四川省康定县滑坡灾害发育特征与形成条件

康定县地处四川盆地西缘山地及青藏高原过渡地带。县域内地势险峻,地形切割强烈,地层与地质构造复杂,新构造运动强烈,地震活动频繁。加之降水充沛,致使山地灾害十分发育,其中滑坡灾害占山地灾害的38.32%。通过搜集资料及现场调查,概述了该县县域内滑坡灾害的分布;从行政区划、自然地理及灾害规模等3方面统计分析了滑坡灾害的发育现状;从地形地貌、地层岩性、地质构造、降雨、地震活动、人类工程活动等方面总结了滑坡灾害的形成条件,并提出防治对策与措施,力求有效地预防与减少滑坡灾害的发生。     

数据备份服务器备份性能分析

针对数据备份服务器备份性能优化问题，分别对实时数据存储与历史数据备份之间的关系、数据备份服务器所备份的数据类型非唯一性、客户数量对备份服务器备份效率的影响三方面进行初步的测试与分析，提出了通过优化数据块的选取、优化数据采集方式、优化备份策略提高备份服务器备份效率的基本方法。     

三峡库区滑坡治理工程设计中推力荷载计算方法初探

随着三峡水利工程的逐步实施，淹没区移民及新城镇建设等人类工程活动的加剧，以滑坡为主的环境地质问题日益突出。本文从稳定系数、安全系数入手，对铁道、公路等部门常用的设计计算原理进行了研究，并由此类比分析研究了三峡区回水后或库水位正常运行条件下，滑坡治理工程设计计算方法。     

Ground‐shaking mapping for a scenario earthquake considering effects of geological conditions: a case study for the 1995 Hyogo‐ken Nanbu,Japan earthquake

In order to examine the applicability of ground‐shaking mapping techniques to a near‐field earthquake, a peak ground velocity map of the 1995 Hyogo‐ken Nanbu, Japan earthquake computed from seismic zoning methods that consider the effects of geological conditions is compared with the actual observed intensity map. When computing the ground‐shaking map, the site amplification at each site is calculated in terms of the average shear‐wave velocity of the ground estimated from the corresponding geomorphological conditions. This map shows a relatively good agreement with the observed intensity map. However, the computations provide smaller values for certain disastrous areas of the earthquake, where the effects on ground motion of a deep, irregular underground structure have been reported. The effect of such structures on site response is examined implementing 2D FEM analyses, thereby being also incorporated into the method. Results considering the effect of the irregular underground structure show better agreement with the observed intensity map. Copyright © 2002 John Wiley & Sons, Ltd.     

攀西地区独立银矿的成矿地质条件及找矿前景

四川攀西地区具有特定的地质条件，区域地球化学特征、有利的成矿环境和已发现的银矿床点，都证明区内具有很好的成矿地质条件，寻找大型独立银矿很有前景。主攻内生型和沉积变质型银矿床是今后工作的重点。     

Combination of Dependent Realizations Within the Gradual Deformation Method

Gradual deformation is a parameterization method that reduces considerably the unknown parameter space of stochastic models. This method can be used in an iterative optimization procedure for constraining stochastic simulations to data that are complex, nonanalytical functions of the simulated variables. This method is based on the fact that linear combinations of multi-Gaussian random functions remain multi-Gaussian random functions. During the past few years, we developed the gradual deformation method by combining independent realizations. This paper investigates another alternative: the combination of dependent realizations. One of our motivations for combining dependent realizations was to improve the numerical stability of the gradual deformation method. Because of limitations both in the size of simulation grids and in the precision of simulation algorithms, numerical realizations of a stochastic model are never perfectly independent. It was shown that the accumulation of very small dependence between realizations might result in significant structural drift from the initial stochastic model. From the combination of random functions whose covariance and cross-covariance are proportional to each other, we derived a new formulation of the gradual deformation method that can explicitly take into account the numerical dependence between realizations. This new formulation allows us to reduce the structural deterioration during the iterative optimization. The problem of combining dependent realizations also arises when deforming conditional realizations of a stochastic model. As opposed to the combination of independent realizations, combining conditional realizations avoids the additional conditioning step during the optimization process. However, this procedure is limited to global deformations with fixed structural parameters.     

Melting of β-quartz up to 2.0 GPa and thermodynamic optimization of the silica liquidus up to 6.0 GPa

Melting relations of β-quartz were experimentally determined at 1.0 GPa (1900±20 °C), 1.5 GPa (2033±20 °C), and 2.0 GPa (2145±20 °C) using a new high-pressure assembly in a piston–cylinder apparatus and substantial differences were found with data previously reported. The new melting data of β-quartz were combined and optimized with all available thermodynamic, volumetric, and phase equilibria data for β-cristobalite, β-quartz and coesite to produce a P–T liquidus diagram for silica valid up to 6.0 GPa. Using the new optimized thermodynamic parameters, the invariant point β-cristobalite+β-quartz+liquid and β-quartz+coesite+liquid were determined to lie at 1687±17 °C and 0.457 GPa, and 2425±25 °C and 5.00 GPa, respectively.     

Improved treatments for evaluating horizontal magnetic components through the 3-D FDM in E -polarization induction problems

To improve the accuracy of the numerical evaluation through the 3-D finite difference method, the surface boundary conditions are added to modify the old program. The author has tested the new program by making calculations for the model constructed by Wanamaker, et al (1984). The comparison between the numerical results obtained from this paper and those by Wannamaker, et al (1984) indicates that a pronounced improvement is realized in the evaluation of the horizontal magnetic components. Moreover, better calculations for the vertical magnetic components are also obtainable by using the new program.     

海洋平台结构振动的AMD主动控制参数优化分析

本文针对海洋平台结构的冰激振动和地震反应控制问题，提出了采用AMD主动控制的控制策略，结合JZ20－2MUQ平台结构进行了AMD控制系统的硬参数和软参数的优化分析，并就相应于最优参数下的AMD控制海洋平台结构冰激振动和地震反应的几种代表性工况进行了时程分析，得到了一些定性和定量的结论，为实际工程的控制设计提供了基础。本文提出的AMD主动控制方法对类似的海洋平台结构的控制问题也有参考价值。