上海城市天际线与高层建筑发展之关系分析

以上海市2000年中心城区航空影像为基础,基于GIS技术分析城市高层建筑与天际线的分布特点及其影响机制。认为城市天际线与高层建筑相互制约,高层建筑的发展与布局必须考虑城市天际线的特色。     

中南半岛对流对南海夏季风建立过程的影响

利用RegCM2模式进行数值试验,得到中南半岛对流对北半球副高带断裂、进而对孟加拉湾对流建立具有重要影响,而孟加拉湾对流建立后激发的Rossby波列又是南海夏季风建立的主要因子之一.进一步分析中南半岛对流、副高带断裂及南海夏季风建立的年际变化,得到中南半岛对流的强弱(活跃的早晚)与副高带在孟加拉湾北部断裂及南海夏季风爆发的早晚有密切关系.它们还与海温异常及纬圈环流的变化相联系:当赤道中东太平洋海温偏暖(冷)时,Walker环流偏弱(强),中南半岛对流偏弱(强),副高带断裂偏晚(早),南海夏季风建立偏迟(早).     

2003年淮河流域致洪暴雨过程的环流背景及其前兆信号

分析研究了2003年夏季淮河流域致洪暴雨过程的时空分布特征及其前期和同期欧亚地区环流背景的逐日变化特征,重点分析了致洪暴雨过程发生前后乌山地区阻塞高压强度指数(UBHII)逐日变化特征及其对淮河流域致洪暴雨过程的影响．结果表明：2003年淮河流域持续性强暴雨过程均发生在鸟山阻塞高压强高峰后的减弱期,即在淮河流域发生持续性强暴雨过程之前乌山阻塞高压就发生了突变;同时发现西太平洋副热带高压加强并登陆后的,其北界的位置变化对淮河流域致洪暴雨过程的发生和持续也有十分重要的作用．因此,乌拉尔山阻塞高压异常加强后的突然减弱和西太平洋副热带高压的加强并西进登陆,是淮河流域地区发生持续性暴雨过程的两个重要前兆．     

高压喷射注浆技术在白龟山水库顺河坝防渗墙围井试验中的应用

本次围井高喷试验,选用三重管摆喷法处理方案,施工采用两序施工方法.砼墙体连续均匀,孔与孔之间连接较好,其防渗、强度、厚度均能满足设计要求.     

Oligocene–Miocene thrusting in central Aegean: insights from the Cycladic island of Amorgos

In the central Aegean, the Cycladic island of Amorgos consists of two high‐pressure (HP) units, the marble‐rich Amorgos unit, which is correlated to the Mesozoic ‘cover’ sequence of the Menderes Massif, and the Cycladic Blueschist unit. New structural data show that the deformation history of the Amorgos HP‐rocks was principally governed by early Oligocene (or late Eocene)–early Miocene ductile to brittle thrusting (D₁–D₃) followed by middle–late Miocene oblique contractional movements (D₄–D₅). The D₁ phase caused syn‐blueschist‐facies ductile thrusting of the Cycladic Blueschist unit over the Amorgos unit, with ambiguous kinematics. Progressive deformation under continuous NW–SE compression produced a sequence of imbricate NW‐directed thrusts (D_2/3) characterized by a stratification of fault‐related rocks, with mylonitic zones (D₂) giving way downwards to cataclastic zones (D₃). Ductile D₂ thrusting synchronous to greenschist‐facies retrogression, was accompanied by mega‐sheath folding during constrictional and general shear deformation. Brittle D₃ thrusting was associated with NW‐verging F₃ folds trending at a high‐angle to the transport direction. Orthogonal contraction gave way to transpression during which the compression orientation changed from NW–SE (D₄) to NE–SW (D₅). Back‐arc related NW–SE pure extension (D₆) seems to have been established in post‐late Miocene times and related high‐angle normal faulting affected HP‐rocks only after they had already reached the uppermost crustal levels. Oligocene–early Miocene deformation history is interpreted to indicate syn‐compressional exhumation of HP‐rocks possibly in an extrusion wedge. In this case, Amorgos HP‐rocks should have occupied the base of the extrusion wedge. Copyright © 2011 John Wiley & Sons, Ltd.     

