SDINS/GPS in-flight alignment using GPS carrier phase rate

The alignments of the strapdown inertial navigation system (SDINS) utilizing GPS carrier phase rate measurements is introduced. In this paper, a measurement model of GPS carrier phase rate under two antenna configurations is derived in order to be used for the SDINS alignment process. For in-flight alignment, the performance of the proposed SDINS/GPS integration method is analyzed using the covariance analysis and the overall performance is briefly confirmed by the navigation result of a van test. Furthermore, we find that during in-flight alignment the proposed SDINS/GPS integrated system using GPS carrier phase rate measurements can be implemented in real time because the integer ambiguity problem resulting from carrier phase measurements is avoided.     

多卫星系统融合精密单点定位性能分析

随着全球四大卫星导航系统格局的成型,卫星定位系统已从单系统模式发展为如今多系统、多频率融合定位、交互操作的模式。在分析多系统精密单点定位模型及各误差项处理策略的基础上,利用RTKLIB进行GPS,GLONASS,GALILEO,BDS多系统融合精密单点定位试验,并分析其动/静态定位性能。实验结果表明:在单系统空间几何构型较差的情况下,多系统融合精密单点定位较单GPS定位精度可提高20%~40%,收敛时间可缩短35%~50%;在截止高度角超过40°的情况下,单系统会因可见卫星数量不足而无法完成连续定位,而多系统仍能实现高精度的连续定位。这在城区、山区或卫星遮蔽较严重的不利环境中有重要的利用价值。     

新冠病毒疫情期间复工复产卫星遥感监测

本文利用美国新一代极轨卫星NPP搭载的VIIRS载荷数据反演获得的热点数据,以及美国NASA的Aura卫星搭载的OMI载荷的二氧化氮对流层柱浓度资料,对中国地区2020-01—02及2019年同期,以及抗击疫情期间和后期复工复产的情况进行监测。监测结果表明：（1）2020-02较1月份及2019年同期相比,工业企业的耗能水平却出现显著降低,NO₂浓度呈现显著下降趋势。（2）全国工业热源点数和分布范围及密度自2020-02-03正式复工后稳步提升。湖北省除武汉、黄石和鄂州地区仍可监测到少数热点外,其他地区2月份均未再监测到任何热点,也证明了湖北基本没有复工迹象。（3）疫情得到基本控制之后,京津冀地区工业热源点有显著增加,但新增区域一般仍处于低能耗水平。从全国大气NO₂柱浓度监测来看,复工开始前后与2019年同期相比,污染物浓度均呈现明显下降趋势,说明复工强度有限。（4）到3月初工业热源点及其能耗水平出现显著升高,中国大部分地区的热源企业虽已逐步复工生产,说明工业产能较2月有显著提升,但生产规模或产能并未完全恢复。     

顾及垂直递减率函数的中国区域大气加权平均温度模型

大气加权平均温度(T_m)是全球导航卫星系统(GNSS)水汽监测的关键参数。针对中国区域地形起伏较大的特点,本文构建了顾及精细季节变化的T_m垂直递减率函数模型,在此基础上,利用2007—2014年的Global Geodetic Observing System (GGOS) atmosphere格网数据建立了中国区域的T_m格网新模型(简称为CT_m模型)。以2015年GGOS格网数据和无线电探空资料为参考值,对CT_m模型进行精度检验,并与常用的Bevis公式和GPT2w模型进行比较分析。结果表明:①以GGOS格网数据为参考值,CT_m模型的年均偏差和均方根误差(RMS)分别为-0.52 K和3.28 K,相比于GPT2w-5和GPT2w-1模型,精度(RMS值)分别提高了27%和13%;②以探空数据为参考值,CT_m模型的年均偏差和RMS误差分别为0.26 K和3.75 K,相对于GPT2w-5和GPT2w-1模型,精度分别提高了21%和1...     

Assessing the performance of a large-scale irrigation system by estimations of actual evapotranspiration obtained by Landsat satellite images resampled with cubic convolution

Remote sensing techniques allow monitoring the Earth surface and acquiring worthwhile information that can be used efficiently in agro-hydrological systems. Satellite images associated to computational models represent reliable resources to estimate actual evapotranspiration fluxes, ET_a, based on surface energy balance. The knowledge of ET_a and its spatial distribution is crucial for a broad range of applications at different scales, from fields to large irrigation districts. In single plots and/or in irrigation districts, linking water volumes delivered to the plots with the estimations of remote sensed ET_a can have a great potential to develop new cost-effective indicators of irrigation performance, as well as to increase water use efficiency. With the aim to assess the irrigation system performance and the opportunities to save irrigation water resources at the “SAT Llano Verde” district in Albacete, Castilla-La Mancha (Spain), the Surface Energy Balance Algorithm for Land (SEBAL) was applied on cloud-free Landsat 5 Thematic Mapper (TM) images, processed by cubic convolution resampling method, for three irrigation seasons (May to September 2006, 2007 and 2008). The model allowed quantifying instantaneous, daily, monthly and seasonal ET_a over the irrigation district. The comparison between monthly irrigation volumes distributed by each hydrant and the corresponding spatially averaged ET_a, obtained by assuming an overall efficiency of irrigation network equal to 85%, allowed the assessment of the irrigation system performance for the area served by each hydrant, as well as for the whole irrigation district. It was observed that in all the investigated years, irrigation volumes applied monthly by farmers resulted generally higher than the corresponding evapotranspiration fluxes retrieved by SEBAL, with the exception of May, in which abundant rainfall occurred. When considering the entire irrigation seasons, it was demonstrated that a considerable amount of water could have been saved in the district, respectively equal to 26.2, 28.0 and 16.4% of the total water consumption evaluated in the three years.     

