ISO9000质量体系标准与HAF0400在核电海域工程设计中的运用

本文是作者结合核电海域工程设计任务的体会,将ＩＳＯ９０００ 系列标准与核安全法规（ＨＡＦ０４００）在工程中相结合,建立一个既符合ＩＳＯ９０００ 标准又能满足法规要求的质量保证体系。     

四川盆地大气边界层气象资料数据系统

本文介绍在IBM-PC微机(或兼容机)上利用DBASEⅡ、BASIC和FOR-TRAN语言设计和研制的一套大气边界层气象资料数据库软件系统,给出它的主要结构和功能。该系统实现了大气边界层气象资料共享和信息化处理,不但操作简便、快速、准确、稳定性好,而且具有较强的通用性和较大的实用价值。     

测距仪倾斜引起的误差分析与改正

重点研究积木式全站仪在大垂直角测距中由于测距仪中心与经纬仪中心不一致而引起的测距误差,针对这些误差的来源及特征,制定出相应的修正措施,从而达到提高测距精度的目的。     

基于陕西省的乡镇界线标准画法探究

通过分析陕西省乡镇界线的分布特点,根据影响乡镇界线在地图上表示的诸多因素,研究乡镇界线地图的标准规范的制图表达方式,定义地图上各类要素表示的制图表达原则,提出乡镇界线在地图上的表达方式.解决了基于乡镇界线地图制图的标准画法,满足有关乡镇界线地图的制作要求.     

Compensation of time‐delay for control of civil engineering structures

Time‐delay is an important issue in structural control. Applications of unsynchronized control forces due to time‐delay may result in a degradation of the control performance and it may even render the controlled structures to be unstable. In this paper, a state‐of‐the‐art review for available methods of time‐delay compensation is presented. Then, five methods for the compensation of fixed time‐delay are presented and investigated for active control of civil engineering structures. These include the recursive response method, state‐augmented compensation method, controllability based stabilization method, the Smith predictor method and the Pade approximation method, all are applicable to any control algorithm to be used for controlled design. Numerical simulations have been conducted for MDOF building models equipped with an active control system to demonstrate the stability and control performance of these time‐delay compensation methods. Finally, the stability and performance of the phase shift method, that is well‐known in civil engineering applications, have also been critically evaluated through numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.     

耦合PML边界条件的三维大地电磁二次场有限差分法

本文将大地电磁场分解为一次场和二次场,应用交错网格有限差分法模拟计算大地电磁二次场,并引入各向异性最佳匹配层(PML)吸收边界条件作为二次场边界条件,实现了耦合PML吸收边界条件的三维大地电磁二次场有限差分正演模拟.为了确保正演的稳定性和效率,QMR求解器和磁感应矢量散度校正技术被用于PML吸收边界条件下系数矩阵的快速求解.三维模型正演响应表明,基于二次场的三维大地电磁有限差分算法具有较高的计算精度和可靠性.通过计算分析不同PML吸收因子条件的大地电磁正演结果,显示在适当的吸收因子下,PML吸收边界条件可较大幅度的减小外边界距离,从而有效的压缩模型求解空间,最终提高三维大地电磁正演模拟的效率.     

2015年尼泊尔MS8.1大地震孕育的深层过程与发生的动力学响应

2015年4月25日发生在尼泊尔博克拉M_S8.1大地震的深层动力过程与“地中海-喜马拉雅-南亚地震带”的中段喜马拉雅地震活动带密切相关.这次大地震是该地震强烈活动带上长期以来深部物质与能量强烈交换、运动,并导致构造活动和应力积累的产物.综合分析与研究提出：（1）博克拉M_S8.1大地震的孕育、发生和发展具有长期活动和近年来相邻地带地震活动频繁的背景;这一地带自1505年-2015年,即500多年来相继发生多次M_S≥8.0的大地震.（2）这一地带具有特异的地球物理边界场响应和深层动力过程,显示深部物质的重新分异、调整与能量交换.（3）大地震发生与周边地带应力场分布特异,壳、幔结构与介质属性变异及破裂响应与断层面解的属性相关.（4）喜马拉雅地带的三条北倾断裂带以不同角度向深部延伸、震源位置及浅表层的变形特征尚应深化理解.（5）M_S8.1大地震的发生对相邻地带的波场影响强烈,故应强化高精度地球物理场的观测和探测,以“捕捉”未来可能大地震的孕育与发生.     

