TEMPORAL SPATIAL VARIATION CHARACTERISTICS OF CRUST DEFORMATION OF ACTIVE TECTONIC BLOCKS IN NORTH CHINA

1　IntroductionTomonitorthecurrentcrustalmotionandearthquakehazardsinNorthChinaarea,theFirstCrustalMonitoringandApplicationCenter (FC MAC)oftheChinaEarthquakeAdministration(CEA)hasestablishedaGlobalPositioningSystem(GPS)monitoringnetworkinNorthChinaandtheCapital(Beijing)Circlearea .TheobservedstationsaremainlydistributedinthenorthernpartofNorthChinaandCapitalCirclearea (Fig .1 ) .Theregionisbetween 1 0 7°Eand 1 2 2°E (about 1 40 0km) ,andbetween 33°Nand 42°N (about 80 0km) .…     

THREE-DIMENSIONAL DEFORMATION CHARACTERISTICS OF THE XIANSHUIHE FAULT ZONE

In order to analyze 3-dimensional movement and deformation characteristics and seismic risk of the Xianshuihe fault zone, we inverted for dynamic fault locking and slip deficit rate of the fault using the GPS horizontal velocity field of 1999-2007 and 2013-2017 in Sichuan-Yunnan region, and calculated annual vertical change rate to analyze the vertical deformation characteristics of the fault using the cross-fault leveling data during 1980-2017 locating on the Xianshuihe fault. The GPS inversion results indicate that in 1999-2007, the southeastern segment of the fault is tightly locked, the middle segment is less locked, and the northwestern segment is basically in creeping state. In 2013-2017, the southeastern segment of the fault is obviously weekly locked, in which only a patch between Daofu-Bamei is locked, and the northwestern segment is still mostly in creeping state, in which only a patch at southeastern Luhuo is slightly locked from surface to 10km depth. The cross-fault leveling data show that annual vertical change rate of the Zhuwo, Gelou, Xuxu and Goupu sites on the northwestern segment is larger, which means vertical movement is relatively active, and annual vertical change rate of the Longdengba, Laoqianning, and Zheduotang sites on the southeastern segment is small, which means the fault is locked, and the vertical movement changes little before and after the Wenchuan earthquake. Combining with the 3-dimensional movement and deformation, seismic activity and Coulomb stress on the Xianshuihe Fault, we consider the seismic risk of the southeastern segment is larger, and the Wenchuan earthquake reduced the far-field sinistral movement and the fault slip deficit rate, which may reduce the stress and strain accumulation rate and relieve the seismic risk of the southeastern segment.     

辽宁省海岸带主要河口区一万年来沉积速率及海平面波动情况

采用钻探手段,通过14C、OSL测年,利用4孔岩心,计算了辽宁省海岸带主要河口区一万年来沉积速率,并分析了海平面波动情况.研究表明,辽宁海岸带长期平均的河口海岸区的沉积速率较低.其中,辽东半岛东北部黄海海岸带鸭绿江平原全新世早期处于剥蚀环境,大洋河平原全新世平均沉积速率为1.4 mm/a,辽东湾北部下辽河平原全新世平均沉积速率为1.52 mm/a,辽西海岸带大凌河冲积扇全新世平均沉积速率为1.87mm/a.全新世Ⅰ海相层或海陆过渡相层总体上表现为一次海侵,与下辽河平原区盘山海侵相对应,但各地段海平面波动情况不尽一致.     

吉林向海沼泽湿地典型剖面沉积及年代序列重建

沼泽湿地发育过程中堆积的各类沉积物真实地记录下区域环境演变与沼泽湿地发育过程。本文以无尾河下游漫流区——向海沼泽湿地为研究对象,对其典型沉积剖面结构、沉积物容重、年龄指标、沉积速率等多项沉积记录进行了综合剖析。结果表明：沼泽沉积物的层序关系可以揭示沼泽的形成途径及环境变化;溪边沼泽接受更多的矿质沉积物;1880-1885年该区域出现河道变迁的痕迹;向海沼泽湿地沉积速率与典型的河口三角洲类似,体现了河口尾端湿地的特点;近50年来,向海沼泽湿地沉积速率急剧上升,其原因可能与解放后该流域人类活动增强、植被破坏、水土流失严重有关,在时间上,与流域上游大型露天煤矿开采时段有较好的耦合性。     

香鱼(Plecoglossus altivelis)排卵后卵内油球、酶活、丙二醛及受精率、孵化率的变化

以香鱼卵母细胞为研究对象,采用观察卵内油球、有关酶的活力、以及卵的受精率和孵化率等变化的方法,研究了香鱼卵母细胞长时效演化的相关机理,结果表明,随着香鱼卵在腹腔内保存时间的延长,卵内油球从0h的油球直径≤10μm,且均匀分布,逐渐融合增大,至108h增大到120μm,油球数仅有5—6个。同时,SOD、POD的活力及MDA含量均呈先升后降的变化趋势,最大峰值分别出现在60h、36h和24h。随着油球和酶活的变化,卵子质量逐渐下降,表现为受精率和孵化率的降低:排卵后24h、48h、72h、96h的受精率分别为94.37%、88.19%、50.20%、10.83%,孵化率分别为85.78%、68.14%、25.54%、0.53%。     