The success rate and precision of GPS ambiguities

 An application of a theorem on the optimality of integer least-squares (LS) is described. This theorem states that the integer LS estimator maximizes the ambiguity success rate within the class of admissible integer estimators. This theorem is used to show how the probability of correct integer estimation depends on changes in the second moment of the ambiguity `float' solution. The distribution of the `float' solution is considered to be a member of the broad family of elliptically contoured distributions. Eigenvalue-based bounds for the ambiguity success rate are obtained. Received: 11 January 1999 / Accepted: 2 November 1999     

真江蓠杭州湾海域栽培试验及生态因子对藻体生长的影响

在杭州湾上海金山海域进行了真江蓠(Gracilaria verrucosa)栽培试验并在实验室内研究了温度、盐度和光照强度对真江蓠生长的影响。结果表明,温度、盐度和光照强度对真江蓠的生长影响极显著(P0.01)。真江蓠生长适宜温度为20~30℃;适宜盐度为15~25;适宜光照强度在90μmol/(m2.s)左右。温度、盐度和光照强度对真江蓠生长存在显著的交互效应(P0.05),三者的最佳组合为温度25℃、盐度20和光照强度90μmol/(m2.s)。海区栽培实验表明真江蓠可在杭州湾海域正常生长,全年平均特定生长率(RSG)为9.42%/d。     

基于独立分量分析的多次波自适应相减技术

针对多次波自适应相减这个关键问题,文中首次提出利用独立分量分析技术来实现多次波和一次波的分离（简称ICAAMS）. 现有的多次波自适应相减技术大都是采用输出信号（一次波）能量最小准则,基于二阶统计量的技术. 本文提出的ICAAMS采用了输出信号非高斯性最大准则,并利用高阶统计量来表征非高斯性. 简单的褶积模型和复杂的有限差分模型资料处理结果表明, 本文提出的方法可以有效地分离一次波和多次波.     

基岩弯曲河段洪水水流结构的试验研究

低坡度基岩弯曲河流在地质构造控制区域广泛存在（床面坡度小于5‰）,洪水对基岩弯曲河流的河床淤积与侵蚀具有较大影响,但以往研究对基岩弯曲河流的洪水动力结构认识不足。通过几何概化基岩弯曲河段,考虑Froude相似与边壁粗糙,建立基岩弯曲河道概化模型,分析洪水下的弯道水面线分布、时均流场与湍流结构特性。结果表明:在洪水流量下,弯顶上游出现最小水面横比降、凸岸水流分离、凹岸双环流发育、流速下潜且二次环流强度达到最大,在弯顶下游水面横比降达到最大并出现环流分裂;床面切应力分布于凸岸水流分离以及弯顶上游中心区域,横向动量输移集中于弯顶上游。试验结果为基岩弯曲河道中的床面侵蚀与沿程淤积提供了水动力方面的解释。     

华北克拉通基底花岗质片麻岩变形和流变学研究——以辽西寺儿堡地区为例

辽西寺儿堡镇新太古代花岗质片麻岩内发育的宏观、微观构造变形特征表明该地区曾遭受了强烈的韧性变形改造。花岗质岩石变形程度在初糜棱岩–糜棱岩之间,岩石经历了SWW向左行剪切作用改造。岩石中石英有限应变测量判别结果表明,构造岩类型为L-S型,为平面应变。岩石的剪应变平均值为1.43,运动学涡度值为0.788~0.829,指示岩石形成于以简单剪切为主的一般剪切变形中。此外,石英颗粒以亚颗粒旋转重结晶和颗粒边界迁移重结晶作用为主,长石颗粒塑性拉长,部分发生膨凸式重结晶作用;石英组构特征(EBSD)揭示石英以中–高温柱面滑移为主;石英颗粒边界具有明显的分形特征,分形维数值为1.151~1.201,指示了中高温变形条件。综合石英、长石的变形行为、石英组构特征以及分形法Kruhl温度计的判别结果,推断辽西寺儿堡镇新太古代花岗质片麻岩经历过480~600℃的中高温变形,其同构造变质相为高绿片岩相-低角闪岩相。花岗质岩石的古差异应力为10.62~12.21 MPa,估算的应变速率为10~(–11.67)~10~(–13.34) s~(–1),即缓慢的变形,可能记录早期中高温、低应变速率的韧性变形过程,反映华北克拉通基底中下部地壳变形特征。