Boundary frame contribution in coupled and uncoupled steel plate shear walls

The steel plate shear wall (SPSW) system is a robust option for earthquake resistance due to the strength, stiffness, ductility and energy dissipation that it provides. Although thin infill plates are efficient for resisting lateral loads, boundary frames that are proportioned based on capacity design requirements add significant structural weight that appears to be one of the factors limiting the use of the system in practice. An alternate configuration, the SPSW with coupling (SPSW‐WC), was explored recently as an option for increasing architectural flexibility while also improving overall system economy and seismic performance. The SPSW‐WC, which extensively employs flexural boundary frame contribution, has shown promise in analytical, numerical and experimental studies, but recent research on uncoupled SPSWs suggests that boundary frame contribution should not be considered for carrying seismic design shear. As a result, in the present study, boundary frame contribution in SPSWs was explored with detailed three‐dimensional finite element models, which were validated against large‐scale SPSW‐WC tests. Six‐story systems were considered, and the study matrix included single and double uncoupled SPSWs along with coupled SPSWs that had various degrees of coupling. Variations in design methodology were also explored. The modeling framework was employed to conduct static monotonic and cyclic pushover analyses and dynamic response history analysis. These analyses demonstrate the beneficial effect of coupling in SPSWs and illustrate the need to consider boundary frame contribution in design of coupled SPSWs. In addition, sharing design shear between the infill plate and the boundary frame is more generally shown to not be detrimental if this sharing is done in the design stage based on elastic analysis and the resulting boundary frame provides adequate secondary strength and stiffness following infill plate yielding. Copyright © 2017 John Wiley & Sons, Ltd.     

地震作用下双薄壁高墩刚构桥桥台处的碰撞效应及减碰措施

针对双薄臂高墩连续刚构桥两侧桥台处主梁与背墙的碰撞现象,基于桥台-背土作用简化模型和Kelvin碰撞模型,采用非线性时程法研究碰撞对双薄臂墩地震剪力、弯矩、曲率和位移,以及支座纵向变形的影响。提出可牺牲背墙、阻尼器、加强型横系梁等三种减碰措施,并对比分析其减碰效果。研究表明:碰撞会显著增大高墩的地震内力和曲率响应,降低墩顶位移和支座的纵向变形;碰撞刚度的变化对碰撞效应的影响在20%以内;可牺牲背墙和阻尼器两种减碰措施均可大幅降低桥墩的地震内力和曲率,使其接近不考虑碰撞时的状态,阻尼器同时还可以保护支座不超过容许变形,而可牺牲背墙则会导致支座的地震破坏;加强型横系梁不能发挥减碰作用,反而会增大桥墩的地震响应。     

分区分类的生命线工程地震直接经济损失研究

生命线工程的震害及损失评估工作对于震害防御和震后地震应急工作有着极其重要的意义。 但是, 生命线工程是一个复杂庞大的网络系统, 目前对其开展的震害及损失评估研究工作存在着很大的局限性和不确定性。 本文充分利用研究较多且较系统的建筑物震害及损失评估结果, 结合历次典型历史地震震害中建筑物和生命线震害情况, 通过分析建筑物损失和生命线工程损失的数量关系, 建立二者之间的关联模型; 通过对人口、 GDP、 土地利用等公里网格数据进行分析, 给出中国大陆地区的分区分类原则, 建立分区分类的生命线工程地震直接经济损失分析模型; 基于GIS软件平台, 开发了生命线工程地震直接经济损失分析模块, 利用该模块, 得出了四川省不同地震烈度下的生命线工程直接经济损失空间分布情况。