高坪-吉心段公路喀斯特工程地质综合勘察

以沪蓉国道主干线湖北省高坪-吉心段的喀斯特地质勘察工作为例，探讨喀斯特地区公路工程地质综合勘察的基本方法。在喀斯特地区运用遥感和地理信息技术技术、地质测绘、综合物探以及地质钻探等勘察手段，通过综合分析各种勘探成果，能够较准确地查明可溶岩的分布、喀斯特形态类型、分布规律、控制因素以及喀斯特水的赋存、分布和运移规律等，并根据不同的喀斯特地貌提出了有针对性的处理对策。通过不断的实践和经验总结。针对喀斯特工程地质问题合理运用综合工程勘察方法，能做出科学的分析评价，可以适应喀斯特区公路建设的需要，并且供今后在喀斯特地区修建公路时参考和借鉴。     

金沙江流域(云南境内)山地灾害危险性评价

云南境内的金沙江流域是斜坡不稳定的敏感区,根据1988-2000年的区域调查和统计,区内发育山地灾害点1697处,其中流域面积大于1km2的泥石流沟808条,体积大于1×104m3的滑坡580处,体积大于1000m3的崩塌309处。用于山地灾害危险性评价的主要敏感因子包括岩土体类型、山坡坡度、降雨、土地利用、地震烈度和人类活动。在对这些因子进行了敏感性评价的基础上,应用GIS对敏感因子集成评价而产生了云南金沙江流域山地灾害危险性评价图。评价结果表明:高危险区面积占全区面积6464km2的8 77%,中危险区占全区总面积的41 51%,低危险区占41 12%,无危险区占8 60%。山地灾害危险性评价图可以帮助规划者或工程师在土地发展规划中选择最佳建设场所,以减轻灾害的影响。     

集成高度和彩色纹理特征的影像目标模糊聚类识别方法

提出一种基于高度和彩色纹理信息的目标识别方法 ,其目的是提取具有相对高度的地物。由于传统二维纹理分析的方法往往不能有效地提取这类目标 ,本文把高度、色彩和纹理信息有机地结合起来 ,提高了识别率。依据影像提取结果 ,探讨了树林对森林覆盖地区自动空中三角测量选点的负面影响 ,同时建议采用数据分组的方案来改善森林覆盖地区自动空中三角测量的精度 ,并用对比实验证明了其有效性。     

A knowledge base model for evaluation of bio-physical tendency of dryland

The present study aims the evaluation of bio-physical characteristics towards soil-water-vegetation stress and a rule is envisaged to assess the degree of temporal changes. The digital rule for assessment is initialized through the index of land Instability (ILI) where the variance indicates the temporal instability of the pixel i.e., smallest land unit. It is assumed that the biophysical characteristic of land is in command of land-dynamics where there is no change in Land Use/Land Cover (LU&LC). The intensity map on tendency of albedo (IALB) assesses the intensity of soil erosion and water stress whereas intensity map on tendency of NDVI (INDVI) appraises the stress on vegetation. The carry-out study covers a part of semiarid Western India. Primarily remote sensing technique, which carries the digital information of land temporally and spatially, is adopted in this paper. A part of the study area is represented using two sets of IRS 1A/1B LISS-I data of March with a decadal time domain (1989-1998) as a test area. It is assumed that the soil-water-vegetation stress is maximum during summer(March-April-May) in any tropical belt and decadal data will stretch the possibility of climate as well as man-made activity over the land.     

Regional comprehensive assessment on environment-health of China

The aim of the study was to assess the environment-health development in different regions of China. 175 indicators, such as average life expectancy at birth, emission intensity of waste gas, GDP etc. were chosen to describe various aspects of the environment, health and development of China. Of all the indicators, life expectancy can sufficiently reflect health situation of population. Consequently, life expectancy was identified as key indicator, and 42 out of 175 indicators were selected for establishing the environment-health indicator framework with three grades of integrative indices to assess the development of environment-health of China. Based on the hierarchical relation between various grades of indices, the comprehensive environment-health index was calculated and contributed to classify the environment-health situation of 30 provinces, municipalities and autonomous regions in China which were divided into five grades by four predefined limits. Comprehensive assessment indicates that the environment-health situation of the eastern and coastal areas is superior to that of inland which is the western regions with underdeveloped economy and rigorous natural condition. Especially, the Qinghai-Tibet and Yunnan-Guizhou plateaus in southwestern China are most vulnerable in the environment and population health. These fit in with the pattern of national socio-economic development, which fully shows that socio-economic context plays a dominant role in the improvement of environment-health in China.     

