Facies characteristics and architecture related to palaeodepth of Holocene fjord–delta sediments

Lithofacies characteristics and depositional geometry of a sandy, prograding delta deposited as part of the Holocene valley‐fill stratigraphy in the Målselv valley, northern Norway, were examined using morpho‐sedimentary mapping, facies analysis of sediments in exposed sections, auger drilling and ground penetrating radar survey. Various lithofacies types record a broad range of depositional processes within an overall coarsening‐upward succession comprising a lowermost prodelta/bottomset unit, an intermediate delta slope/foreset unit containing steeply dipping clinoforms and an uppermost delta plain/topset unit. Bottomset lithofacies typically comprise sand‐silt couplets (tidal rhythmites), bioturbated sands and silts, and flaser and lenticular bedding. These sediments were deposited from suspension fall‐out, partly controlled by tidal currents and fluvial effluent processes. Delta foreset lithofacies comprise massive, inverse graded and normal graded beds deposited by gravity‐driven processes (mainly cohesionless debris flows and turbidity currents) and suspension fall‐out. In places, delta foreset beds show tidal rhythmicity and individual beds can be followed downslope into bottomset beds. Delta plain facies show an upward‐fining succession with trough cross‐beds at the base, followed by planar, laminated and massive beds indicative of a bedload dominated river/distributary system. This study presents a model of deltaic development that can be described with reference to three styles within a continuum related primarily to water depth within a basin of variable geometry: (i) bypass; (ii) shoal‐water; and (iii) deep‐water deltas. Bypass and deep‐water deltas can be considered as end members, whereas shoal‐water deltas are an intermediate type. The bypass delta is characterized by rapid progradation and an absence of delta slope sediments and low basin floor aggradation due to low accommodation space. The shoal‐water delta is characterized by rapid progradation, a short delta slope dominated by gravity‐flow processes and a prodelta area characterized by rapid sea‐floor aggradation due to intense suspension fallout of sandy material. Using tidal rhythmites as time‐markers, a progradation rate of up to 11 m year^?1 has been recorded. The deep‐water delta is characterized by a relatively long delta slope dominated by gravity flows, moderate suspension fall‐out and slow sea‐floor aggradation in the prodelta area.     

流体包裹体分析法在铀矿床研究中的应用——以相山铀矿田邹家山、沙洲矿床为例

矿物包裹体在形成过程中保存了所在地质环境及不同阶段的物理化学条件信息,并且其形成后没有外来物质的加入和自身物质的带出,因此对流体包裹体进行分析是研究成矿地质环境的重要手段之一。本文以相山铀矿田邹家山、沙洲矿床为例,采用流体包裹体分析法计算矿床的成矿深度和剥蚀厚度。结果表明,邹家山矿床成矿深度320～1640m,剥蚀厚度320～416m;沙洲矿床成矿深度38～1425m,剥蚀厚度190～240m,大体上与前人研究结论一致。Haas（1976）图解法在沙洲矿床成矿深度研究中比较接近合理,邵洁涟等（1986）的经验公式法在邹家山矿床成矿深度研究中最为合理,Bischoff et al.（1991）T-ρ相图法误差均较大。     

深地震探测揭示的华北及东北地区莫霍面深度

从20世纪70年代以来,在我国华北及东北地区进行了大量的深地震探测研究.本文通过对该地区的深地震探测研究的总结和梳理,探讨了该区的莫霍面深度与变化及其地球动力学意义.结果表明:华北地区最深的莫霍面出现在内蒙褶皱带内,最浅的莫霍面出现在渤海湾盆地.东北地区最深的莫霍面出现在大兴安岭地区,最浅的莫霍面出现在依兰-伊通断裂带...     

Metallogenic characteristics of the region of Northwest Hebei and analysis of ore prospecting potential in its peripheries

The region of Northwest Hebei is an area where Au-Ag polymetallic ore depsits are concentrated in Hebei Province. There were divided the Au ore-concentrated region with the magmatic-metamorphic diamictite zone as the center and the perpheral cover-strata zone and Ag-polymetallic metallogenic zone along the line of Xuanhua-Songli-Chicheng. Research on mantle branch structure indicates that Au-Ag polymetallic ore-forming materials come mainly from the deep interior of the Earth. The ore-forming materials tend to migrate upwards through the multi-stage evolution of mantle plume, and are concentrated as ores in the favourable tectonic expansion zone of a mantle branch structure. As viewed in plane, from the center to the periphery and as viewed in space, from the lower part to the upper part there exists Au-Ag-Pb-Zn zonation, as evidenced by drilling data from a number of mines. So, there is still great potential for ore prospecting in the region of Northwest Hebei.     

Effect of anti-slosh baffles on free liquid oscillations in partially filled horizontal circular tanks

An exact two dimensional hydrodynamic analysis based on the linear potential theory is introduced to study the free liquid sloshing characteristics of transverse oscillation modes in a non-deformable horizontal circular cylindrical baffled container which is filled to an arbitrary depth with an inviscid incompressible liquid. Three common baffle configurations are considered: a pair of internal rigid horizontal side baffles of arbitrary extension installed at the free liquid surface, and a surface-piercing or a bottom-mounted vertical rigid baffle of arbitrary extension positioned along the tank vertical axis of symmetry. The problem solution is obtained by the method of successive conformal coordinate transformations, leading to standard truncated matrix eigenvalue problems on simple (rectangular) regions which are then solved numerically for the resonance eigen-frequencies. The effects of liquid fill level, baffle arrangement and length upon the three lowest antisymmetric and symmetric sloshing frequencies and the associated hydrodynamic pressure mode shapes are examined. Also, convergence of the adopted approach with respect to the fill condition, and baffle type/extension is discussed. Limiting cases are considered and the validity of results is established in comparison with the data in the existing literature.     

