Metamorphic evolution of the Naga Hills eclogite and blueschist, Northeast India: implications for early subduction of the Indian plate under the Burma microplate

Tectonic slices and lenses of eclogite within mafic and ultramafic rocks of the Early Cretaceous–Eocene Naga Hills ophiolite were studied to constrain the physical conditions of eastward subduction of the Indian plate under the Burma microplate and convergence rate prior to the India–Eurasia collision. Some of the lenses are composed of eclogite, garnet-blueschist, glaucophanite and greenschist from core to margin, representing a retrograde hydrothermal alteration sequence. Barroisite, garnet, omphacite and epidote with minor chlorite, phengite, rutile and quartz constitute the peak metamorphic assemblage. In eclogite and garnet-blueschist, garnet shows an increase in Mg and Fe and decrease in Mn from core to rim. In chlorite in eclogite, Mg increases from core to rim. Inclusions of epidote, glaucophane, omphacite and quartz in garnet represent the pre-peak assemblage. Glaucophane also occurs profusely at the rims of barroisite. The matrix glaucophane and epidote represent the post-peak assemblage. The Fe³⁺ content of garnet-hosted omphacite is higher than that of matrix omphacite, and Fe³⁺ increases from core to rim in matrix glaucophane. Albite occurs in late stage veins. P – T pseudosection analysis indicates that the Naga Hills eclogites followed a clockwise P – T path with prograde metamorphism beginning at ∼1.3 GPa/525 °C and peaking at 1.7–2.0 GPa/580–610 °C, and subsequent retrogression to ∼1.1 GPa/540 °C. A comparison of these P – T conditions with numerical thermal models of plate subduction indicates that the Naga Hills eclogites probably formed near the top of the subducting crust with convergence rates of ∼ 55–100 km Myr⁻¹, consistent with high pre-collision convergence rates between India and Eurasia.     

A multiresolution hierarchical classification algorithm for filtering airborne LiDAR data

We presented a multiresolution hierarchical classification (MHC) algorithm for differentiating ground from non-ground LiDAR point cloud based on point residuals from the interpolated raster surface. MHC includes three levels of hierarchy, with the simultaneous increase of cell resolution and residual threshold from the low to the high level of the hierarchy. At each level, the surface is iteratively interpolated towards the ground using thin plate spline (TPS) until no ground points are classified, and the classified ground points are used to update the surface in the next iteration. 15 groups of benchmark dataset, provided by the International Society for Photogrammetry and Remote Sensing (ISPRS) commission, were used to compare the performance of MHC with those of the 17 other publicized filtering methods. Results indicated that MHC with the average total error and average Cohen’s kappa coefficient of 4.11% and 86.27% performs better than all other filtering methods.     

���������ֽ�ؿ��α������о�

?????????????????????У???????????????????????????????о????????????α????????????????????????????????λ???????????С?????????????????????????????????????????У??????????λ??????????????????????????????????????????????????????????????????????????????????????????????????????????????Ч??????????????????????????????????????????????????????е????????С??????????????????????????α????????????????????????????????????????????Ш????????????     

尼泊尔Ms8.1地震构造背景及对周边地区地震活动趋势的影响

分析印度板块与欧亚板块俯冲带、尼泊尔Ms8.1地震震中区地震构造及地震发震构造,讨论主震对余震触发及余震的时空强特征和地震对周边地区地震活动趋势的影响。初步分析认为,主边界断裂为本次地震的发震构造,属于低角度逆冲断层地震;余震分布范围与震源破裂面积和方式基本一致,具有向东迁移的时空特征;西藏定日Ms5.9、聂拉木Ms5.3地震不属于尼泊尔地震余震,是应力扰动的结果;沿俯冲带向东至喜马拉雅东构造结是大震发生的危险地段。     

Holocene beach deposits for assessing coastal uplift of the northeastern Boso Peninsula, Pacific coast of Japan

This paper presents a case study that assessed spatial variations in the tectonic uplift rates of beach deposits in the relict Kujukuri strand plain, situated on the northeastern coast of the Boso Peninsula, eastern Japan. The southern Boso Peninsula is tilted downward to the northeast due to plate subduction along the Sagami Trough. However, the cause of the northeastern coast uplift creating the relict strand plain is unclear, due to the absence of a Holocene raised marine terrace sequence. Elevations and ages of beach deposits were collected from drilled cores and ground-penetrating radar profiles along three shore-normal sections in the southern Kujukuri strand plain. From this, alongshore variations in the relative sea level since the mid-Holocene could be seen. These corresponded to north-to-northeast downward tilting at a rate of 0.4 m/ka for an interval 10 km and are concordant with the longer term tilting of the last interglacial marine terrace surrounding the plain. Although it is difficult to assess shore-normal variations of uplift based on the present dataset, the recognized tilting apparently continues to the tilting of the southern Boso Peninsula, implying the Sagami Trough probably affects the uplift of the Kujukuri coast.     

冈底斯东段泽当大型钨铜钼矿新发现及走滑型陆缘成矿新认识

冈底斯成矿带以斑岩型铜矿(伴生钼矿)为主体,通常作为"挤压型"陆缘岩浆弧—"碰撞裂谷带"斑岩成矿的典型代表而被广泛关注,但层矽卡岩型钨铜钼矿和斑岩型独立钼矿的勘查和研究却未能引起足够的重视,尤其是层矽卡岩型白钨矿的发现,填补了区带矿种的空白;在雅鲁藏布江缝合带边部发现的隐伏斑岩型钼矿,突破了"挤压型"陆缘成矿认识的传统误区。中国冶金地质总局新近发现的冈底斯东段则当钨铜钼矿,既是一处大型钨铜钼矿详查开发基地,又是一组统一于陆缘走滑断裂构造成矿体制作用的钨、铜、钼矿床组合,称为"泽当矿田"。在NWW向雅鲁藏布江缝合带陆缘走滑断裂作用下,早期(68～40.3Ma)拉分型转换构造——NEE向剥离断层,控制了层矽卡岩型钨铜钼矿的形成;在NEE向冲木达陆缘走滑断裂作用下,晚期(30.26～23.62Ma)推闭型转换构造——NWW向逆冲断层,控制了隐伏斑岩型钼矿的形成。层矽卡岩型矿床形成和改造于68～66Ma和57～40.3Ma,叠加富集于斑岩型矿床的形成阶段——30.26～23.62Ma。     

四川宁南跑马铅锌矿床的成矿时代及其地质意义

四川省宁南县跑马铅锌矿床是产于下寒武统麦地坪段白云岩中的层控矿床,主要受层间破碎带控制,有两个含矿层。该矿床是沉积改造型铅锌矿床,Pb+Zn的品位6%～9%,富矿可达30%以上。笔者利用TIMS测试技术获得闪锌矿的Rb-Sr同位素年龄值,结果表明跑马铅锌矿化等时线年龄为(200.1±4.0)Ma,属印支晚期—燕山早期。由于该矿床与云南会泽铅锌矿年龄相近,推断为同一构造-岩浆活动的产物。     

Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil

Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern.     

论扬子板块东北缘的俯冲与回撤对山东地块的影响

通过对山东中生代侵入岩体的时空展布、岩石化学及同位素特征的综合分析研究,提出了扬子板块东北缘俯冲与回撤的演化机制,分析了在这种机制下的成岩、成矿演化规律。认为扬子板块东北缘的俯冲与回撤控制了山东中生代的地质演化过程,其回撤在岩石圈深部造成的真空,导致软流圈物质的隆升,是胶东金矿大规模成矿作用的内在控制因素。