Further Studies Of Atmospheric Turbulence In Layers Near The Surface: Scaling The Tke Budget Above The Roughness Sublayer

The second of two experimental studies of the TKE budget conducted on sites of different roughness is described, and results are compared. The first took place within a shallow layer above a small field of mostly bare, cultivated soil; the second was carried out above a roughness sublayer of significant depth on an extensive plain of tall dry grass. Budget terms observed in the second study were scaled with a modified u which compensated for effects of an unusually large stress gradient and ensured that the _m functions would be collinear. By showing that the modification becomes negligible in smaller gradients, it is demonstrated that in normal conditions, budgets observed above significant roughness sublayers should be normalized by scaling in terms of the unreduced Reynolds stress at the sublayer's upper surface. This procedure is shown to be consistent with the expectation that TKE budgets in layers near the surface all scale in fundamentally the same way.Other findings include: (1) the fact that most _m functions previously reported are not quite collinear is attributed to a type of overspeeding known to affect three-cup anemometers; (2) revised _m functions, collinear and largely free of the effects of overspeeding, are determined from a well-established characteristic of the linear _m relation for the stable case; (3) data that define collinear _m functions can also be represented with single hyperbolic curves; (4) dissipation is found to be 10 to 15% too small to balance total TKE production in unstable and neutral conditions and to decrease with increasing z/L in thestable regime; and (5) new relations for based on the observed behaviour of the dissipation deficit provide an improved closure for the set of equations that express the budget terms as functions of _m and z/L.     

Simulation of Atmospheric Boundary Layer Characteristics during Indian Summer Monsoon using Observations from Monsoon Trough Boundary Layer Experiment at Jodhpur, India

The diurnal structure of the boundary layer during Indian summer monsoon period is studied using a one-dimensional meteorological boundary layer model and the observations collected from the Monsoon Trough Boundary Layer Experiment conducted in 1990 at Jodhpur, India. The model was initialized with the observed temperature profiles at 0530 LST on 17 July, 1990 at Jodhpur and was run for 26 hours. The study is carried out with a geostrophic wind speed of 9.5 m s⁻¹ corresponding to the strong wind simulation. The mean thermodynamic and wind structure simulated by the model are in good agreement with those observed from 30 m tower. The computed surface layer characteristics such as the surface fluxes, TKE and standard deviations of velocity components are found to be reasonably in good agreement with those based on turbulence measurements. The shear and buoyancy budget computed from the model are also compared with the turbulence measurements. The integrated cooling budget in the nocturnal boundary layer is examined.     

The visualization of turbulence data using a wavelet‐based method

This technical communication presents some MATLAB^® routines for visualizing the structure in turbulent signals based on a standard conditional averaging and thresholding approach. Up to three velocity components may be analysed and the resulting output highlights the time at which important flow events occur as well as the frequency levels that contribute the greatest energy to this particular event. The latter information is derived from a wavelet decomposition of the signal and may assist in providing a process‐based explanation of observed flow features. Copyright © 2006 John Wiley & Sons, Ltd.     

环境地转基本气流的计算及热带气旋运动与其偏差的统计分析

利用国家气象中心T63L16的1.875×1.875经纬网格点资料和中央气象台编号的热带气旋实时中心位置资料,计算了1996年全年25个热带气旋,共126个时次的环境地转基本气流,分析了环境地转基本气流的垂直分布特征,并对热带气旋的实际运动与环境地转引导气流的偏差(后文将称其为引导偏差,即热带气旋的实际中心位置与按引导气流推算出的位置之间的偏差)进行了分析,发现引导气流的计算区域不同,其引导偏差是不一样的。得到了引导气流的最佳计算区域,并且发现热带气旋运动与环境地转基本气流的垂直切变结构的关系以及引导偏差与引导气流的速度、气旋本身的初始纬度位置和强度等有关。结果还表明,200～1000 hPa的深层加权平均的基本气流的引导效果最佳,可作为最佳引导气流使用。了解这些规律和特征,对热带气旋运动预报具有一定的参考意义。     

INVESTIGATION ON GEOSTROPHIC ADJUSTMENT,FRONTOGENESIS AND OSCILLATIONS

Geostrophic adjustment and frontogenesis are examined by means of the 2-D ARPS model.The simulation shows that.without the large-scale forcing,both the frontogenesis and frontolysisare observed during the geostrophic adjustment process and the intensity of the front oscillates inthe case of no discontinuity.The convergence (divergence) induced by the secondary circulation isthe most important factor for frontogenesis (frontolysis) at the top and bottom boundaries.Theamplitude and period of oscillation are dependent on the initial atmospheric stratification and theCoriolis frequency,and they are related to the inertio-gravity wave.     

VERTICAL STRUCTURE OF SECOND-MOMENT TURBULENT VARIABLES*

Two kinds of observational data,fluctuation and mean profile measurements,from a 325 m meteorological tower in Beijing,China,are used to evaluate local scales of velocity and temperature for higher heights by flux-gradient mean profiles and eddy-correlation techniques.A comparison of these methods each other was made in terms of vertical turbulence fluxes for momentum and beat at the same heigbt.The vertical profiles of non-dimensional second moments.such as vertical turbulent fluxes of momentum and heat.velocity and temperature standard deviations,were derived by local similarity theory.The local similarity relations expressed that the vertical distributions of non-dimensional second moment variables were found to be functions of z/Λ and z/h in the stable boundary layer and the function of z/Z_i for the convective boundary layer,where A the local Monin Obukhov(M-O) length. h the height of stable boundary layer and Z_i the height of mixed-layer.These relations are shown to agree well with the observational data.     