Representing and communicating deep uncertainty in climate-change assessments

IPCC reports provide a synthesis of the state of the science in order to inform the international policy process. This task is made difficult by the presence of deep uncertainty in the climate problem that results from long time scales and complexity. This paper focuses on how deep uncertainty can be effectively communicated. We argue that existing schemes do an inadequate job of communicating deep uncertainty and propose a simple approach that distinguishes between various levels of subjective understanding in a systematic manner. We illustrate our approach with two examples. To cite this article: M. Kandlikar et al., C. R. Geoscience 337 (2005).     

云南沿边境地带生态环境3S监测、 评价与调控研究

本文利用全球新千年整体生态系统评估的理论，以云南省沿边境地带生态系统变化跨境生态安全为研究对象，探寻并揭示我国陆疆系统的跨境生态系统变化监测、评价和生态安全综合调控的基础理论与信息机理；进而研究基于“3S”云南沿边境地带的生态环境监测、评价与综合调控的方法和关键技术，包括方法和技术体系的建立、指标体系的建立、多尺度效应和尺度转换、数学模型的建立、综合调控模式和决策方案的建立等；在案例研究部分，建立了背景数据库，然后选择大、中、小尺度进行了全区生态环境现状评价，重点河道、典型路段和重点口岸的影响评价和预测预报研究，最后进行了综合调控模式和方案的探讨，并对研究结果进行了动态仿真和虚拟表达研究。     

太湖表层沉积物多环芳烃的空间分布、来源及其风险

随着太湖流域社会与经济的发展,多环芳烃(PAHs)在各种环境介质中逐渐累积,污染日益严重,可能对太湖生态环境及周边人体健康构成威胁。为探究太湖沉积物PAHs的来源及生态风险,于2021年12月在太湖采集30个表层沉积物样品,利用气相色谱-质谱联用仪(GC-MS)检测样品中16种PAHs含量;利用受体模型和苯并[a]芘(BaP)毒性当量法进行来源解析及生态风险评估,并将各来源贡献与毒性当量浓度相结合,量化源风险。结果表明,太湖表层沉积物中16种PAHs总含量介于124~592 ng/g之间,平均值为294 ng/g,中值为279 ng/g;高环多环芳烃(HMW PAHs)为主要组分,占∑PAHs的67%。高含量区域位于竺山湾、梅梁湾、贡湖湾和西太湖,与国内外其他湖泊沉积物相比,太湖沉积物PAHs含量处于较低水平。源解析的结果表明,太湖表层沉积物中PAHs交通排放源贡献率为29.1%、煤炭燃烧源贡献率为26.7%、生物质燃烧源贡献率为28.7%、石油源贡献率为15.6%。生态风险评价结果表明,交通排放源、生物质燃烧源、煤炭燃烧源和石油源的BaP毒性当量含量(TEQ_BaP)均值分别为19.34、17.81、16.33和9.1 ng/g,均小于70 ng/g,几乎处于无风险水平。西太湖、贡湖湾和梅梁湾的部分区域ΣTEQ_BaP大于70 ng/g属于潜在风险区,具有一定潜在毒性。在后续的污染治理中应重点关注太湖西北部地区污染物的排放。本研究可为沉积物中PAHs污染的研究提供数据支撑,为地方政府精准、高效地管控PAHs污染提供理论依据。     

基于模糊物元模型的中国旅游生态安全评价及障碍因子诊断研究

基于DPSIR模型构建旅游生态安全评价指标体系,利用模糊物元模型对中国31个省(市、区)(不含港澳台)旅游生态安全进行动态评价,并运用空间自相关分析空间格局演化特征.同时借助障碍度模型,对旅游生态安全的障碍因子进行诊断.结果表明:①旅游生态安全呈现出波动增长的"W"型演化趋势.2013-2016年中国旅游生态安全在空间...     

基于交互多模型的水下目标跟踪方法

According to the requirements of real-time performance and reliability in underwater maneuvering target tracking as well as clarifying motion features of the underwater target, an interacting multiple model algorithm based on fuzzy logic inference （FIMM） is proposed. Maneuvering patterns of the target are represented by model sets, including the constant velocity model （CA）, the Singer mode~, and the nearly constant speed horizontal-turn model （HT） in FIMM technology. The simulation results show that compared to conventional IMM, the reliability and real-time performance of underwater target tracking can be improved by FIMM algorithm.