苏鲁超高压变质带北部地球物理调查(1)─—深反射地震

苏鲁超高压变质带是世界上研究陆一陆碰撞俯冲和壳幔作用的最佳地质场所之一．为了解超高压变质带岩石的形成、折返和相应的动力学过程,必须了解该区的地壳和浅地幔构造．本文介绍了该区北部的地质情况和进行深反射地震调查取得的成果,包括（１）在五莲─青岛断裂南侧超高压变质岩片向北倾斜,呈现叠复组构,反映岩片的折返;（２）根据地震资料推测在１４６Ｍａ前后胶南地块的隆升一伸展构造内幕;（３）超高压变质岩片厚约１２ｋｍ,由于含有大量相辉岩透镜体,地震波速高达６．８─７．３ｋｍ／ｓ;（４）莫霍面附近有许多楔形反射体,反映陆一陆碰撞;（５）石门地区７ｋｍ深处存在高波速的强反射体,可作为在该区进行大陆科学钻探的候选场址．     

Turbulence fields in the lee of two‐dimensional transverse dunes simulated in a wind tunnel

The turbulence field of airflow in the lee of a dune has significant impacts on dune dynamics and related processes. We used particle image velocimetry in a wind tunnel simulation to obtain detailed velocity measurements in the lee of two‐dimensional transverse dune models, then used the results to analyse their turbulence fields. The dune models used in this study had a single lee angle of 30°, and a total of six stoss angles: 3°, 5°, 10°, 15°, 20° and 25°. We used vorticity, turbulence intensity, Reynolds stress and turbulent kinetic energy to characterize the turbulence fields. These parameters were functions of stoss angle, wind velocity, distance from the dune crest and height above the ground surface. The stoss angles could generally be divided into two groups based on the profiles of mean velocity, turbulence and Reynolds stress. Stoss angles of 3° and 5° usually had similar profiles, and angles of 15°, 20° and 25° formed a second group with similar profiles. The profiles for the stoss angle of 10° were usually transitional and were intermediate between the two groups. Vorticity, Reynolds stress and turbulent kinetic energy increased monotonically with increasing free‐stream wind velocity, but their variations with respect to the stoss angle were complex. The stoss angles of 15° and 20° had the maximum values of these three parameters, thus these angles may have special significance in dune development given the characteristics of the mean velocity fields and turbulence fields they produce within the lee airflow. It is the streamwise velocity component and its turbulence that determine the surface shear stress. Copyright © 2008 John Wiley and Sons, Ltd.     

Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

雷达图像中的转换构造信息及其应用

低序次断裂是地壳变形的直接产物，具有丰富的构造变形信息，经过转换的低序次构造。形式多样，图案复杂，是构造研究的重要对象，也是地表稳定性研究的重要基础。利用香港地区航空雷达图像资料，提取其中低序次构造的弱信息，建立转换变形模型，以分析区内不稳定地表的构造背景。区内北东向断裂是主要构造，其右行剪切形成一系列低序次R面，P面，R^1面构造，在雷达图像上表现为线性弱信息并且与微地貌发育有关。利用线性构造增强，提取技术和低序次构造组合分析方法，结合野外地质调查，确定马鞍山地区EW向的张性破裂是NE向张剪断裂的转换，是造成马鞍山滑坡的重要地质因素。     

浅谈野外岩心地质编录工作

岩心地质编录是收集和观察研究岩心中所赋存的各种地质信息和地质现象的一项重要的基础性地质工作。本文根据具体实践经验，简要介绍了岩心地质编录工作的3个阶段以及贯穿于编录工作始终的取样工作。     

发挥高精度磁测作用的几个实例

简要介绍了高精度磁测的应用现状.通过金厂沟金矿区辽河群大石桥岩组与盖县组接触界限的划分,以及阜新建设花岗岩与长英质糜棱岩边界的划分等实例,说明得用高精度磁测结果,在配合地质填图、划分地质界线、圈定矿体和寻找古墓及古坑道等地质问题方面的优越性.用于隐伏区地质填图时,不仅能确定强磁性岩石边界,而且还能确定弱磁性岩石边界.在提高信息密度的前提下,根据磁化率K值和剩余磁化强度Jr值的不同,在典型成矿区能直接圈定弱磁性矿体.     

低氟与大骨节病－－大骨节病防治拾趣四则

该文笔者多年研究大骨节病原始原因的一项新说。即病区外环境低氟。引起体内以低氟为中心的代谢紊乱，从而导致以骨骼系统为主的病变－大骨节病。防治该病，应向体外补氟。药疗这一进补方式故然必然，但最有效又生活化的办法是食疗。食疗又分氟盐防治和饮茶防治两种。而最适用且简便的方法是提倡患区人群适度饮茶，并且应从儿时做起。关于补氟和饮茶等防治大骨节病的实践，笔者已浓缩于下面四则拾趣之中……。     

无线电波坑透曲线特征探讨

论述了不同的地质构造因素对坑透的影响,总结了不同形态坑透综合曲线所反映的构造特征,并就资料解释谈了几点体会.     

地质资料存储方式的转变--浅谈地质资料光盘存储工作

本文分析了地质资料管理的现状;指出地质资料光盘存储是实现地质资料现代化管理的第一步,重点介绍了地质资料光盘存储工作的内容和过程,以及作者在工作实践中的几点体会;指出了地质资料光盘存储工作是实现地质资料存储方式转变,实现地宣现代化的重要基础。     

广昌付坊花岗岩地质特征及侵位机制

付坊花岗岩出露在武夷山西坡中段。在１：５万广昌县幅区调工作中,通过对其岩性、化学万分、结构、构造等演化特征的研究,将其划分为洋背、高洲、胡竹、太和、石咀圩５个单元,归并为一个超单元;根据其Ｕ－Ｐb法同位素年龄确定其侵位时代为晚奥陶世,属加里东造山期岩浆活动的产物;侵位机制属早期底辟、晚期轻气球膨胀强力型主动就位。