High-resolution sediment echosounding off Peru: Late Quaternary depositional sequences and sedimentary structures of a current-dominated shelf

About 6000 km of both bathymetric and high-resolution acoustic profiles were acquired on the shelf and upper slope offshore Peru between 9° S and 14° S. Two new sediment echosounder systems – SEL-96 and SES-2000DS – provided details of the sedimentary structures of the Quaternary sequences within the Sechura-Salaverry, Huacho and Pisco Basins. To a great extent, the poleward undercurrent determines the distribution of sediments. The undercurrent has generated numerous erosional unconformities, it has winnowed hardgrounds and has created mudwaves common between 250 m and 400 m water depth. Distinct subbottom reflectors within sedimentary units represent hiatuses due to periods of intensified winnowing or non-deposition. Erosional unconformities usually marked by pronounced reflectors suggest shifts of the undercurrent system related to climatic changes and eustatic variations of sea level. On a larger scale, the stacked prograding depositional sequences reflect the sea-level cycles of the Middle Pleistocene to the Holocene. Based on the stratigraphy of our piston cores and that of Ocean Drilling Program (ODP) Site 680, the depositional sequences limited by extended unconformities were assigned to oxygen isotope stages 1 to 7. Other sedimentary structures are small straight channels that were conduits for downslope sediment transport. Deformed sediments associated with synsedimentary normal faults result from creep movements indicating beginning slope failure.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Simulation of Formation and Spreading of Salinity Minimum Associated with NPIW Using a High-Resolution Model

A series of numerical experiments were conducted with a high-resolution (eddy-permitting) North Pacific model to simulate the formation and spreading of the salinity minimum associated with the North Pacific Intermediate Water (NPIW). It was found that two factors are required to simulate a realistic configuration of the salinity minimum: a realistic wind stress field and small-scale disturbances. The NCEP reanalyzed wind stress data lead to better results than the Hellerman and Rosenstein wind stress data, due to the closer location of the simulated Oyashio and Kuroshio at the western boundary. Small-scale disturbances formed by relaxing computational diffusivity included in the advection scheme promote the large-scale isopycnal mixing between the Oyashio and Kuroshio waters, simulating a realistic configuration of the salinity minimum. A detailed analysis of the Oyashio water transport was carried out on the final three-year data of the experiment with reduced computational diffusivity. Simulated transport of the Kuroshio Extension in the intermediate layer is generally smaller than the observed value, while those of the Oyashio and the flow at the subarctic front are comparable to the observed levels. In the Oyashio-Kuroshio interfrontal zone the zonally integrated southward transport of the Oyashio water (140–155°E) is borne by the eddy activity, though the time-mean flow reveals the existence of a coastal Oyashio intrusion. In the eastern part (155°E–180°) the zonally integrated transport of the Oyashio water indicates a southward peak at the southern edge of the Kuroshio Extension, which corresponds to the branching of the recirculating flow from the Kuroshio Extension. This revised version was published online in July 2006 with corrections to the Cover Date.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

城市框架数据的更新模式及应用研究

分析了利用竣工测量数据、VRS技术及高分辨率影像更新城市框架数据三种模式的可行性,给出了适合青岛地区框架数据的更新方案.     

High-resolution sequence stratigraphy of the Lower Triassic ‘Buntsandstein’ in the Netherlands and northwestern Germany

Detailed log correlations of the largely fluvio-lacustrine Lower Triassic Buntsandstein (Late Permian-Early Anisian), carried out on 80 wells in the Dutch onshore and offshore areas, can be linked to northwest-German high-resolution sequence stratigraphy. The correlations show that cyclic sedimentation occurred in large parts of the basin. Seven 1st-order sequences are recognised, namely the Main Claystone, Rogenstein, Volpriehausen, Detfurth, Hardegsen, Solling and Lower Röt Sequences. They are overlain by the lower part of the Upper Röt–Lower Muschelkalk Sequence. Distinct sequence boundaries have been identified at the bases of four sequences: Volpriehausen, Detfurth, Solling and Upper Röt. The higher-order sequences consist of fining-upwards cycles with a thickness of up to tens of metres. The sequences are laterally persistent and have a characteristic expression on gamma-ray and sonic logs. In the Lower Buntsandstein, they display a uniform character throughout most of the area, with only minor differences in thickness or lithology. NNE-oriented lows and swells were formed during deposition of the Volpriehausen, Detfurth and Hardegsen Sequences. Uplift prior to the deposition of the Solling Sequence caused deep erosion on the swells in the basin and minor erosion in the lows. The high-resolution sequences probably represent alternating, relatively wet and dry climatic periods, with a periodicity of about 100 000 years. An analysis of the sequences suggests that their reduced thickness on the swells is mainly the effect of erosion. This is supported by analyses of the accumulation patterns and rates.     