Genetic type,distribution patterns and controlling factors of beach and bars in the second member of the Shahejie formation in the Dawangbei Sag,Bohai Bay,China

As an important reservoir type in the Bohai Bay Basin, China, lacustrine beach and bar sands which refer to the shallow water complex deposited mainly by nearshore, delta‐rim and buried hill‐related beaches as well as longshore bars were developed in a particular stage in the evolution of those faulted Cenozoic continental depressions. In the Chezhen Depression, for example, the Second Member of the Oligocene Shehejie Formation (abbr. as Es2 hereafter) formed during the rifting‐to‐thermal subsidence transitional stage. Although well developed in Es2, beach and bar sands are difficult to recognize owing to their relative thinness. The paper summarizes sedimentary characteristics of lacustrine beach and bar sands on cores and logs. Low‐angle cross‐stratification, swash stratification, as well as occasional small‐scale hummocky cross‐stratification resulted from storms can be observed in beach and bar sands. The paper distinguishes bars and beaches from each other in Es2 mainly based on the grain‐size, bed thickness, facies succession and log responses. In order to predict the distribution of beach and bars, a chrono‐stratigraphic correlation framework of Es2 in the study strata is established using a high‐resolution sequence stratigraphic approach. Es2 strata are sub‐divided into six medium‐scale cycles and the mapping of the high‐frequency cycles allows the geographic and stratigraphic distribution of both beach and bar sands to be predicted. The study shows that beach and bars are better developed in times of base‐level fall than in base‐level rise. Factors such as lake‐level fluctuation, sediment supply, palaeogeomorphology and palaeowind direction have exerted control on the formation and distribution of beach and bar sands. Finally, the genetic pattern of beach and bar sands in the Es2 unit has been constructed, which provides a foundation for the prediction of beach and bars reservoir in continental basins in general. Copyright © 2011 John Wiley & Sons, Ltd.     

The state‐of‐the‐art in marine navigation

Tide gauges distributed all over the world provide valuable information for monitoring mean sea level changes. The statistical models used in estimating sea level change from the tide gauge data assume implicitly that the random model components are stationary in variance. We show that for a large number of global tide gauge data this is not the case for the seasonal part using a variate-differencing algorithm. This finding is important for assessing the reliability of the present estimates of mean sea level changes because nonstationarity of the data may have marked impact on the sea level rate estimates, especially, for the data from short records.     

Improving the Coastal Mean Dynamic Topography by Geodetic Combination of Tide Gauge and Satellite Altimetry

Abstract

The ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography.     

Positioning requirements for the tsunami warning system

Abstract

Canada has increased the number of tsunami warning stations on the Pacific Coast from two to three. The last gauge was installed at the north end of Vancouver Island, thereby filling a large gap previously existing and providing full coverage along the coast. The record of gauges at two of the three locations is accessible either by telephone or by means of meteor burst communication, alleviating the difficulties experienced during the tsunami threat of May 6, 1986, when telephone communications were disrupted by heavy use. The gauge at Langara Island will be relocated in a more accessible and also a more tsunami‐responsive location at Rennell Sound in the Queen Charlotte Islands. All tsunami gauges also serve as tide gauges, recording the water level every 15 min. In the event of a tsunami, the recording interval can be altered to every 60 s. Suggestions have been made that Canada attempt deep‐sea recording of tsunamis off its Pacific Coast. Although this would be of great scientific value, no such program is contemplated at this time.     

改性黏土对褐潮生物种Aureococcus anophagefferens的去除研究

褐潮是一种由微微型藻引发的藻华,已连续4年在渤海海域暴发,给当地带来巨大的经济损失。目前,在褐潮尚不能有效预防、预控情况下,如何控制和减少其对生态环境和沿海经济带来的危害,成为一个急需解决的问题。利用改性黏土消除藻华是一种快速有效、并得以多次现场成功应用的方法。考察比较了多种不同产地、不同类型的黏土及其改性后对褐潮生物种Aureococcus anophagef ferens(抑食金球藻)的去除效果,选取5种典型的黏土作为主要的实验材料,开展了不同条件下黏土及其改性后对A. anophagef ferens去除效率的影响研究。实验发现,因A. anophagef ferens个体微小、藻华时密度大,相同用量的黏土或改性黏土对其去除效率低于常见的硅藻、甲藻生物;不同类型黏土对其去除效率有影响,高岭土的去除效率高于蒙脱土;而黏土改性后对A. anophagef ferens的去除效率提高3倍以上。在此基础上,还考察分析了黏土粒径、分散介质等因素对A. anophagef ferens去除效率的影响,为进一步研发安全、高效的褐潮应急消除材料做了有益探索。