塔里木板块新元古代地层化学蚀变指数研究及其意义

本文应用化学蚀变指数(CIA)方法,研究新疆库鲁克塔格地区新元古代地层,并探讨沉积时期的气候环境。贝义西组总体 CIA 值较低,介于51～56之间,具冰期环境特征。照壁山组 CIA 值为60左右,表明气候有所变暖。阿勒通沟组的CIA 值变化范围在48～61之间,顶部突变为69～71,说明阿勒通沟期经历了另一次寒冷事件,并以温暖环境结束。其上的特瑞爱肯组 CIA 值介于49～53之间,说明第三次经历寒冷干燥的气候环境。扎莫克提组,育肯沟组和水泉组的 CIA 均值为65,反映温暖条件下的沉积环境。新元古代末期汉格尔乔克组 CIA 值下降为56,暗示第四次出现寒冷气候环境。以上特征表明新疆库鲁克塔格地区新元古代的气候环境出现四次冷热交替变化。其中尤为重要的是阿勒通沟组中下部应为寒冷气候环境,而顶部突变为温暖气候环境,因此该组反映了一次明确的从冷到暖的气候变化过程,可以作为贝义西冰期和特瑞爱肯冰期之间的另一次独立冰期。本文的研究成果从地球化学角度支持塔里木板块新元古代四次冰期的划分方案。通过与扬子板块新元古代冰期划分方案的对比,认为塔里木板块新元古代四次冰期的前三次均已在华南板块以冰期或寒冷环境沉积形式出现。     

桩端土加固处理设计及检测方法的探讨

介绍了人工挖孔桩桩端土承载力不足进行旋喷桩处理的设计过程以及处理后检测过程中遇到的问题。桩端土处理设计可以遵循一般的地基处理设计方法和原则,并针对复合地基承载力检测和桩端土极限端阻力的检测中存在的差异和共同点,提出组合静载荷试验的思路和方法,并在工程中予以实施,并取得了较好的效果。     

超长DX桩在软土地区某高层建筑中的应用

DX桩是在钻、冲孔灌注桩基础上发展起来的一种变截面的新桩型。由于其桩身多个扩径体(承力盘或承力岔)能承受较大的荷载,充分发挥扩径体周边土体的承载力,从而大幅度提高单桩承载力。介绍了DX多节挤扩灌注桩及在浙江软土地区某高层建筑桩基工程中的应用效果。     

The Role of History-Dependent Rheology in Plate Boundary Lubrication for Generating One-Sided Subduction

We have developed a two-dimensional dynamical model of asymmetric subduction integrated into the mantle convection without imposed plate velocities. In this model we consider that weak oceanic crust behaves as a lubricator on the thrust fault at the plate boundary. We introduce a rheological layer that depends on the history of the past fracture to simulate the effect of the oceanic crust. The thickness of this layer is set to be as thin as the Earth's oceanic crust. To treat 1-kilometer scale structure at the plate boundary in the 1000-kilometer scale mantle convection calculation, we introduce a new numerical method to solve the hydrodynamic equations using a couple of uniform and nonuniform grids of control volumes. Using our developed models, we have systematically investigated effects of basic rheological parameters that determine the deformation strength of the lithosphere and the oceanic crust on the development of the subducted slab, with a focus on the plate motion controlling mechanism. In our model the plate subduction is produced when the friction coefficient (0.004–0.008) of the modeled oceanic crust and the maximum strength (400 MPa) of the lithosphere are in plausible range inferred from the observations on the plate driving forces and the plate deformation, and the rheology experiments. In this range of the plate strength, yielding induces the plate bending. In this case the speed of plate motion is controlled more by viscosity layering of the underlying mantle than by the plate strength. To examine the setting of the overriding plate, we also consider the two end-member cases in which the overriding plate is fixed or freely-movable. In the case of the freely-movable overriding plate, the trench motion considerably changes the dip angle of the deep slab. Especially in the case with a shallow-angle plate boundary, retrograde slab motion occurs to generate a shallow-angle deep slab.     

Specific variations of air temperature and relative humidity around the time of Michoacan earthquake M8.1 Sept. 19, 1985 as a possible indicator of interaction between tectonic plates

The recent development of the Lithosphere–Atmosphere–Ionosphere (LAI) coupling model and experimental data of remote sensing satellites on thermal anomalies before major strong earthquakes have demonstrated that radon emanations in the area of earthquake preparation can produce variations of the air temperature and relative humidity. Specific repeating pattern of humidity and air temperature variations was revealed as a result of analysis of the meteorological data for several tens of strong earthquakes all over the world. The main physical process responsible for the observed variations is the latent heat release due to water vapor condensation on ions produced as a result of air ionization by energetic α-particles emitted by ²²²Rn. The high effectiveness of this process was proved by the laboratory and field experiments; hence the specific variations of air humidity and temperature can be used as indicator of radon variations before earthquakes.We analyzed the historical meteorological data all over the Mexico around the time of one of the most destructive earthquakes (Michoacan earthquake M8.1) that affected the Mexico City on September 19, 1985. Several distinct zones of specific variations of the air temperature and relative humidity were revealed that may indicate the different character of radon variations in different parts of Mexico before the Michoacan earthquake. The most interesting result on the specific variations of atmosphere parameters was obtained at Baja California region close to the border of Cocos and Rivera tectonic plates. This result demonstrates the possibility of the increased radon variations not only in the vicinity of the earthquake source but also at the border of interacting tectonic plates. Recent results on Thermal InfraRed (TIR) anomalies registered by Meteosat 5 before the Gujarat earthquake M7.9 on 26 of January 2001 supports the idea on the possibility of thermal effects at the border of interacting tectonic plates.     

火山活动与沉积盆地的形成和演化

我国大陆地壳进入中生代以来,发生了较其他陆壳更为强烈的构造运动,印支,燕山,喜马拉雅运动都是发生在我国大陆地壳以裂陷作用为主的典型运动,在中生代板块构造的特定时代和以裂陷作用主主的构造运动作用下,岩浆活动沿断穿骨石圈和地壳的深断裂发生,上涌至地壳地面形成火山岩带和地层格架中的火山岩层,上涌至地壳内部形成壳内流体相央浆房而成为高导层,火山活动是由中生代生成的太平洋板块和我国大陆地壳俯冲,使大陆地壳深     

岩体结构面水力学模型及应用

本文提出岩体结构面适应性平行板模型和该模型的参数确定方法——三段压水试验新解释,新的模型有益于克服将结构面圆盘模型应用于地下水模拟中的局限性;基于结构面起伏度对地下水流动的影响,导出了起伏度修正系数解析表达式。     

元古宙蛇绿岩研究现状及其板块构造意义

在回顾元古宙蛇绿岩研究简史的基础上,对元古宙蛇绍岩的时空分布特征,岩石组合类型,变质作用程度,大地构造背景及源区地球化学制约等进行了系统总结,并就元古宙蛇绿岩的板块构造意义作了探讨。     

A note on the relationship between dip-slip fault parameters and plate parameters in the two-dimensional modelling of preseismic deformation

Preseismic lithospheric deformation at a subduction zone can be modelled as dip-slip dislocation on an inclined fault or as flexure of a thin plate. Both these models predict a region of positive topography known as forebulge or outer rise. By matching the location and the magnitude of the forebulge, we derive useful relations between the dip-slip fault parameters and the plate parameters. In particular, we determine the width of a long dip-slip fault of given dip corresponding to a semi-infinite plate of given thickness. The displacement profiles of the two models are also compared.