Kinematic source model for simulation of near-fault ground motion field using explicit finite element method

1 Introduction The prediction of broadband near-fault ground motion is an important aspect of seismic risk analysis, and is essential for the evaluation of urban seismic safety. Many methodologies are used to model the near-fault ground motions, such as the Green function method, ?nite element (FE) / ?nite difference (FD) method and a hybrid method (Aagaard, 1999; Oprsal and Zahradnik, 2002; Oprsal et al., 2003 a and b). In the hybrid method, the FE / FD method is used to model the low fr…     

探测未爆炸弹的地球物理技术综述

采用综合地球物理勘查技术探测未爆炸弹(UXO)具有快速、定位准确和成本低廉的优势.综述了国内外广泛应用的地面高精度磁测法、电磁法以及地质雷达和微重力法在探测UXO中的特点和效果,介绍了国外航空磁测法及航空电磁法探测UXO的进展,并根据某些探测实例阐述了在具体实施过程中应注意的技术问题;提出了适合中国UXO探测的一些措施和建议.     

印度-澳大利亚板块应力场数值模拟及其动力学分析

印度-澳大利亚板块的边界类型和性质十分复杂。本文采用伪三维有限元方法,利用WSM2000观测应力场数据的应力取向和应力状态作为主要约束,建立了印度-澳大利亚板块岩石层三维模型,对印度-澳大利亚板块构造应力场进行了数值模拟,进而探讨印度-澳大利亚板块所受边界力对板块内部应力场的影响。结果显示,印度-澳大利亚板块的构造应力场主要受到两个因素的控制:①软流层静压推力;②来自碰撞带的阻力,包括喜马拉雅、巴布亚新几内亚、新西兰和印度-澳大利亚板块与欧亚板块的西北边界。而来自俯冲消减带的拉张作用力对板内应力场的作用相对较小。      

Adsorption of Pentachlorophenol onto Oxide and Clay Minerals： Surface Reaction Model and Environmental Implications

The adsorption of pentachlorophenol （PCP） onto quartz, kaolinite, illite, montmorillonite and iron oxides has been investigated by batch equilibrium techniques. The pH-dependent isotherms are curves with peak values, the position of which is at about pH = 5-6 depending on the mineral species. Based on distribution of both speciation of surface hydroxyls on minerals and PCP in solution a surface reaction model involving surface complexation and surface electrostatic attraction is presented to fit the pH-dependent isotherms, and both reaction constants are calculated. The results show that on quartz and phyllosilicate minerals the predominant adsorption reaction is surface complexation, meanwhile both of surface electrostatic attraction and surface complexation are involved on the iron oxide minerals. The reaction constants of surface electrostatic adsorption are usually one to three orders in magnitude, larger than that of surface complexation. The concentration-dependent isotherms can be well fitted by Langmnir equation with the correlation coefficient R〉0.93 for kaolinite and iron oxides. The maximum adsorption is found in the order： hematite 〉 lepidocrocite 〉 goethite 〉 kaolinite 〉 quartz 〉 montmorillonite ≈ illite, which can be interpreted by consideration of both reaction mechanism and surface hydroxyl density. The significant adsorption of PCP onto mineral surfaces suggests that clay and iron oxide minerals will play an important role as HIOCs are adsorbed in laterite or latertoid soil, which is widespread in South China.     

Absorption of Arsenite on Several Iron （Hydro-）Oxides and Impact from Pre-processing Methods