High-resolution sedimentary record of lead in the coastal mud of the East China Sea in the past one hundred and fifty years

In the East China Sea （ECS）, there are some mud areas, including the south coastal mud area, the north coastal mud area, and the mud area to the southwest of Cheju Island. X-ray fluorescence （XRF） techniques and Thermal Ionization Mass Spectrometry （TIMS） were used to study the high-resolution sedimentary record of Pb concentrations and Pb stable isotopic compositions in the past one hundred and fifty years in the coastal mud of the ECS. Pb concentrations of a ^210Pb dating S5 core in the study area have increased rapidly since 1980, and reached the maximal value with 65.08 μg/g in 2000, corresponding to the fast economic development of China since the implementation of the ＂Reform and Open Policy＂ in 1978; ^206Pb/^207Pb ratios generally had stabilized at 1.195 from 1860 to 1966, and decreased gradually from 1966 to 2000, indicating that the anthropogenic source Pb contribution to the ECS has increased gradually since 1966, especially since 1980. Pb concentrations decreased distinctly from 2000 to 2003 and ^206Pb/^207Pb ratios increased from 2001 to 2003, corresponding closely to the ban of lead gasoline from 2000 in China. From 1950 to 2003, there occurred four distinct decrease events of ^206Pb/^207Pb, possibly responding to the Changjiang River （Yangtze River） catastrophic floods in 1998, 1991, 1981 and 1954; from 1860 to 1966, there were two decrease periods of ^206Pb/^207Pb, which may respond to the catastrophic floods of Changjiang River in 1931 and 1935, and 1870. As a result of the erosion and drowning by the catastrophic floods, the anthropogenic lead accumulated in soil and water environments over a long period of time was brought into the Changjiang River, then part of them was finally transported into the ECS, which leads to changes in Pb stable isotopic composition.     

Combined Digital Photogrammetry and Time-of-Flight Laser Scanning for Monitoring Cliff Evolution

Although cliffs form approximately 75% of the world's coastline, the understanding of the processes through which they evolve remains limited because of a lack of quantitative data on the morphological changes they undergo. In this paper the combination of terrestrial time-of-flight laser scanning with high-resolution digital photogrammetry is examined to generate high-quality data-sets pertaining to the geomorphic processes governing cliff development. The study was undertaken on a section of hard rock cliffs in North Yorkshire, UK, which has been monitored over a 12-month period. High-density, laser-scanned point clouds have been used to produce an accurate representation of these complex surfaces, free from the optical variations that degrade photographic data. These data-sets have been combined with high-resolution photographic monitoring, resampled with the fixed accuracies of the terrestrial laser survey, to generate a new approach to recording the volumetric changes in complex coastal cliffs. This has led to significant improvements in the understanding of the activity patterns of coastal cliffs.     

从洛杉矶地区地震实验计划说起

简要介绍了美国洛杉矶地震实验计划(LARSE)的研究目的、科学思路以及一些重要的研究成果。受LARSE计划实践的启发，文章对我国即将开展的城市活断层探测研究思路提出了几点科学认识：①进行深浅活动构造相结合的探测，建立直到震源深度的活动断裂立体图像；②实施折射／反射相结合的综合性探测，发展高分辨折射技术，弥补数百米-数千米深度范围成像的不足；③重要的活动断层常常具有一定的规模，在空间上构成复杂的构造格局，因此，活断层探测不能局限在城市，而应在一定的空间范围中进行。     

Circulation characteristics of a monsoon depression during BOBMEX-99 using high-resolution analysis

The skill and efficiency of a numerical model mostly varies with the quality of initial values, accuracy on parameterization of physical processes and horizontal and vertical resolution of the model. Commonly used low-resolution reanalyses are hardly able to capture the prominent features associated with organized convective processes in a monsoon depression. The objective is to prepare improved high-resolution analysis by the use of MM5 modelling system developed by the Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR). It requires the objective comparison of high and low-resolution analysis datasets in assessing the specific convective features of a monsoon depression. For this purpose, reanalysis datasets of NCAR/NCEP (National Center for Atmospheric Research/National Centers for Environmental Prediction) at a horizontal resolution of 2.5‡ (latitude/longitude) have been used as first guess in the objective analysis scheme. The additional asynoptic datasets obtained during BOBMEX-99 are utilized within the assimilation process. Cloud Motion Wind (CMW) data of METEOSAT satellite and SSM/I surface wind data are included for the improvement of derived analysis. The multiquadric (MQD) interpolation technique is selected and applied for meteorological objective analysis at a horizontal resolution of 30 km. After a successful inclusion of additional data, the resulting reanalysis is able to produce the structure of convective organization as well as prominent synoptic features associated with monsoon depression. Comparison and error verifications have been done with the help of available upper-air station data. The objective verification reveals the efficiency of the analysis scheme.