Rapid assessment of beta dose variation inside cobbles,and implications for rock luminescence dating

Variation in beta dose rate within rocks may impact the results of rock surface luminescence dating, for both the burial age of cobbles and exposure age of rock surfaces. Current methods of rock surface luminescence dating assume that radionuclides are homogeneously distributed inside rocks. In this study, two rapid methods based on beta counting and on a portable XRF instrument were developed to measure the radioactivity of rock slices. These methods were applied to rock slices from four glaciofluvial granite cobbles that had previously been used for equivalent dose determination to test whether beta dose variation could be observed. Results from beta counting and K content from XRF show similar patterns and both vary along the depth profiles, but the magnitude of this variability is very different amongst the four cobbles. In rocks where the dose rate is highly variable, bleaching may not be the only source of variation of L_n/T_n or equivalent dose (D_e) along the luminescence-depth profile of cobbles, and it may be necessary to measure the beta dose rate for every single slice to determine whether multiple bleaching events are recorded or variations in D_e are due to dose rate heterogeneity.     

The evolution of pore pressure fields around standard and ball penetrometers: influence of penetration rate

Rate effects are examined in the steady pore pressure distribution induced as a result of penetration of standard and ball penetrometers. The incompressible flow field, which develops around the penetrometer is used to define the approximate soil velocity field local to the penetrometer tip. This prescribes the Lagrangian framework for the migration of the fluid saturated porous medium, defining the advection of induced pore pressures relative to the pressure‐monitoring locations present on the probe face. In two separate approaches, different source functions are used to define the undrained pore fluid pressures developed either (i) on the face of the penetrometer or (ii) in the material comprising the failure zone surrounding the penetrometer tip. In the first, the sources applied at the tip face balance the volume of fluid mobilized by the piston displacement of the advancing penetrometer. Alternately, a fluid source distribution is evaluated from plasticity solutions and distributed throughout the tip process zone: for a standard penetrometer, the solution is for the expansion of a spherical cavity, and for the ball penetrometer, the solution is an elastic distribution of stresses conditioned by the limit load embedded within an infinite medium. For the standard penetrometer, the transition from drained to undrained behavior occurs over about two orders of magnitude in penetration rate for pore pressures recorded at the tip (U1) and about two‐and‐a‐half orders of magnitude for the shoulder (U2). This response is strongly influenced by the rigidity of the soil and slightly influenced by the model linking induced total stresses to pore pressures. For the ball penetrometer, the transition from drained to undrained behavior also transits two‐and‐a‐half orders of magnitude in penetration rate, although it is offset to higher dimensionless penetration rates than for standard penetration. Copyright © 2012 John Wiley & Sons, Ltd.     

青藏高原的隆起与海洋锶同位素组成的演化

近年来,随着构造隆升驱动气候变化假说的提出,青藏高原的隆起受到越来越多的关注,并将之与大陆化学风化速率及海洋锶同位素的演化紧密联系。围绕青藏高原的隆升及其环境与气候效应,对海洋锶同位素组成的演化特征及其影响因素的较为全面而详细的论述表明:将青藏高原的隆升与全球气候变化、大陆化学风化速率及海洋锶同位素组成的演化相联系,也许是解决目前关于海洋锶同位素组成的演化及其物源问题的重要手段,根据海洋锶同位素的演化历史来研究全球气候变化规律及青藏高原的构造演化历史将是本研究领域的重点。     

Hydrothermal Alteration Zoning and Kinetic Process of Mineral-Water Interactions

This study reports the kinetic experimental results of albite in water and in KCI solution at 22 MPa in the temperature range of 25 to 400℃. Kinetic experiments have been carried out in an open flow-through reaction system (packed bed reactor). Albite dissolution is always incongruent in water at most temperatures, but becomes congruent at 300℃ (close to the critical point 374℃). At temperatures from 25 to 300℃, the incongruent dissolution of albite is reflected by the fact that sodium and aluminum are easily dissolved into water; from 300 to 400℃ it is reflected by silicon being more easily dissolved in water than Al and Na. Maximum albite dissolution rates in the flow hydrothermal systems have been repeatedly observed at 300℃, independent of flow rates.The kinetic experiments of albite dissolution in a KCl aqueous solution (0.1 mol KCl) indicate that the dissolution rate of albite increases with increasing temperature. Maximum silicon release rates of albite have been observed at 400℃, while ma