Exploiting the dual functions of polymer depressants in fine particle flotation

Fine hydrophilic particles are known to be entrained with water in flotation of many ores. Flocculation of the hydrophilic particles by polymer depressants could potentially reduce the mechanical entrainment of these particles. This paper reports testwork completed on fine particles of several solids, iron oxide, hydroxyapatite and sphalerite, as well as on a relatively coarse quartz sample (− 75 + 38 μm). Dodecylamine was used as a collector for quartz, and several dispersants and polymer depressants, including sodium silicate, sodium metaphosphate, zinc sulfate, cornstarch, corn dextrin and carboxymethyl celluloses (with molecular weights of both 700,000 and 80,000) were used as flotation modifiers. The major part of the testwork involved flotation tests in a 200 mL flotation column. It was observed that flocculation of the fine hydrophilic particles significantly reduced their mechanical entrainment, while dispersion severely aggravated it. Thus, in the flotation separation of synthetic mixtures of the − 75 + 38 μm quartz and fine (reagent grade) iron oxide or hydroxyapatite, polymer depressants that caused flocculation performed better than those that did not cause flocculation.     

Plerospheres and their role in reduction of emitted fine fly ash particles

Particles, less than PM10 in size, emitted from the stack of pulverized coal-fired power plants are of environmental concern since they can easily enter the human respiratory track. These fine particles are examined by Scanning Electron Microscope/Electron Dispersive Spectrometry （SEM/EDX）. Plerospheres are found in fly ash and are particles containing smaller particles formed during combustion of coal. The large plerospheres 〉50 μm mostly are present in ESP fly ash, indicating that they are effectively capturing fine particles and reducing their stack emission.     

The ＂CO2-rich gas vents＂ of Mt. Amiata volcano （Tuscany, Central Italy）： Geochemistry,genetic mechanism and hazard evaluation

Mt. Amiata （Southern Tuscany, Central Italy） is an extinct Quaternary volcano located in an area still marked by high heat-flow that is caused by deep seated （6-10 km） hot masses related to Pliocene magmatic activity. The anomalous geothermal gradient gives rise, within the Mesozoic limestone formation （Tuscan series）, to geothermal systems that fed the Ca-SO4 thermal springs characterizing this area. Besides of thermal fluids, several cold, dry CO2-rich gas emissions seep out on the NE flank of the volcano. These gas vents mostly consist of large sub-circular craters at variable depth and diameter （5-15 m and 10-50 m, respectively）, and represent a serious hazard for the local population, as testified by the several asphyxia casualties that have been repeatedly occurred within these morphological depressions. In this work, the chemical and isotopic compositions of the Mt. Amiata ＂CO2-rich gas vents＂ and the estimation of both the CO2 flux from the soil and the CO2 distribution in air of their surroundings, has been carried out in order to： （1） assess the origin of gases, （2） recognize the mechanism of formation for these gas emissions and their relationship with local tectonics, and （3） to evaluate the CO2 hazard in the high flux emanations. The chemical composition of the gases is largely dominated by CO2 （up to 98 % by vol） and shows relatively high concentrations of N2, CH4 and H2S （up to 1.1%, 0.9% and 3.9 % by vol, respectively）. These features, coupled with the carbon and nitrogen isotopic signatures, suggest that the origin of the main gas compounds may be related to the contribution of deep （i.e., thermometamorphic processes on carbonate formations for CO2） and shallow （i.e. thermal decomposition of organic material for CH4, N2 and H2S） sources.     

Structural architecture of a highly oblique divergent plate boundary segment

The Reykjanes Peninsula in southwest Iceland is a highly oblique spreading segment of the Mid-Atlantic Ridge oriented about 30° from the direction of absolute plate motion. We present a complete and spatially accurate map of fractures for the Reykjanes Peninsula with a level of detail previously unattained. Our map reveals a variability in the pattern of normal, oblique- and strike-slip faults and open fractures which reflects both temporal and spatial strain partitioning within the plate boundary zone. Fracture density varies across the length and width of the peninsula, with density maxima at the ends and at the northern margin of the zone of volcanic activity. Fractures with similar strike cluster into distinct structural domains which can be related to patterns of faulting predicted for oblique extension and to their spatial distribution with respect to volcanic fissure swarms. Additional structural complexity on the Reykjanes Peninsula can be reconciled with magmatic periodicity and associated temporal strain partitioning implied by GPS data, as well as locally perturbed stress fields. Individual faults show variable slip histories, indicating that they may be active during both magmatic and amagmatic periods associated with different strain fields.     

Continuous air rate measurement in flotation cells: Some fundamental considerations

A robust and reliable sensor to measure gas (air) superficial velocity (J_g) continuously in flotation systems is introduced. It is based on the sampling of bubbles by buoyancy with the accumulating air allowed to exit through an orifice. At steady state, pressure drop is measured and related to the J_g by prior calibration. The continuous device is readily automated and extended to a multi-unit set-up. The sensor and data collections are described. The governing gas flow equation and models of the dynamic response to air flow rate set point change and fluctuations in froth depth are derived. Model predictions are confirmed against plant data. By taking a moving average, the J_g remains valid in the face of typical plant disturbances.     

