基于GIS的机场噪声预测管理系统

针对我国机场噪声预测工作中存在的问题,根据地理信息系统的固有优势,采用面向对象的编程技术,开发建立基于GIS的机场噪声预测管理系统。按照自下而上的设计思路,将系统分为数据层、业务层和用户层三级结构,并且构建模块化操作,将系统分为GIS操作、噪声预测和信息管理三个模块,通过方便快捷的界面操作,实现了机场噪声预测和影响范围的查询和分析。实验结果表明,该系统能有效提高机场噪声预测和管理工作的效率和质量,为机场规划和航班制定提供及时、准确的决策参考。     

基于方差递推法的Kalman滤波在钟差预报中的应用

卫星导航系统中星载原子钟的钟差预报对于导航、定位及授时具有重要的作用。为了提高卫星钟差预报的精度,设计了一种两步确定卫星钟噪声协方差矩阵的Kalman滤波钟差预报模型。该方法首先基于Hadamard总方差确定卫星钟噪声协方差矩阵的初值,然后,使用方差递推法得到滤波过程中卫星钟的噪声协方差矩阵。使用GPS系统的星载铷钟数据进行短期预报,并与常用的二次多项式模型、灰色模型进行对比,结果表明:本文中提出的方法可以实现高精度的卫星钟差预报且预报效果优于两种常用模型,同时,该方法能够在一定程度上弥补预报误差随预报时间增加而不断变大的不足。     

SAR图像海岸线检测的区域距离正则化几何主动轮廓模型

合成孔径雷达(SAR)卫星遥感图像可以极大地提高全国海岸线覆盖频率,然而受到海洋波浪所引起的随机海水表面粗糙度的影响,海岸目标与海水背景边界易混淆不清,因此本文提出了基于区域距离正则化几何主动轮廓模型(RDRGAC),引入距离正则项,解决重复初始化水平集函数为符号距离函数的问题,提高了算法收敛速度。此外,将区域面积项系数与SAR图像等效视数(ENL)建立非线性拟合关系,实现RDRGAC模型根据不同SAR遥感图像的自适应调整,改善海岸线自动提取精度。通过河北省北戴河和大连市金州湾SAR数据海岸线提取对比试验,验证了所提方法的有效性。     

Field Evaluation of the Vertical Bearing Capacity of a Screw Pretensioned Spun High-Strength Concrete Pile

This study has evaluated the vertical bearing capacity by conducting static load tests for noise-free and vibration-free screw pretensioned spun high-strength concrete (PHC) piles installed using two different methods (end-squirting shoe and pre-boring methods). Vertical bearing capacity differences seem to occur due to the displacement of soils near the external circumference of a pile, depending on the installation method. A method by which to evaluate the bearing capacity of screw concrete piles is suggested by considering the equations that already have been used to calculate the bearing capacity of piles. Based on static load tests and analysis, the pile installed using the end-squirting shoe method was assumed to be a bored pile and it was reasonable to use the equation proposed by the Japanese Geotechnical Society. At the same time, the pile installed using the pre-boring method was deemed a low soil displacement pile and so it was reasonable to apply the equations proposed for calculating the bearing capacity of the driven pile suggested by the Architectural Institute of Japan.     

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.     

云南区域数字地震台网的监测能力与限幅问题

采用地噪声包络幅度作为背景噪声的统计特征量,利用噪声峰值角频率处的地噪声速度振幅与对应的地噪声位移振幅Aμn的转换关系,把Av换算成近震震级公式中所需的位移量Aμ,在此基础上,计算了云南数字地震台网的监测能力,计算结果与实际观测结果相符.同时,分析了云南"九五"地震监测台网的大震限幅问题.     

GNSS变形监测网短基线时间序列噪声特性分析

利用时间跨度为5 a的GNSS短基线时间序列对噪声特性进行分析,发现长周期噪声分量(随机游走噪声)。选取最优噪声模型,评估不同噪声模型对测站周期振幅和线性速度估值的影响。结果表明,短基线时间序列中有色噪声应顾及闪烁噪声和随机游走噪声,对于表现出随机游走噪声的分量,可能与测站的真实运动有关;假设只有白噪声时求得的速度估值与最优噪声模型下求得的速度估值存在0.4～0.6 mm/a的偏差,对周期振幅的影响可以忽略。     

Experimental Study of a Command Governor Adaptive Depth Controller for an Unmanned Underwater Vehicle

Unmanned Underwater Vehicles (UUVs) are increasingly being used in advanced applications that require them to operate in tandem with human divers and around underwater infrastructure and other vehicles. These applications require precise control of the UUVs which is challenging due to the non-linear and time varying nature of the hydrodynamic forces, presence of external disturbances, uncertainties and unexpected changes that can occur within the UUV’s operating environment. Adaptive control has been identified as a promising solution to achieve desired control within such dynamic environments. Nevertheless, adaptive control in its basic form, such as Model Reference Adaptive Control (MRAC) has a trade-off between the adaptation rate and transient performance. Even though, higher adaptation rates produce better performance they can lead to instabilities and actuator fatigue due to high frequency oscillations in the control signal. Command Governor Adaptive Control (CGAC) is a possible solution to achieve better transient performance at low adaptation rates. In this study CGAC has been experimentally validated for depth control of a UUV, which is a unique challenge due to the unavailability of full state measurement and a greater thrust requirement. These in turn leads to additional noise from state estimation, time-delays from input noise filters, higher energy expenditure and susceptibility to saturation. Experimental results show that CGAC is more robust against noise and time-delays and has lower energy expenditure and thruster saturation. In addition, CGAC offers better tracking, disturbance rejection and tolerance to partial thruster failure compared to the MRAC.     

基于分数阶和二阶总广义变分的乘性去噪模型

针对总变分(TV)模型在去噪时会产生阶梯效应、纹理细节信息丢失的问题,提出一种新的乘性噪声去除模型。该模型采用分数阶变分(FV)和二阶总广义变分(TGV)的正则项。FV的正则项在去噪时可保留图像的纹理信息,TGV的正则项在去噪时可改善阶梯效应。为有效求解该模型,先采用分裂法和交替方向法将原问题转化为两个相关的子问题,再利用原始对偶和梯度下降算法分别对子问题进行求解。对仿真图像进行实验的结果表明,新模型不仅可以提高图像的信噪比,而且可以更好地保留图像的边缘和纹理细节信息,改善阶梯效应。     

2～18 GHz超宽带低噪声放大器芯片研制

低噪声放大器在射电天文望远镜接收机中是一个重要的前端组件,其性能对接收机的灵敏度和噪声有至关重要的影响。采用OMMIC公司70 nm GaAs mHEMT工艺研究和设计了一款工作频率为2~18 GHz的超宽带单片微波集成低噪声放大器芯片,芯片面积为2 mm×1 mm。放大器电路采用三级级联放大、双电源供电拓扑结构,常温在片测试结果显示,全频带增益大于28 dB,噪声温度平均值为93 K,直流功耗150 mW,无条件稳定。该放大器芯片覆盖了射电天文S,C,X,Ku 4个传统观测波段,适用于厘米波段超宽带接收前端和毫米波段超宽带中频放大模块。