绿片岩三轴流变力学特性的研究(Ⅰ):试验结果

为了解锦屏一级水电站坝基绿片岩的流变力学特性，采用岩石全自动流变伺服仪对绿片岩进行了三轴压缩流变试验。基于试验结果，研究了绿片岩在不同围压作用下的轴向应变以及侧向应变随时间的变化规律，讨论了流变特性对岩石应力一应变曲线的影响，探讨了不同应力水平下的轴向以及侧向流变速率变化趋势，分析了不同围压下流变的破裂机制，掌握了绿片岩三轴流变的基本规律，从而为该水电站工程流变数值分析时参数的辨识提供了可靠的依据。     

马岭油田北三区污水回注的实验研究

根据马岭油田北三区油田水性质，结合污水与地层水混合的静态实验结果分析，发现污水回注对地层可能引起不同程度的伤害。同时，模拟地层条件做岩心流动实验。将采出的污水回注到地层与地层水混合后，亦会使地层渗透率下降，且随着污水含量的增加，渗透率伤害程度增大。     

近20年来中国旧石器考古学的进展与思考

本文记述近20年来中国旧石器考古学研究的主要成果,着重论述早期人类扩散的速度和中国旧石器工业的基本框架:北、南方各存在一个主工业,并存若干区域工业;同时对试验考古研究以及东西文化比较研究等的现状和问题提出孔见。     

An experimental study of grain scale melt segregation mechanisms in two common crustal rock types

Creation of pathways for melt to migrate from its source is the necessary first step for transport of magma to the upper crust. To test the role of different dehydration‐melting reactions in the development of permeability during partial melting and deformation in the crust, we experimentally deformed two common crustal rock types. A muscovite‐biotite metapelite and a biotite gneiss were deformed at conditions below, at and above their fluid‐absent solidus. For the metapelite, temperatures ranged between 650 and 800 °C at P_c=700 MPa to investigate the muscovite‐dehydration melting reaction. For the biotite gneiss, temperatures ranged between 850 and 950 °C at P_c=1000 MPa to explore biotite dehydration‐melting under lower crustal conditions. Deformation for both sets of experiments was performed at the same strain rate (ε.) 1.37×10^?5 s^?1. In the presence of deformation, the positive ΔV and associated high dilational strain of the muscovite dehydration‐melting reaction produces an increase in melt pore pressure with partial melting of the metapelite. In contrast, the biotite dehydration‐melting reaction is not associated with a large dilational strain and during deformation and partial melting of the biotite gneiss melt pore pressure builds more gradually. Due to the different rates in pore pressure increase, melt‐enhanced deformation microstructures reflect the different dehydration melting reactions themselves. Permeability development in the two rocks differs because grain boundaries control melt distribution to a greater extent in the gneiss. Muscovite‐dehydration melting may develop melt pathways at low melt fractions due to a larger volume of melt, in comparison with biotite‐dehydration melting, generated at the solidus. This may be a viable physical mechanism in which rapid melt segregation from a metapelitic source rock can occur. Alternatively, the results from the gneiss experiments suggest continual draining of biotite‐derived magma from the lower crust with melt migration paths controlled by structural anisotropies in the protolith.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.     

水对断层摩擦滑动稳定性的影响

在不同含水条件下研究了光面、含脆性物质夹层和含延性物质夹层 3类断层的摩擦滑动行为 ,认为水对断层滑动稳定性和摩擦滑动的速度依赖性有重要影响。建立了含有岩性、围压 (深度 )和含水量 3因素的断层活动稳定性的模式 ,认为脆性断层更多地表现为速度弱化 ,少量水的存在易于出现黏滑 ,高孔隙压时会表现为稳滑 ;半脆性或半延性的断层在少量水或较低孔隙压的情况下会表现出速度弱化 ,也就可能出现黏滑 ,但孔隙压较高后 ,会表现出速度强化 ,滑动也就会是稳定的 ;延性断层多为速度强化 ,不出现黏滑。提出水的进入降低了系统的稳定性 ,水的存在增加了系统的稳定性。这是考虑水或一般流体对岩体或断层活动稳定性影响时需要考虑的两个方面     

天然气水合物研究现状与展望

自20世纪90年代以来,世界各国对潜力巨大的新型能源———天然气水合物的研究做了大量的投入,已经取得了重大进展。本文在阐述国外天然气水合物的研究现状的同时,重点介绍了我国在天然气水合物勘探开发和实验模拟方面取得的一些进展,并展望其在能源、环境和其它研究领域的发展前景。     

流动环境中二维铅垂纯射流的试验研究

对均匀流动环境中的铅直二维射流进行了试验研究,得到了流动转变的条件.采用超声多普勒流速仪(ADV)对射流流场进行了测量,得到了流速矢量图和流线图,发现在射流的迎流面存在流线跌落现象.探讨了流速比对射流背流面涡心和分离点位置的影响.给出低流速比为8的射流流场的实测结果,以供数值模拟对比使用.     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.