GPS伪卫星的组合定位技术及其误差分析

介绍了GPS伪卫星组合定位的观测模型,详细论述了GPS伪卫星组合定位中存在的误差源,并对各误差源的消除方法进行了分析。     

GPS网中已知点粗差探测时限差的研究

在利用附合导线法对GPS网中已知点的可靠性进行检核时,本文对如何合理地、客观地确定限差,以达到有效检核的目的进行了探讨,提出了检核限差标准。并结合实例进行计算和分析,成功地剔除了含有粗差的已知点。     

浅谈工程测量学的发展

对工程测量学的地位和应用领域,通用和专用仪器的发展,在理论和实践上进行了归纳和总结。简要地叙述了工程测量在国内外的发展情况及其发展趋势。     

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.     

顾及DEM误差自相关的坡度计算模型精度分析

基于DEM的坡度计算,其误差来源于DEM误差、DEM结构和坡度计算模型。在顾及DEM误差自相关的前提下,对四种DEM坡度计算模型进行了分析和评价。研究表明,三阶不带权差分能给出较高的坡度计算精度;在局部窗口中,格网点数量越多,坡度计算越准确;等权比不等权的坡度计算模型更准确;DEM误差自相关结构形式对坡度计算无影响。进一步的理论分析和试验分析还表明：DEM误差自相关性的存在,不仅能够改善地形分析的精度,也能改善DEM自身精度。     

城市大比例尺航测成图质量评定

主要从大比例尺航测成图质量评定角度出发,提出了既要满足相应规范和用户要求,又要最大限度的发挥航测成图的优势,对产品质量做出公正、客观、正确的质量评价方法。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

松辽盆地宋芳屯油田扶杨油层孔隙结构及其影响因素

通过镜下观察,宋芳屯油田扶杨油层孔隙类型较多,以粒间孔为主。细管压力曲线上看,曲线较陡,分选差,孔隙结构特征参数总体上较差,与孔隙度、渗透率有一定的关系,大的孔隙对渗透率的贡献最大。扶杨油层的孔隙结构较复杂主要由于成岩作用影响,压实作用使孔隙空间显著缩小,胶结作用和自生粘土矿物生长使孔隙进一步缩小和复杂化,后期的溶蚀作用使孔隙空间增加。     

饱和软土压缩曲线的“反常”现象

饱和软土压缩试验时,经常出现压缩曲线“反常”、压缩系数“倒大”的现象。它是土的原始结构发生破坏前后的不同压缩性的客观反映。饱和软土的结构力很微弱,唯质量好的原状土才能见到这种“反常”。应从成孔、取样、测试及资料整理等多个环节保证其工程意义。     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.