地球化学景观吸引子的发现及其意义

勘查地球化学对异常评价的最大不确定性源于对地球化学景观特性的认识不够。我们应用构造相空间的方法分析了浙江儒岙幅（1:5万）水系沉积物测量的Ag含量数据，揭示了地球化学景观是具有低维吸引子（DZ≈2．9）的混饨系统。这一发现将对勘查地球化学中采样密度的选择、地球化学场模拟、异常评价等根本性问题产生重大影响。     

中国东部第四纪自然环境演化及庐山“冰碛层”堆积时期的自然环境研究

根据第四纪地层内孢粉组合和动物群等新资料恢复了我国东部各大区域第四纪各个时期的自然环境特征,其温暖期与干冷期的交替与深海沉积O~(18)温度变化趋势大致对应。庐山三次“冰期冰碛层”内孢粉组合表明均为温暖湿润针阔叶混交林景观,而不是寒冷的冰川环境。     

Crustal and upper mantle structures of the brazilian coast

The Rayleigh wave phase and group velocities in the period range of 24–39 sec, obtained from two earthquakes which occurred in northeastern brazil and which were recorded by the Brazilian seismological station RDJ (Rio de Janeiro), have been used to study crustal and upper mantle structures of the Brazilian coastal region. Three crustal and upper mantle models have been tried out to explain crustal and upper mantle structures of the region. The upper crust has not been resolved, due basically to the narrow period range of the phase and group velocities data. The phase velocity inversions have exhibited good resolutions for both lower crust and upper mantle, with shear wave velocities characteristic of these regions. The group velocity data inversions for these models have showed good results only for the lower crust. The shear wave velocities of the lower crust (3.86 and 3.89 km/sec), obtained with phase velocity inversions, are similar to that (=3.89 km/sec) found byHwang (1985) to the eastern South American region, while group velocity inversions have presented shear velocity (=3.75 km/sec) similar to that (=3.78 km/sec) found byLazcano (1972) to the Brazilian shield. It was not possible to define sharply the crust-mantle transition, but an analysis of the phase and group velocity inversions results has indicated that the total thickness of the crust should be between 30 and 39 km. The crustal and upper mantle model, obtained with phase velocity inversion, can be used as a preliminary model for the Brazilian coast.     

Predicting ground-motion variations at the Turkey-flat test site,California

Results of a single group participating in an international experiment are analyzed. The experiment served to verify computational predictions of the ground-motion variations due to near-surface geological effects at a site established for that purpose by the California Department of Conservation. Based on an acceleration record at a rock location, and geotechnical model of medium, records at the other locations of a nearby sedimentary deposit were predicted. A 2-D finite-difference sensitivity analysis suggested that the lateral wave-propagation effects are negligibly small, and locally 1-D computations are sufficient for the present site. Those computations are compared with observations not available to the authors during the blind prediction. Peak accelerations, peak velocities and RMS accelerations were predicted with errors less than 159%, 114% and 62%, respectively. Maxima of the response spectra were fitted within a factor of 2. The predicted and observed Husid's plots (i.e., the normalized cumulative plots of the acceleration squared) have the correlation coefficients 0.98. The detected misfits do not show any simple relation to the instrument location, component, frequency, or time.     

The solubility of iron sulphides in synthetic and natural waters at ambient temperature

A critical evaluation of literature values for the solubility products, K _sp ^NBS = [Fe²⁺][HS^–] Fe²⁺ HS^– (H _NBS ⁺ )^–1, of various iron sulphide phases results in consensus values for the pKs of 2.95 ± 0.1 for amorphous ferrous sulphide, 3.6 ± 0.2 for mackinawite, 4.4 ± 0.1 for greigite, 5.1 ± 0.1 for pyrrhotite, 5.25 ± 0.2 for troilite and 16.4 ± 1.2 for pyrite.Where the analogous ion activity products have been measured in anoxic freshwaters in which there is evidence for the presence of solid phase FeS, the values lie within the range of 2.6–3.22, indicating that amorphous iron sulphide is the controlling phase. The single value for a groundwater of 2.65 (2.98 considering carbonate complexation) agrees. In seawater four values range between 3.85 to 4.2, indicating that mackinawite or greigite may be the controlling phase. The single low value of 2.94 is in a situation where particularly high fluxes of Fe (II) and S (–II) may result in the preferential precipitation of amorphous iron sulphide. Formation of framboidal pyrite in these sulphidic environments may occur in micro-niches and does not appear to influence bulk concentrations. Calculations show that the formation of Fe₂S₂ species probably accounts for very little of the iron or sulphide in most natural waters. Previously reported stability constants for the formation of Fe (HS)₂ and (Fe (HS)₃)^– are shown to be suspect, and these species are also thought to be negligible in natural waters. In completely anoxic pore waters polysulphides also have a negligible effect on speciation, but in tidal sediments they may reach appreciable concentrations and lead to the direct formation of pyrite. Concentrations of iron and sulphide in pore waters can be controlled by the more soluble iron sulphide phase. The change in the IAP with depth within the sediment may reflect ageing of the solid phase or a greater flux of Fe (II) and S (–II) nearer the sediment surface. This possible kinetic influence on the value of IAPs has implications for their use in geochemical studies involving phase formation.     

