Chalk shore platform erosion in the vicinity of sea defence structures and the impact of construction methods

Erosion of the intertidal chalk platform in the vicinity of groynes and seawalls is evident to the naked eye along many stretches of the engineered coastline of southeast England, leading to undermining and eventually failure of these structures. However, quantification of the magnitude and spatial extent of the erosion has been difficult to date because of a lack of data about the past elevation of the platform. The application of softcopy photogrammetry makes it possible to recreate past platform elevations from historic air photographs and to compare these with elevations from modern air photographs. Coastal sea defence structures have been installed along the chalk coast east of Brighton at various dates over the past 70 years. During this period, the construction methods have changed from predominantly manual labour to a reliance on heavy machines. The analysis of erosion patterns around structures built since the 1970s using heavy machinery show that surface lowering is 4 to 25 times greater in the vicinity of these structures than across the platform as a whole. In contrast, there is no similar pattern of increased erosion around structures built using predominantly manual labour in the 1930s. A four fold increase in average surface lowering is found also along a vehicle trackway that crosses the mid platform. Depressions developed by enhanced lowering in the front of seawalls generate their own dynamic of increased erosion by trapping pebbles and cobbles that enhance the abrasion of the chalk through bedload transport under standing waves in front of the walls.     

Fractal Dimension and Fractals in Ocean Engineering

- This paper discusses the application of fractal dimension and fractals in ocean engineering. To handle some ocean environment problems, the existing fractal method, in which the fractal dimension is a constant, can be used. For some complicated problems in ocean engineering, this paper presents the concept of the variable dimension fractals (D = f(r)), i. e., the fractal dimension D is the function of characteristic scale r instead of a constant. By using variable dimension fractals, several deformation and stress states of offshore structures are described.     

地质环境特征及工程适应性与选择性分析——青岛市城市地质环境研究

根据地形地貌、地质构造、水文地质条件将青岛市划分为６个工程地质亚区，论述了各亚区地质环境特征，结合不同城市建筑工程特点，进行了工程场地适应性和选择性分析评价，为充分合理利用城市地质环境提供良好依据     

四阶奇异边值问题无穷多个正解存在性的一个注记

本文考虑四阶奇异边值问题x( 4 ) =λa(t) f (t,x(t) ) ,0 相似文献   

水下工程项目监理的任务与条件

结合近年来参与有关水下工程检测和项目监理的实践体验 ,从总结水下工程项目的基本特征着手 ,分析了水下工程项目监理的主要任务 ,并结合对于实施水下工程项目监理必备装备条件的探讨 ,介绍了国内外现有水下监测技术装备的开发应用状况     

An Experimental Study of Several Special Issues Regarding the Ice Force on Conical Structures

The effect of the cone spacing of a conieal structure on the ice force is studied by model experiments. The ice force reduction coefficient presented in this paper expresses the relationship between the ice force and the arrangement of cones. The experiments prove that the mode of the ice failure before the boundary of upward-downward bending cone (UDBC) is crushing. A conclusion can also be drawn from the experiments that the ice force on the boundary of UDBC is by far less than that on a vertical pile with the same diameter. Moreover, the ice force frequencies on upright and inve-rted cones are obtained under the field condition of the platform JZ20-2, respectively. The results show that the alterna-tion of the ice force on UDBC can hardly induce resonance of platform JZ20-2.     

Non-local impact of large-scale engineering in harbors and gulfs on the environment

A system of numerical tools to predict the non-local long-term impact of large-scale constructions on the environment is described. The predictions have to be results of successive examination of free water oscillations, turbulent boundary layers on the sea bottom, and turbulent pulsation effects on sediment transport. Numerical results related to free water oscillations in diverse gulfs are shown, and non-local effects of the dam construction are found for an example of the Baltic Sea. Feasibility of suggested tools for turbulent flow is manifested.     

Depth- and current-induced effects on wave propagation into the Altamaha River Estuary, Georgia

A study of sea surface wave propagation and its energy deformation was carried out using field observations and numerical experiments over a region spanning the midshelf of the South Atlantic Bight (SAB) to the Altamaha River Estuary, GA. Wave heights on the shelf region correlate with the wind observations and directional observations show that most of the wave energy is incident from the easterly direction. Comparing midshelf and inner shelf wave heights during a time when there was no wind and hence no wave development led to an estimation of wave energy dissipation due to bottom friction with corresponding wave dissipation factor of 0.07 for the gently sloping continental shelf of the SAB. After interacting with the shoaling region of the Altamaha River, the wave energy within the estuary becomes periodic in time showing wave energy during flood to high water phase of the tide and very little wave energy during ebb to low water. This periodic modulation inside the estuary is a direct result of enhanced depth and current-induced wave breaking that occurs at the ebb shoaling region surrounding the Altamaha River mouth at longitude 81.23°W. Modelling results with STWAVE showed that depth-induced wave breaking is more important during the low water phase of the tide than current-induced wave breaking during the ebb phase of the tide. During the flood to high water phase of the tide, wave energy propagates into the estuary. Measurements of the significant wave height within the estuary showed a maximum wave height difference of 0.4 m between the slack high water (SHW) and slack low water (SLW). In this shallow environment these wave–current interactions lead to an apparent bottom roughness that is increased from typical hydraulic roughness values, leading to an enhanced bottom friction coefficient.     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

A Numerical Study on the Structure and Dynamics of Turbulence in Oscillatory Bottom Layer Flow over A Flat or Rippled Bed

1 .IntroductionUnder the influence of surface waves ,sandripples often appear on beaches . Whenthe amplitudeof water oscillationis sufficientlylarge ,vortices are formed onthe lee of every sand ripple crest . A-mongthese vortices ,the most important are t…