对提高导航型GPS定位精度之工作方法的探讨

论文主要介绍了导航型GPS坐标转换参数的计算方法和测量误差的改正方法。该方法的要点是通过实测多个公共点来计算坐标转换参数,以此获得较好的转换精度;并进一步对观测结果加以误差改正,从而提高其定位精度。     

基于BP神经网络的地图数字化误差纠正

由于在数字化采集过程中不可避免地会引入系统误差和异常误差,因此消除和削弱这些误差的影响是提高空间数据质量的关键。然而由于图纸变形不均匀,扫描误差又极其复杂,用常规的多项式拟合技术只能消除部分有规律的系统误差,很难完全消除它们对地图数字化坐标的影响。BP神经网络是一个高度非线性映射系统,能以任意精度逼近。结合地图数字化坐标改正的特点,本文给出了基于BP神经网络地图数字化坐标误差纠正的方法,并通过实例验证了该方法的有效性。     

基于小波变换与滤波的DEM简化方法

针对现有3维地形模型简化方法中的不足,提出了一种基于小波变换与滤波的规则格网简化方法。同时还在大量实验的基础上,给出了一般情况下需要的变换层数,分析了滤波门限与简化效果之间的关系。这里的研究不仅为3维地形的多分辨率合理建模与精度评估提供了理论和方法,而且也为今后开展类似研究及进行建模质量控制提供了科学的依据。     

地图误差对地图匹配质量的影响

高精度的数字地图是正确匹配车辆位置的基础。详细分析了地图数据的地理误差和拓扑误差的误差形式,路网数据模型的常见误差因素和改进策略,最后介绍了不同地图匹配算法对地图质量的敏感性和可行性。根据可能出现的误差对现有数字地图和匹配算法加以改进,弥补了原有数字地图带来的不精确缺陷。跑车实验证明,考虑了数字地图误差影响的匹配算法可以明显提高定位精度,减小车辆定位误差。     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

Modelling Positional Uncertainty of Line Features by Accounting for Stochastic Deviations from Straight Line Segments

The assessment of positional uncertainty in line and area features is often based on uncertainty in the coordinates of their elementary vertices which are assumed to be connected by straight lines. Such an approach disregards uncertainty caused by sampling and approximation of a curvilinear feature by a sequence of straight line segments. In this article, a method is proposed that also allows for the latter type of uncertainty by modelling random rectangular deviations from the conventional straight line segments. Using the model on a dense network of sub‐vertices, the contribution of uncertainty due to approximation is emphasised; the sampling effect can be assessed by applying it on a small set of randomly inserted sub‐vertices. A case study demonstrates a feasible way of parameterisation based on assumptions of joint normal distributions for positional errors of the vertices and the rectangular deviations and a uniform distribution of missed sub‐vertices along line segments. Depending on the magnitudes of the different sources of uncertainty, not accounting for potential deviations from straight line segments may drastically underestimate the positional uncertainty of line features.     

GPS伪卫星的组合定位技术及其误差分析

介绍了GPS伪卫星组合定位的观测模型,详细论述了GPS伪卫星组合定位中存在的误差源,并对各误差源的消除方法进行了分析。     

浅谈工程测量学的发展

对工程测量学的地位和应用领域,通用和专用仪器的发展,在理论和实践上进行了归纳和总结。简要地叙述了工程测量在国内外的发展情况及其发展趋势。     

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.     

中国数字地质调查系统的基本构架 及其核心技术的实现

数字地质调查系统是贯穿整个地质矿产资源调查全过程的软件,涵盖地质矿产调查、矿产资源勘查、矿体模拟、品住估计、资源量估算、矿山开采系统优化等内容。考虑数字地质调查系统的应用技术层面,从数据“层”模型、数据流“池”技术、不同阶段数据模型继承技术、数据互操作技术等几个方面讨论了核心技术及其实现,通过基于无缝一体化技术的数据采集、管理、综合处理与成果表达,在实体或矿块的矿床建模技术与品住估计、储量估算等方面展现了全地质调查过程的数字化,不但为地质人员应用高新技术降低了门坎,而且极大地提高了研究精度和效率,丰富了成果的表现形式和服务形式。随着数字地质调查系统的完善和应用水平的提高,数字地质调查系统将成为中国地质调查的主流软件体系。