量了风洞沙床面1 mm高度处的跃移沙粒速度,通过分析各冲击速度对应的冲击角度的概率分布研究了沙粒冲击速度和角度的联合概率分布。结果表明：沙粒冲击速度概率分布可用对数正态函数描述,冲击角度概率分布可用指数函数描述;各冲击速度对应的冲击角度都符合指数函数分布,且其衰减速度随冲击速度增加而加快。这表明,冲击速度概率分布和冲击角度概率分布之间具有很强的相关性。最后分别给出了沙粒冲击速度和角度的独立假设概率分布和条件联合概率分布。     

琼州海峡海口站近岸风暴增水概率风险分析

基于海口站1976~1997年逐时潮位和逐日最大风速资料,利用阿基米德Copula函数构建海口年最大增水与相应日期最大风速的联合概率分布模型。结果表明:1)广义极值分布可作为海口站年最大增水和相应日期最大风速的边缘分布。两个序列之间存在强正相关关系,G-H Copula函数更适用于作为海口站年最大增水和相应日期的最大风速联合概率分布的连接函数。2)两变量联合作用的同频率增水高度设计值与增水的单变量边缘分布设计值之间的相对差值约为7.5%。3)条件概率1(P(Y≥y|X≥x))中同频率的年最大增水和相应风速的遭遇概率介于78.2%~80.9%,条件概率2(P(Y≥y|X≤x))中同频率的年最大增水和相应风速两者的遭遇概率小于4.8%。     

多维联合概率理论对三峡工程设计洪水的计算

首次将多维联合概率理论应用到三峡大坝设计洪水的风险分析,并用随机模拟方法(ISPUD)对四维联合概率分布进行了求解,得出在长江上游干流及主要支流来水量出现的不同组合和最不利组合情况下,相应三峡大坝不同联合重现期的设计洪水。可用于三峡工程的风险分析及防洪调度。     

重力数据约束的二维地震层析成像在台湾海峡南部的应用

地震-重力联合反演可以降低多解性,针对大勘探范围内岩石波速-密度关系存在较大散布的问题,引入交叉梯度结构约束构建统一的目标函数是一种有效的解决方案。利用台湾海峡南部HX-13测线进行验证:由于火成岩侵入体的存在,部分区域难以拾取可靠的地震初至,常规的走时反演无法准确恢复基底面的形态。搜集研究区的船测重力资料,根据地震地质条件和数据特点设置合适的反演参数,实现基于物性和结构双重约束的重力-地震联合反演。由对反演结果的分析和解释可以看出,该方法可在很大程度上弥补地震数据不完备的缺陷,使反演过程稳定,并提高模型的可靠性。     

基于循环孔洞扩张模型的X型圆管节点超低周疲劳寿命预测

海洋工程钢结构在服役过程中,受风、浪、流或地震等极端循环载荷的影响,易发生超低周疲劳断裂破坏,造成人员伤亡及财产损失,因此超低周疲劳断裂分析及寿命预测对于海工结构安全性评估至关重要。然而,现阶段基于累积损伤理论提出的多种超低周疲劳寿命预测模型无法对多尺度节点实现统一预测,造成了实际工程应用的不便。因此文中基于循环孔洞扩张模型开展X型圆管节点超低周疲劳寿命预测。首先,开发了基于循环孔洞扩张模型的VUSDFLD程序,实现ABAQUS与FORTRAN子程序联合应用,利用有限元分析验证循环孔洞扩张模型在X型圆管节点超低周疲劳断裂分析中的有效性;其次,根据多组X型圆管节点超低周疲劳断裂有限元分析结果,在宏观层面提出了一种基于Manson-Coffin公式的超低周疲劳寿命预测公式;最后,依据Miner理论,将适用于等幅加载的超低周疲劳寿命公式扩展至变幅加载情况,验证了多种节点尺寸下超低周疲劳公式的适用性,为工程应用提供了理论依据。     

机械光栅式测缝计应用于无砟轨道板上拱监测的可行性分析

高速铁路轨道的稳定性和平顺性是高速铁路正常运营的关键,因此对运营期高速铁路的轨下结构持续地开展变形监测是十分必要的。当前我国对轨道板变形的检测主要是依靠人工肉眼观察式的现场检查和常规水准测量方式进行监测,效率低下,难以在有限的天窗时间内完成辖区内轨道结构的全覆盖检测。基于此,从理论分析和实验测试两方面探讨机械光栅式测缝计应用于无砟轨道板上拱自动化监测的可行性,结果表明机械光栅式测缝计能够抵抗高温、淋水和振动等不良条件的影响,满足轨道板上拱监测的精度要求。     

Fractographic determination of joint length distribution in chalk

Summary Measurements of fracture joint distribution combined with determinations of plume length and orientation on a vertical section of a single chalk layer near Beer Sheva, Israel, reveal that joints marked by unilateral and circular plumes are skewed towards the shorter sizes while joints decorated by bilateral plumes are skewed towards the longer sizes. The mean lengths of the unilateral and bilateral joints are 66.5 cm and 155.6 cm, with standard deviations of 30 cm and 60.6 cm, respectively. These results as well as joint length observations from other areas seem to suggest a bimodal length distribution. However, since the minor maximum is generally very weak, and due to some additional uncertainties, further confirmation of the present observations is needed.     

Shear resistance of jointed rock masses and stability calculation of rock slopes

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.     

Tomographic determination of 3-D crustal structure — Joint inversion of explosion and earthquake data

In this paper, the theory and method, obtaining the tomographic determination of three-dimensional velocity structure of the crust by use of the joint inversion of explosion and earthquake data, are given. The velocity distribution of the crust is regarded as a continuous function of the spatial coordinates without parametrization of the velocity model ahead, so that the inversion solution would not be influenced by different parametrization procedures. The expressions of integration kernels, which relates the two kinds of data sets, are also given. The authors have processed the observed data in Tangshan earthquake region by the method proposed in this paper, and obtained the tomographic results of the middle and upper crust structures in this region. The comparison of these results with the result obtained only by the explosion data, has also been made.