Computational fluid dynamics modelling of boundary roughness in gravel‐bed rivers: an investigation of the effects of random variability in bed elevation

Results from a series of numerical simulations of two‐dimensional open‐channel flow, conducted using the computational fluid dynamics (CFD) code FLUENT, are compared with data quantifying the mean and turbulent characteristics of open‐channel flow over two contrasting gravel beds. Boundary roughness effects are represented using both the conventional wall function approach and a random elevation model that simulates the effects of supra‐grid‐scale roughness elements (e.g. particle clusters and small bedforms). Results obtained using the random elevation model are characterized by a peak in turbulent kinetic energy located well above the bed (typically at y/h = 0·1–0·3). This is consistent with the field data and in contrast to the results obtained using the wall function approach for which maximum turbulent kinetic energy levels occur at the bed. Use of the random elevation model to represent supra‐grid‐scale roughness also allows a reduction in the height of the near‐bed mesh cell and therefore offers some potential to overcome problems experienced by the wall function approach in flows characterized by high relative roughness. Despite these benefits, the results of simulations conducted using the random elevation model are sensitive to the horizontal and vertical mesh resolution. Increasing the horizontal mesh resolution results in an increase in the near‐bed velocity gradient and turbulent kinetic energy, effectively roughening the bed. Varying the vertical resolution of the mesh has little effect on simulated mean velocity profiles, but results in substantial changes to the shape of the turbulent kinetic energy profile. These findings have significant implications for the application of CFD within natural gravel‐bed channels, particularly with regard to issues of topographic data collection, roughness parameterization and the derivation of mesh‐independent solutions. Copyright © 2001 John Wiley & Sons, Ltd.     

Three‐dimensional flow structure around small‐scale bedforms in a simulated gravel‐bed environment

Pebble clusters are common small‐scale morphological features in gravel‐bed rivers, occupying as much as 10 per cent of the bed surface. Important links exist between the presence of pebble clusters and the development of flow structures. These links are poorly understood at the three‐dimensional level. Particularly neglected has been the effect of clusters on the lateral flow characteristics. A laboratory study was conducted using a hydraulic flume, within which simulated pebble clusters were superimposed onto a plane bed of gravel material. High‐resolution three‐dimensional flow data were collected above the bed at two different flow depths using an acoustic Doppler velocimeter. The results present evidence of the importance of lateral flow in the development of turbulent flow structure. Narrow regions of high lateral and downstream turbulence intensity exist to both sides of clusters and in a three‐dimensional separation zone in their lee. This may indicate the presence of horseshoe‐type vortical structures analogous to those identified in less hydraulically rough environments. However, it is likely that these structures are more complicated given the mutual interference of the surrounding medium. The lateral flow was also identified as a key component in the upwelling identified by other authors in the lee of pebble clusters. The results of the vertical flow analysis confirm the hypothesis that six regions with distinct vertical flow characteristics exist above clusters: flow acceleration up the stoss‐side of the cluster; recirculation behind the cluster in the wake region; vortex shedding from the pebble crest and shear layer; flow reattachment downstream of the cluster; upwelling of flow downstream of the point of reattachment; and recovery of flow. Copyright © 2001 John Wiley & Sons, Ltd.     

An experimental study on the ripple–dune transition

Flume experiments were conducted on different bed stages across the ripple–dune transition. As flow velocity increases, an initially flat bed surface (made of fairly uniform sandy material) is gradually transformed into a two‐dimensional rippled bed. With further increase in velocity, two‐dimensional ripples are replaced by irregular, linguoid ripples. As the average velocity necessary for the ripple–dune transition to occur is imposed on the bed surface, these non‐equilibrium linguoid ripples are further transformed into larger, two‐dimensional dunes. For each of these stages across the transition, a concrete mould of the bed was created and the flow structure above each fixed bed surface investigated. An acoustic Doppler velocimeter was used to study the flow characteristics above each bed surface. Detailed profiles were used along a transect located in the middle of the channel. Results are presented in the form of spatially averaged profiles of various flow characteristics and of contour maps of flow fields (section view). They clearly illustrate some important distinctions in the flow structure above the different bedform types associated with different stages during the transition. Turbulence intensity and Reynolds stresses gradually increase throughout the transition. Two‐dimensional ripples present a fairly uniform spatial distribution of turbulent flow characteristics above the bed. Linguoid ripples induce three‐dimensional turbulence structure at greater heights above the bed surface and turbulence intensity tends to increase steadily with height above bed surface in the wake region. A very significant increase in turbulence intensity and momentum exchange occurs during the transition from linguoid ripples to dunes. The turbulent flow field properties above dunes are highly dependent on the position along and above the bed surface and these fields present a very high degree of spatial variability (when compared with the rippled beds). Further investigations under natural conditions emphasizing sediment transport mechanisms and rates during the transition should represent the next step of analysis, together with an emphasis on quadrant analysis. Copyright © 2001 John Wiley & Sons, Ltd.