利用相关逼近法建立定位与姿态数据的同步模型

根据海道测量精密测量的需求,对姿态与定位数据融合的同步方法进行了研究。通过GPS大地高数据和升沉数据,建立了一种基于相关逼近原理的定位与姿态数据同步模型。该模型能够确定定位与姿态数据的相对延时,实现两类数据在同一时间基准下的同步。实例计算表明,定位与姿态数据的相对延迟时间已成为两类数据融合应用中必须考虑的因素。由同步模型解算后,GPS大地高数据与总升沉数据体现了更好的一致性,由此也验证了模型的有效性。     

利用TOPEX卫星高度计资料分析台湾岛周边海域巨浪和大风特征

卫星高度计实现了对全球性或区域性的海洋参量的实时监测,TOPEX卫星高度计提供了迄今为止时间序列最长、数据质量最高的全球海面风速和有效波高的同步观测资料。利用TOPEX卫星高度计资料,分析了有效波高4m以上的巨浪在台湾岛周边海域的时空分布特征,结果表明台湾岛周边海域巨浪的分布具有明显的季节特征。每年平均有效波高最大值大多数出现在夏季,春季是1a中有效波高最小的季节,而秋季和冬季是巨浪出现频率最高的季节。波高大于6m的巨浪大都出现在台湾岛东部及东北部海域,在南部海域出现较少。     

A traversing system to measure bottom boundary layer hydraulic properties

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.     

Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

Characteristics of developing waves as a function of atmospheric conditions,water properties,fetch and duration

For any specific wind speed, waves grow in period, height and length as a function of the wind duration and fetch until maximum values are reached, at which point the waves are considered to be fully developed. Although equations and nomograms exist to predict the parameters of developing waves for shorter fetch or duration conditions at different wind speeds, these either do not incorporate important variables such as the air and water temperature, or do not consider the combined effect of fetch and duration. Here, the wind conditions required for a fully developed sea are calculated from maximum wave heights as determined from the wind speed, together with a published growth law based on the friction velocity. This allows the parameters of developing waves to be estimated for any combination of wind velocity, fetch and duration, while also taking account of atmospheric conditions and water properties.     

����ԳƷ��ڵ��㶨λ�е�Ӧ��

???GPSα????λ????????????????????μ?????????????λ??????????????ù????????????????????????????????棨???棩?????????????????????????????????α?????????????????????α???????????????????????λ??????????·??????????????????λ???????????????????????????????ν????????????????????????Ч????????λ?????????????????     

������ģ��EGM2008��EGM96���й������ıȽ�������

?????й?854??GPS/?????????EGM2008??EGM96?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????289??GPS/??????н????????????????????????????????????????????????EGM2008???EGM96???????á?     

GPS高程拟合方法精度分析

近年来人们往往利用GPS数据来确定大地高,但大地高不同于正常高,为此,利用多项式拟合与地球重力场模型相结合的数学方法,使GPS所测大地高通过这些数学模型直接转换为具有厘米精度的正常高,将该方法得到的正常高与单独利用多项式拟合和地球重力场模型得到的结果进行了比较,其差值的标准差为±38 cm。     

基于变焦数据模型的数字地图的研制

数字地图作为一种新型的地图受到人们越来越广泛的关注。数字地图包含着各种地图数据,为了在多种比例尺范围内能快速地检索地图数据,需要把地图数据分层存贮变焦。作者通过变焦数据模型原理,探讨如何建立多层存贮结构,将数字地图中的大比例尺地图数据库自动导出小比例尺图形。变焦数据模型是一种动态的数据模型, 在该模型中,图形比例尺的变化不是简单的图形尺寸的缩放,而是伴随着各个物体的细节和物体数量而增减。这种基于变焦数据模型建立的数字地图可以提高数据检索与图形表示的灵活性,减少大量不必要的用于重复获取数据而消耗的人力物力,广泛应用于各个领域。     

利用FY-3C卫星GNSS掩星数据分析中国区域对流层顶参数变化

使用FY-3C气象卫星GNSS掩星数据反演得到2017-03-01～2018-02-28大气温度廓线,并估计对流层顶高度变化;然后利用探空气球数据和ERA5模型数据进行验证;最后以2°×2°的空间分辨率将中国区域划分为608个网格,针对每一个单元格,分别计算对流层顶参数,建立格网模型,分析中国区域对流层顶参数的时空分布...