地壳演化与成矿作用——以川滇地洼系“四层楼”铜矿床序列为例

提出川滇地洼系“四层楼”铜矿床序列的形成与陆壳演化的成生联系,是与本区陆壳由前地槽—地槽—地台—地洼演化各阶段与之相匹配的成矿作用的产物.与此同时,并总结了本区“四层楼”铜矿床序列的成矿作用具有明显的继承性、新生性、旋回性及层控性四大特点和多因复成矿床的成矿模式.     

Astrophysical molecules of AlH and CaH: RKR potential and dissociation energies

The true potential energy curves for the electronic ground states of astrophysically important AlH and CaH molecules are constructed by the Rydberg-Klein-Rees method. Empirical potential functions, of three-parameters by Lippincott, of five-parameters by Hulburt and Hirsch-felder and, of electronegativity by Szöke and Baitz, are examined for the adequacy to represent the true curve. From the best-fitting function, the dissociation energiesD ₀ ⁰ of AlH and CaH molecules are estimated to be 2.99 ± 0.08 and 2.72 ± 0.06 eV respectively. The force constants indicate that these values are of correct magnitude.     

Giant submarine landslide grooves in the Neoproterozoic/Lower Cambrian Phe Formation, northwest Himalaya: Mechanisms of formation and palaeogeographic implications

Giant groove casts have been found in the upper Proterozoic to Lower Cambrian Phe Formation (Haimanta Group), a siliciclastic sandstone/shale succession in the Tethyan Zone of the Higher Himalaya tectonic unit. The grooves are among the largest linear erosion structures related to submarine mass-movements observed in the geologic record. They are up to 4 m wide, about 0.2 m deep and can be traced for more than 35 m without changing their character. The grooves are straight, subparallel to cross-cutting striations with shallow semi-circular cross-sections and well-defined superimposed minor ridges and grooves. Groove casts exist on the soles of several sandstone beds within a 73 m thick logged section, commonly associated with flute casts. Their characteristics were compared with several other types of ancient and modern submarine linear erosion structures. A sand-rich, non-channelized basin floor depositional environment is inferred from the lithofacies, the combination of sedimentary structures, the lack of coarse-grained pebbly facies, the lateral continuity of beds, and the lack of channel structures. The grooves probably formed by laminar debris flows/concentrated density flows dragging blocks of already lithified sediment across the basin floor. When the bedding is structurally rotated back to horizontal, the groove casts show consistent North–South oriented palaeocurrent trends, with South-directed palaeocurrent directions indicated by flute casts. These palaeocurrent orientations contrast with previous palaeogeographic reconstructions of this area, which propose sediment delivery from the South. We therefore suggest a new “double provenance” model for the spatial relationship of late Proterozoic to Early Cambrian strata of the Himalaya, in which Lesser and Tethyan Himalayan age-equivalent sediment was deposited in a connected basin, where the former received detritus from the South, and the latter from a hitherto unknown source in the North. One possible candidate for this northern source is the South China Block and an associated Neoproterozoic volcanic arc.     

Age estimates of coastal terraces in the Andaman and Nicobar Islands and their tectonic implications

The great Indian Ocean earthquake of December 26, 2004 caused significant vertical changes in its rupture zone. About 800 km of the rupture is along the Andaman and Nicobar Islands, which forms the outer arc ridge of the subduction zone. Coseismic deformation along the exposed land could be observed as uplift/subsidence. Here we analyze the morphological features along the coast of the Andaman and Nicobar Islands, in an effort to reconstruct the past tectonics, taking cues from the coseismic effects. We obtained radiocarbon dates from coastal terraces of the island belt and used them to compute uplift rates, which vary from 1.33 mm yr^− 1 in the Little Andaman to 2.80 mm yr^− 1 in South Andaman and 2.45 mm yr^− 1 in the North Andaman. Our radiocarbon dates converge on  600 yr and  1000 yr old coastal uplifts, which we attribute to the level changes due to two major previous subduction earthquakes in the region.     

Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.