The junction of the eastern Central Asian Fold Belt and the Siberian Platform: deep structure and Mesozoic tectonics and geodynamics

The tectonic structure of the junction of the eastern Central Asian Fold Belt and the Siberian Platform, along with the deep structure of the Earth's crust and lithosphere in this region, has been described on the basis of new geological and geophysical data (seismic, geoelectric, and space-structural studies as well as new-generation geological maps), combined with new interpretation techniques (processing of the previous data by special software). The data suggest the existence of oblique collision during the convergence of the tectonic plates and, correspondingly, tectonic units composing these plates, when the Mongol–Okhotsk paleobasin closed. Such a scenario within the Aldan–Stanovoi Shield is evidenced by areas of syn- and postcollisional magmatism, with their deep-level and geochemical characteristics, and by the presence of a Late Mesozoic fold–thrust zone. Deep “traces” of these tectonomagmatic events, detected in the course of geological and geophysical modeling, are manifested in inclined deep boundaries between the crustal and lithospheric blocks. On the Earth's surface, they correspond to large fault systems: the Dzheltulak, North and South Tukuringra, Gulyui, and Stanovoi. It has been found that the influence of collision decreases northward with distance from the junction of the eastern Central Asian Fold Belt and the Siberian Platform (Dzheltulak and North Tukuringra transcrustal faults).     

变水深对畸形波及其时频能量谱的影响

使用VOF (volume of fluid)方法实现了变化水深条件下畸形波的数值模拟,使用小波分析方法计算模拟结果的时频能量谱,发现变化水深可以加强波浪的非线性相互作用,使转化到高频端的能量更多,产生了不对称程度更大的畸形波.     

Prediction of wave-induced scour depth under submarine pipelines using machine learning approach

The scour around submarine pipelines may influence their stability; therefore scour prediction is a very important issue in submarine pipeline design. Several investigations have been conducted to develop a relationship between wave-induced scour depth under pipelines and the governing parameters. However, existing formulas do not always yield accurate results due to the complexity of the scour phenomenon. Recently, machine learning approaches such as Artificial Neural Networks (ANNs) have been used to increase the accuracy of the scour depth prediction. Nevertheless, they are not as transparent and easy to use as conventional formulas. In this study, the wave-induced scour was studied in both clear water and live bed conditions using the M5’ model tree as a novel soft computing method. The M5’ model is more transparent and can provide understandable formulas. To develop the models, several dimensionless parameter, such as gap to diameter ratio, Keulegan-Carpenter number and Shields number were used. The results show that the M5’ models increase the accuracy of the scour prediction and that the Shields number is very important in the clear water condition. Overall, the results illustrate that the developed formulas could serve as a valuable tool for the prediction of wave-induced scour depth under both live bed and clear water conditions.     

A coupled-mode system with application to nonlinear water waves propagating in finite water depth and in variable bathymetry regions

A non-linear coupled-mode system of horizontal equations is presented, modelling the evolution of nonlinear water waves in finite depth over a general bottom topography. The vertical structure of the wave field is represented by means of a local-mode series expansion of the wave potential. This series contains the usual propagating and evanescent modes, plus two additional terms, the free-surface mode and the sloping-bottom mode, enabling to consistently treat the non-vertical end-conditions at the free-surface and the bottom boundaries. The present coupled-mode system fully accounts for the effects of non-linearity and dispersion, and the local-mode series exhibits fast convergence. Thus, a small number of modes (up to 5–6) are usually enough for precise numerical solution. In the present work, the coupled-mode system is applied to the numerical investigation of families of steady travelling wave solutions in constant depth, corresponding to a wide range of water depths, ranging from intermediate depth to shallow-water wave conditions, and its results are compared vs. Stokes and cnoidal wave theories, as well as with fully nonlinear Fourier methods. Furthermore, numerical results are presented for waves propagating over variable bathymetry regions and compared with nonlinear methods based on boundary integral formulation and experimental data, showing good agreement.     

Depth matters: Microbial eukaryote diversity and community structure in the eastern North Pacific revealed through environmental gene libraries

Protistan community structure was examined from 6 depths (1.5, 20, 42, 150, 500, 880 m) at a coastal ocean site in the San Pedro Channel, California. A total of 856 partial length 18S rDNA protistan sequences from the six clone libraries were analyzed to characterize diversity present at each depth. The sequences were grouped into a total of 259 Operational Taxonomic Units (OTUs) that were inferred using an automated OTU calling program that formed OTUs with approximately species-level distinction (95% sequence similarity). Most OTUs (194 out of 259) were observed at only one specific depth, and only two were present in clone libraries from all depths. OTUs were obtained from 21 major protistan taxonomic groups determined by their closest BLAST matches to identified protists in the NCBI database. Approximately 74% of the detected OTUs belonged to the Chromalveolates, with Group II alveolates making up the largest single group. Protistan assemblages at euphotic depths (1.5, 20 and 42 m) were characterized by the presence of clades that contained phototrophic species (stramenopiles, chlorophytes and haptophytes) as well as consumers (especially ciliates). Assemblages in the lower water column (150, 500 and 800 m) were distinct from communities at shallow depths because of strong contributions from taxa belonging to euglenozoans, acantharians, polycystines and Taxopodida (Sticholonche spp. and close relatives). Species richness (Chao I estimate) and diversity (Shannon index) were highest within the euphotic zone and at 150 m, and lowest for protistan assemblages located in the oxygen minimum zone (500 and 880 m). Multivariate analyses (Bray-Curtis coefficient) confirmed that protistan assemblage composition differed significantly when samples were grouped into shallow (≤150 m) and deep water assemblages (≥150 m).