冰层取心回转钻进模拟实验台的设计与测试

极地钻探实践表明,冰盖底部冰岩交界附近地质情况异常复杂,不但可能存在暖冰、基底融水,甚至还存在厚度不等的冰岩夹层,取心钻探异常困难,而优选钻头类型、确定合理的钻进参数是保证其安全、快速钻进的重要因素。本文设计了一套能够模拟冰层回转钻进的实验台,其技术参数为：钻压、转速分别可在0～10 kN、0～300 r/min范围内调节,最大扭矩约100 N·m。该实验台能够测量钻头切削具温度、钻孔深度及钻进速度等参数,为深入研究钻头类型及结构参数、钻进参数对扭矩、钻速和切削温度的影响规律提供了手段。采用PDC复合片钻头进行了冰钻实验,结果表明,实验台能够准确调节钻压和转速,可满足实验要求。     

An experimental investigation into the influence of the damage openings on ship response

Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations.     

Prediction of Seaward Slope Recession in Berm Breakwaters Using M5' Machine Learning Approach

In the design process of berm breakwaters, their front slope recession has an inevitable rule in large number of model tests, and this parameter being studied. This research draws its data from Moghim’s and Shekari’s experiment results. These experiments consist of two different 2D model tests in two wave flumes, in which the berm recession to different sea state and structural parameters have been studied. Irregular waves with a JONSWAP spectrum were used in both test series. A total of 412 test results were used to cover the impact of sea state conditions such as wave height, wave period, storm duration and water depth at the toe of the structure, and structural parameters such as berm elevation from still water level, berm width and stone diameter on berm recession parameters. In this paper, a new set of equations for berm recession is derived using the M5'' model tree as a machine learning approach. A comparison is made between the estimations by the new formula and the formulae recently given by other researchers to show the preference of new M5'' approach.     

岸滩侧蚀崩塌速率的试验量测方法

岸滩侧蚀崩塌现象普遍存在于冲积河流演变过程中,是河道治理需重点关注的问题之一,岸滩侧蚀崩塌速率的准确量测则是崩岸机理及其治理措施研究的关键基础。基于图像处理技术,建立了河岸侧蚀崩塌速率试验量测系统,通过图像追踪河岸模型上边缘示踪网格位置变迁,提出了一种河岸侧蚀崩塌速率测量方法。以试验水槽为例,对河岸侧蚀崩塌速率进行了量测,并与经验公式计算值进行了比对,两者基本吻合,可较好地反映流速、土体级配等岸滩侧蚀崩塌速率的影响因素及其变化规律。研究成果可为江河崩岸机理的深入研究提供技术支撑。     

水平地震作用下无锚固储罐应力与应变响应分析

在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的应力及应变反应进行了数值计算。对3×104m3和2×103m3罐壁应力及应变的分析结果表明:环向、轴向应力及应变的分布形式呈现出明显的下部大上部小的特点,在偏底部的位置出现应力和应变的峰值;储液罐在水平地震作用下“象足”变形是由纵向压应力达到屈曲临界应力导致的屈曲破坏,不是强度破坏,即破坏属于失稳破坏而非强度破坏。     

锚定式方钢管混凝土柱与钢梁节点抗震性能试验研究

通过低周反复加载试验对6个锚定式方钢管混凝土柱-H形钢梁节点进行了试验研究,研究了不同轴压比情况下节点的破坏模式、延性、耗能性能、强度及刚度退化等。试验结果表明,破坏之前节点具有良好的滞回性能、延性及耗能能力,满足现行抗震规范的要求。锚定式方钢管混凝土梁柱节点可以用于拉力较小的节点。文中提出了有关的设计建议。     

地震工程研究的科学大平台

始于十九世纪末的地震工程研究,在其100多年的历史中积累了大量的理论和实践经验,随之而建设起来的各类地震工程实验设施分布于世界各地。近20年来,信息技术的飞速发展使得分布于世界各地的实验设施通过网络实现协同实验和资源共享。基于以上的信息,为了更好更快地和国际接轨,本文提出了建设一个地震工程研究领域的科学大平台设想。这个大平台包括三个方面的内容:数值模拟,网络协同实验系统和基础信息系统,将形成本领域开放性的综合科学平台。在数值模拟方面,这个科学平台将利用最新的信息技术将本领域的科学研究结果和方法集成起来,形成一个模块式的科学研究平台系统。在网络协同实验方面,将采纳美国NEES的思路,并对其改进和提高之后应用于中国。在基础数据方面,将利用最为先进的数据仓储技术,建设一个可以服务于地震工程科学研究的数据平台。最后,文章给出了建设这个科学平台的规划,以及目前的进展和资金支持等情况。     

水平地震激励下储罐液体晃动与提离分析

在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的液面晃动及储罐提离反应进行了分析。结果表明:罐内液体的晃动是长周期运动,其周期受地震动影响。无论是小体积罐还是大体积罐,在一定的地震烈度下均可以发生提离,而且储罐发生提离的时刻大多数是在地震动的峰值过后的一段时间内。大体积的储罐的提离明显小于小体积的罐。底板提离区域为月牙形。     

Sailboat propeller drag

All but the smallest classes of modern keelboats are fitted with inboard engines and consequently, when making way under sail, the craft experience parasitic drag due to trailing propellers and associated appendages. The variety of screw configurations used on sailing boats includes fixed-blade, feathering, and folding set-ups, with blades numbering two or three. Although the magnitude of the resultant drag is thought to have a significant influence on sailing performance, the published literature having regard to this problem is sparse. Here, the aim was to evaluate the drag effect of fixed-blade propellers of types commonly used on sailing craft. The results of towing tank tests on full-scale propellers are presented for the locked shaft condition; these are presented along with reconfigured data from the few previously published sources. For the case in which the propeller is allowed to rotate, tests were conducted on a typical screw with a range of braking torques being applied. It was hypothesised that the performance coefficients of the Wageningen B-Screw Series could be used to characterise adequately the types of screw of interest and that these could be extrapolated to enable prediction of the drag of a freewheeling propeller; an assessment of this formed part of the investigation.     

极限波浪运动特性的非线性数值模拟

利用时域高阶边界元方法建立了模拟极限波浪运动的完全非线性数值模型,其中自由水面满足完全非线性自由水面条件.采用半混合欧拉-拉格朗日方法追踪流体瞬时水面,运用四阶Runge-Kutta方法更新下一时间步的波面和速度势,同时应用镜像格林函数消除水槽两个侧面和底面上的积分.研究中利用波浪聚焦的方法产生极限波浪,并且在水槽中开展了物理模型实验,将测点试验数据与数值结果进行了对比,两者吻合得很好.对极限波浪运动的非线性和流域内速度分布进行了研究.