The absorption reactions of arsenite on Fe （hydro-）oxides are studied. The three absorbent types are Fe（OH）3 gel and two Fe （hydro-）oxides, in which the Fe（OH）3 gel was dried in a microwave oven under vacuum at 80℃. It is found that pH changes from 9.71 to 10.36 in 6 minutes after the Fe （OH）3 gel was mixed with NaAsO2 solution, as the arsenite replaces the OH- in goethite and Fe（OH）3. At the 40th minute after the start of the reaction, pH decreases, which is most probably because that the monodentate surface complex of absorbed arsenite has changed into mononuclear-bidentate complex and released proton. The decline in pH values indicates not the end of the absorption but a change in the reaction type. Temperature and dissolved gas has little effect on these two types of reactions. The total absorption of arsenite increases after the absorbent is irradiated with ultrasound, which also lead to difficulty in separating the solids from solution. The absorption capacity for arsenite of Fe（OH）3 gel dried in a microwave oven under vacuum is 53.18% and 17.22% respectively better than that of Fe （OH）3 gel and gel dried at 80℃. The possible reasons are that the water molecules in the gel vibrates with high frequency under the effect of microwave irradiation, thereby producing higher porosity and improved surface activity.     

基于小波变换的射频干扰消除方法的研究

在射电天文观测中,射频干扰(Radio Frequency Interference, RFI)会以多种形式混入望远镜接收系统,给观测带来误判或者降低观测信噪比.近年来国内国际射电天文快速发展,国内国际大型射电望远镜和阵列先后建设,观测灵敏度大为提高,射频干扰的影响尤为突出.随着科技发展和人类活动的加剧,射频干扰日益严重且不可逆转.提出利用2维离散小波变换的方法分析射电天文观测的数据,对望远镜系统输出的时间频率序列进行小波变换,根据小波系数分离出原始信号中各分量,每个分量统计得到相应的阈值,将各分量与阈值相比较识别干扰成分并标记去除.利用该方法对实际观测数据进行了处理,结果表明该方法能够很好地标记并消减干扰信号,且提高了观测的信噪比.     

安宁河-则木河断裂带地震视应力研究

利用四川和云南数字遥测地震台网的数字地震记录资料。研究了包括地震视应力在内的震源参数。首先对资料进行预处理,然后计算地动位移和速度的功率谱积分,再计算地震辐射能量和视应力等震源参数。根据计算结果分震级区间研究了视应力值沿安宁河-则木河断裂带的分布情况,及该断裂带上中等地震的震源谱及参数差异,认为安宁河断裂带视应力相对更高。     

二维复杂介质中地震波走时和射线的计算方法及其应用

将Podvin和Lecomte的精确局部格点走时计算方法和Schneider等人的动态规划方法结合起来,可得到一种快速、有效的有限差分波前计算方法。使用该方法对各种类型地震波的走时和射线的计算进行了讨论,并给出了这种有限差分走时计算在叠前深度偏移中的应用实例。     

华清4#泉水溶气体百分含量合计的强震远场前兆特征

华清4#泉水溶气体百分含量合计(QB)的取值范围为100±5.按4舍5入法取整数值,将其分为11个区段.以年为单位,统计QB落在每个区段内的频次.频率分布直方图显示,在QB取值区间内,分区段频率呈近似正态分布.将落入QB频率最高的区段称为轴,将轴在不同区段上位置的变化称为轴漂.研究表明,QB在不同区段上轴的漂移,反映了区域应力场的不同状态.轴落入99区段上,反映的是区域应力场的增强,与远场M≥7.0地震及伴生中强地震、鄂尔多斯块体周边后继中强地震有很好的相关性;轴落入98区段上,反映的是区域应力场的相对稳定;轴落入97区段上,反映的是巨大地震后,区域应力场的调整及中强地震活动格局的变化.文中还阐述了99区段轴值与地震对应关系的几个特征.     

基于GM(1,1)模型的塔里木盆地南缘孤立绿洲降水灾变预测

我们选取了具有一定代表性的塔里木盆地南缘的孤立绿洲民丰县作为研究区,在对数据有效性的验证之后,利用研究区1980~1999年的降水资料,运用灰色系统理论的季节灾变预测方法,对该地区未来年份的降水量进行预测,并建立灰色季节灾变GM(1,1)预测模型,预测未来旱季到来的年份,为预测未来降水趋势提供了信息。结果表明:该研究区下一个旱灾灾变年大致指向2006年至2007年左右。这对合理利用本地气候资源具有实际意义,并且能够为研究干旱区气候变化提供一定的帮助。