Hydrogen isotope of individual n-alkanes from modern sediments and their application to environments

Hydrogen isotopes are commonly fractionated to a much greater extent and as a result display larger variations in δ values, In terms of the hydrogen isotope ratios of individual n-alkanes of 16 samples of modern sediments selected from four different locations in the southern part of Gansu, China, the δD values for most of the n-alkanes varied from -150‰-300‰, Variations in δD also occurred between different ranges of n-alkanes, effects of environmental changes on the hydrogen isotopic compositions of individual n-alkanes have been detected. Besides the δD values of n-alkanes, the δD values of lipids including pristane （Pr）, phytane （Ph） were also examined, by the combination of D/H ratios with molecular fingerprinting, Our results further support the notion that hydrogen isotopes of n-alkanes from modern sediments can act as paleoclimatic and paleoenvironmental proxies and provide invaluable new sources of information in the research of paleoenvironment reconstruction.     

Effect of particles on the photodegradation of PAHs in natural waters-A case study for the Yellow River

Photodegradation of chrysene, benzo （a） pyrene and benzo （g, h, i） perylene in natural water of the Yellow River was studied using simulation sunlight. The effects of particulates on the photodegradation were explored. Several results arose from this study. （1） The photodegradation of PAHs can be fitted with first-order kinetics when no particulate exists in water system, and the first-order constant increases with decreasing of initial concentration of PAHs. The photodegradation rates of the three PAHs are related to their molecule absorption spectrum. （2） The existence of loess exerts two kinds of effects on the photodegradation of PAHs, including the inner filter effects and the photosensitizing effects of humic substance in loess. These two contrary effects lead to the difference of net effects among different contents of loess. When the loess contents are 0.1 and 5.0 g/L, the existence of loess stimulates the photodegradation of chrysene, benzo （a） pyrene. When the loess content is 5.0 g/L, the existence of loess stimulates the photodegradation of benzo （g, h, i） perylene. In addition, the photodegradation of PAHs can be fitted with the second-order kinetics when there is loess in the water system. （3） The soluble humic substances in loess can accelerate the photodegradation of PAHs while the in soluble part cannot. （4） Since the soluble humic substances in the suspended solids of the river have been dissolved in water,     

On the Importance of Geolithological Features for the Estimate of the Site Response: The Case of Catania Metropolitan Area (Italy)

The evaluation of seismic site response in the urban area of Catania was tackled by selecting test areas having peculiar lithological and structural features, potentially favourable to large local amplifications of ground motion. The two selected areas are located in the historical downtown and in the northern part of Catania where the presence of a fault is evident. Site response was evaluated using spectral ratio technique taking the horizontal- to-vertical component ratio of ambient noise. Inferences from microtremor measurements are compared with results from synthetic accelerograms and response spectra computed at all drillings available for this area. Such method is particularly suitable in urban areas where the nature of the outcropping geological units is masked by city growth and anthropic intervention on the surface geology. The microtremor H/V spectral ratios evaluated at soft sites located within the downtown profile tend to be smaller than that usually reported in the literature for such soils. A tendency for amplifications to peaks near 2 Hz is observed only in some sites located on recent alluvial deposits. Evidences for amplifications of site effects (frequency range 4–8 Hz) were observed in the sampling sites located on the fault, with a rapid decrease of spectral amplitude just a few tenths of metres away from the discontinuity. Numerical simulations evidenced the importance of geolithological features at depth levels even greater than 20–30 m. Besides this, the results strongly confirm the importance of the subsurface geological conditions, in the estimate of seismic hazard at urban scale.     

Assessing the Vibrational Frequencies of the Cathedral of Cologne (Germany) by Means of Ambient Seismic Noise Analysis

Ambient seismic noise measurements were conducted inside the Cathedral of Cologne (Germany) for assessing its frequencies of vibration and for checking whether these occur in the range where soil amplification is expected. If this is the case, damages may increase in case of an earthquake due to an increased structural response of the building. Analysis of the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building as well as the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed in the basement of the cathedral indicated several modes of vibration. Facilitated by these results an assessment of the seismic vulnerability was attempted for a 2D ground motion scenario using the finite element method.     

Use of electrical resistivity methods for detecting subsurface fresh and saline water and delineating their interfacial configuration: a case study of the eastern Dead Sea coastal aquifers, Jordan

The alluvial aquifer is the primary source of groundwater along the eastern Dead Sea shoreline, Jordan. Over the last 20 years, salinity has risen in some existing wells and several new wells have encountered brackish water in areas thought to contain fresh water. A good linear correlation exists between the water resistivity and the chloride concentration of groundwater and shows that the salinity is the most important factor controlling resistivity. Two-dimensional electrical tomography (ET) integrated with geoelectrical soundings were employed to delineate different water-bearing formations and the configuration of the interface between them. The present hydrological system and the related brines and interfaces are controlled by the Dead Sea base level, presently at 410 m b.s.l. Resistivity measurements show a dominant trend of decreasing resistivity (thus increasing salinity) with depth and westward towards the Dead Sea. Accordingly, three zones with different resistivity values were detected, corresponding to three different water-bearing formations: (1) strata saturated with fresh to slightly brackish groundwater; (2) a transition zone of brine mixed with fresh to brackish groundwater; (3) a water-bearing formation containing Dead Sea brine. In addition, a low resistivity unit containing brine was detected above the 1955 Dead Sea base level, which was interpreted as having remained unflushed by infiltrating rain.