Vegetation图像植被指数与实测水稻叶面积指数的关系

水稻的叶面积指数 (LAI)是水稻生长的一项重要参数 ,与水稻的生物量与产量直接相关。利用 1999年在江苏省江宁县实测的水稻叶面积指数与同期Vegetation/SPOT的植被指数作了对比分析 ,结果发现同期的LAI与植被指数表现相近的变化特征 ,两者具有良好的相关关系。     

DLT方法在遥感相机几何定标中的应用

为建立适用于遥感相机定标的实验室,需要有几何标定的算法和软件对摄影图像进行计算.使用近景摄影测量中基于3维控制场的定标方法,对单CCD四波段遥感相机进行了几何定标,研究并自主编程实现了直接线性变换DLT(Direct Linear Transformation)算法,与基于空间后方交会算法的定标结果进行了精度对比.结论...     

压力传感器受力的数值模拟分析

由于传感器与周围介质刚度不耦合的原因,埋入式压力传感器所测得读数并不是材料内部真正的受力状态。根据压力传感器的实际结构,采用有限元数值模拟分析方法,计算得出压力传感器的实际受力特征与应力分布规律,提出了压力传感器读数的修正方法,为压力传感器的正确使用提供理论依据和可靠的方法。     

PARASOL/POLDER3卫星数据的海洋上空云检测

在卫星海洋遥感中,云作为海气耦合系统最重要的调节器之一,其检测结果对海洋上空云微物理特性的反演精度有较大影响。因此,快速而准确识别海洋上空的云像元是卫星遥感数据处理过程中首要解决的关键问题。以PARASOL (Polarization and Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar)卫星搭载的POLDER3载荷遥感数据为研究对象,提出一种改进的海洋上空云检测方法。首先剔除海洋耀光;接着利用有云与晴空区近红外反射率差异检验识别有云像元,并利用偏振反射率检验进一步识别低反射率的云像元;然后利用近红外与可见光反射率比值检验识别晴空像元;最后建立多角度云检测结果空间融合规则,重新标记有云、晴空和未定像元。以印度洋海区为例进行实验分析,将云检测结果与Buriez方法进行对比,发现检测精度基本相当,而有云像元的识别速度却平均提高约3倍。结果表明:该方法能有效的检测出海洋上空的云像元,满足业务化数据处理的高精度及时效性要求,为后续云微物理特性反演提供可靠的数据源。     

一种基于空时联合约束的相对定位方法

为了降低机动环境对传感器网络自身定位的影响,提出了一种基于空时联合约束的相对定位(STRP)方法。Monte Carlo仿真表明,相对于STF技术,STRP方法降低了环境对定位的影响,自主导航定位的精度提高了36%。     

基于灵敏度分析的结构损伤识别中的传感器优化配置

本文提出了结构损伤识别中的传感器测点优化配置的方法。该方法是通过仅考虑结构刚度变化的结构特征灵敏度分析，以结构各自由度的损伤信息为条件，计算出结构的Fisher信息阵，并且考虑到Fisher信息阵的逆阵可能不存在，而将Fisher信息阵对应于每个自由度进行分解，通过计算每个分解的Fisher信息阵的迹而确定每个自由度含有的损伤信息的多少，从而从结构的全部自由度中去掉那些含损伤信息少的自由度。建立直接利用结构不完整的实测模态来定位结构的损伤，避免结构模态扩阶带来不必要的误差。最后，通过数值算例表明，该方法能有效地识别出结构的损伤。     

Use of an optical oxygen sensor to measure dissolved oxygen in seawater

The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method. The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the results with those of the titration method indicate that the sensor would be useful for fieldwork.     

Stability of Temperature and Conductivity Sensors of Argo Profiling Floats

After recalibration of the temperature and conductivity sensors of three Argo profiling floats recovered after operations for four to nine months, the results indicate that the floats basically showed no significant drift, either in temperature or salinity, and adequately fulfilled the accuracy requirement of the Argo project (0.005°C for temperature and 0.01 psu for salinity). Only the third float showed a significant offset in salinity of about −0.02 psu, as expected from comparison between the float data and the shipboard conductivity-temperature-depth data. This offset was caused by the operational error of the PROVOR-type float, in which the surface water was pumped immediately after the launch, fouling the conductivity sensor cell. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

考虑传感器故障的柔性航天器自适应积分滑模主动容错控制

针对考虑传感器故障的柔性航天器姿态系统,提出了一种主动容错控制方法.首先,通过对测量输出进行滤波,将传感器故障转化为执行器故障形式;接着,设计一个基于未知输入观测器的自适应故障估计观测器,对未知故障进行辨识,同时,采用了一个故障检测观测器,对故障的发生进行检测;然后,利用故障估计信号对系统输出进行调节,结合自适应积分滑模和线性矩阵不等式技术设计输出反馈容错控制器;最后,对所设计的主动容错控制方法进行仿真,验证了所提方法的有效性.