Better air for better health: Forging synergies in policies for energy access,climate change and air pollution

Air pollution and its related health impacts are a global concern. This paper addresses how current policies on air pollution, climate change and access to clean cooking fuels can effectively reduce both outdoor and household air pollution and improve human health. A state of the art modeling framework is used that combines an integrated assessment model and an atmospheric model to estimate the spatial extent and distribution of outdoor air pollution exposures. Estimates of household energy access and use are modeled by accounting for heterogeneous household energy choices and affordability constraints for rural and urban populations spanning the entire income distribution. Results are presented for 2030 for a set of policy scenarios on air pollution, climate change and energy access and include spatially explicit emissions of air pollutants; ambient concentrations of PM2.5; and health impacts in terms of disability adjusted life years (DALYs) from both ambient and household air pollution. The results stress the importance of enforcing current worldwide air quality legislation in addressing the impacts of outdoor air pollution. A combination of stringent policies on outdoor air pollution, climate change and access to clean cooking fuels is found to be effective in achieving reductions in average ambient PM2.5 exposures to below World Health Organization recommended levels for a majority of the world's population and results in a significant decline in the global burden of disease from both outdoor and household air pollution.     

Snow cover and snowmelt of an extensive High Arctic wetland: spatial and temporal seasonal patterns

Abstract

This study examined the end-of-winter snow storage, its distribution and the spatial and temporal melt patterns of a large, low gradient wetland at Polar Bear Pass, Bathurst Island, Nunavut, Canada. The project utilized a combination of field observations and a physically-based snowmelt model. Topography and wind were the major controls on snow distribution in the region, and snow was routinely scoured from the hilltop regions and deposited into hillslopes and valleys. Timing and duration of snowmelt at Polar Bear Pass were similar in 2008 and 2009. The snowmelt was initiated by an increase in air temperature and net radiation receipt. Inter-annual variability in spatial snowmelt patterns was evident at Polar Bear Pass and was attributed to a non-uniform snow cover distribution and local microclimate conditions. In situ field studies and modelling remain important in High Arctic regions for assessing wetland water budgets and runoff, in addition to model parameterization and validation of satellite imagery.

Editor Z.W. Kundzewicz

Citation Assini, J. and Young, K.L., 2012. Snow cover and snowmelt of an extensive High Arctic wetland: spatial and temporal seasonal patterns. Hydrological Sciences Journal, 57 (4), 738–755.     

Energy balance and evaporation loss of an agricultural reservoir in a semi‐arid climate (south‐eastern Spain)

A typical agricultural water reservoir (AWR) of 2400 m² area and 5 m depth, located in a semi‐arid area (southern Spain), was surveyed on a daily basis for 1 year. The annual evaporation flux was 102·7 W m^?2, equivalent to an evaporated water depth of 1310 mm year^?1. The heat storage rate G exhibited a clear annual cycle with a peak gain in April (G ～ 45 W m^?2) and a peak loss in November (G ～ 40 W m^?2), leading to a marked annual hysteretic trend when evaporation (λE) was related to net radiation (R_n). λE was strongly correlated with the available energy A, representing 91% of the annual AWR energy loss. The sensible heat flux H accounted for the remaining 9%, leading to an annual Bowen ratio in the order of 0·10. The equilibrium and advective evaporation terms of the Penman formula represented 76 and 24%, respectively, of the total evaporation, corresponding to a annual value of the Priestley–Taylor (P–T) coefficient (α) of 1·32. The P–T coefficient presented a clear seasonal pattern, with a minimum of 1·23 (July) and a maximum of 1·65 (December), indicating that, during periods of limited available energy, AWR evaporation increased above the potential evaporation as a result of the advection process. Overall, the results stressed that accurate prediction of monthly evaporation by means of the P–T formula requires accounting for both the annual cycle of storage and the advective component. Some alternative approaches to estimating R_n, G and α are proposed and discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Estimating the crush zone size under a cutting tool in coal

Summary As part of an effort to understand the mechanics of fine fragment formation in coal, which is important in studies of respirable dust due to mining, fracture toughness measurements and the strain energy density (SED) theory were applied to calculate the crush zone size under a cutting tool in coal. This zone is the major source of fine fragments in the 1 to 10 µm size range. The model used in these calculations is a boundary element program containing a failure criterion based on the SED theory. The boundary element program calculates linear elastic stresses at numerous points in the coal material ahead of a cutting bit. These stresses are then input to a subroutine called critical flaw length and orientation (CFLO) which uses the SED theory to determine the CFLO for a small crack at the boundary element stress computation point. The extent of crushing is based on earlier postulates about the role of inherent flaws in a fragmentation process. To form 1 to 10 µm fragments requires firstly a local stress strong enough to activate flaws with a characteristic length less than 1 to 10 µm and secondly, a flaw density sufficient to provide an average spacing between flaws also on the order of 1 to 10 µm. The locus of active 10 µm flaws represents the maximum possible extent of fine fragmentation in the 10 µm or less size range assuming that a sufficient inherent flaw density exists. The approach offers a first order approximation to the extent of crushing under a tool tip. The size and shape of the crush zone volume is affected by the attack angle and geometry of the tool.     

温冰川上的冰震——以奥地利Hohe Tauern地区Schlatenkees冰川为例

在奥地利Hohe Tauern的Schlatenkees冰川上布置了两组地震仪测量网,用电动力垂直地震仪记录到了约1200次冰震。找出了地震学参数彼此之间的几种关系。并根据优势频率,将冰震分成了4组。记录到的震动事件的震深为25—130m,震源半径为12—67m,地震矩为4.23×10~5—6.52×10~7Nm,地震能为9.1—1.34x10~5J,应力降为0.16—32.04hPa。     

天山乌鲁木齐河源冰川与空冰斗辐射气候的计算结果

提要 在朝向、坡度和山体遮蔽度影响下,与水平面相比朝北冰川和朝南空冰斗在太阳偏角为15°,0°和-10°时的平均太阳辐射能量损失分别是40.6％和21.0％。1号冰川东支夏季消融期内自然冰雪面辐射场内辐射平衡各分量平均日总量值受地形因素和反射性能的控制而显示出由西北侧向东南侧逐渐降低的带状分布规律。晴朗少云天气下的总辐射和有效辐射的垂直梯度分别是14.52Wm~(-2)/100m和2.77Wm~(-2)/100m。     

准各向异性粘弹介质地震波的数字仿真

本文论述准各向异性粘弹波动方程有限元数值解地震波响应的原理与计算方法,并给出地震衰减因子与方程中粘滞系数的计算关系式。列出了所研制的地面记录地震剖面与井中记录垂直地震剖面,以及波场时间切片图、散度与旋度图、应变能与动能的时间切片图。本方法适于任意分层形态且层间物性参数为强间断的实际地震剖面的仿真,旨在研究正问题以实现反问题。     

矿物热敏参数测试仪及其在地质找矿中的应用

介绍了国内外第一台矿物热敏参数测试仪研制的原理、应用范围和对一些金属矿物、半导体矿物的测试情况以及仪器在浙江、赣南等地区金矿找矿中的初步应用。