Evolution model and formation mechanism of bio-thermocatalytic transitional zone gas

As a new genetic type of natural gas exploration area, the bio-thermocatalytic transitional zone gas (BTTZG) has been highly stressed by geologists both at home and abroad. Systematic study on the generation mechanism of hydrocarbon at the transitional zone is presented. Based on simulating experiments and geochemistry analysis of the source rock with lower evolution, a hydrocarbon-forming model at the transitional zone has been established. The mechanism is proposed that under the condition of low temperature and pressure combining with extremely active structural stress and clay mineral catalysis, BTTZG is formed by de-group of soluble organic matter and polarized compositions through orthocarbon ion as well as by condensation polymerization of aromatic ring-rich insoluble organic matter. This mechanism controls the formation of BTTZG, and furthermore, BTTZG is the product of superimposition and interaction of all the factors mentioned above.     

高密度电法勘察岩土工程实例

利用岩土层间的导电性差异特性，使用由WDJD-1型主机与WDZJ-1多路电极转换器组成的高密度电法测量系统，按照不同的工程要求，采取不同的排列方式进行勘探，并用RES2DINV(演示版)高密度电阻率数据二维反演软件对所采集的数据处理解释，可实现对不同岩土层界面的划分。与常规电法相比，其方法手段更为先进，定性定量解释可靠，影像图件直观清晰。     

Seismic structural control using an electric servomotor active mass driver system

This study investigates an electric‐type active mass driver (AMD) system for structural vibration control. Composed primarily of an electric servomotor and a ball screw, the electrical AMD system is free from noise problems, oil leakage, and labor‐intensive maintenance that commonly are associated with hydraulic AMD systems. The desired stroke amplification of the mass and the power demand of the servomotor can be adjusted via the ball screw pitch, which in turn affects the effectiveness and efficiency of the system. Meanwhile, an instantaneous optimal direct output feedback control algorithm is adopted. Numerical simulation is performed using a five‐story steel frame as the object structure under the conditions of the 1940 El Centro earthquake. The AMD system proves to be effective and efficient within a certain range of the ball screw pitch. The reductions of the peak responses can reach as high as 70% if properly designed. Requiring only the velocity measurement of the top floor for on‐line feedback control, the proposed control algorithm is recommended for practical implementation. Copyright © 2004 John Wiley & Sons, Ltd.     

基于电场理论的主动防雷系统的初步设想

针对目前使用的传统雷电防护技术存在的问题，通过分析雷电原理和雷电触发机制，利用电场理论来设计一套主动防雷系统，即实现保护对象所在空间大气处于被激放电状态，并利用闪电将大气激活为自激放电状态。介绍了主动防雷系统的原理，并对其核心的“引而不发”理论进行阐述，在此基础上设计出主动防雷系统的模型。具体说明了构成主动防雷系统的阻塞系统、疏导系统和电源系统的构造和特征以及它们之间的关系。计算得到主动防雷系统所需的电场强度E=0．69kV／m。最后指出了存在问题与发展方向，在结论中总结了主动防雷系统的特点及其关键。     

高密度电法中的"异常扩展效应"及归位计算方法

对高密度电法勘探的异常扩展效应问题进行了较深人的分析；提出了利用相关分析进行归位计算的方法。通过对球体及板状体的Pole-Pole、Wanner-alpha装置的异常归位计算，表明该方法对复杂异常的解释具有效果。     

我国主要金矿类型中黄铁矿"电子-空穴心"特征及影响因素

通过对我国主要金矿类型中黄铁矿导电类型的分析表明，黄铁矿“电子。空穴心”与金矿床的成因类型具有密切的联系，华北地台太古代变基性火山岩中的金矿床(绿岩带型)、热水淋滤型(卡林型)金矿床，黄铁矿多为单一的“电子心”型导电。大多数产于中生代岩体中的中深脉状金矿、火山次火山岩中的金矿床，黄铁矿为“电子心”、“空穴心”混合型导电，个别的为单一的“空穴心”导电。黄铁矿的“电子．空穴心”受杂质成分As、Co、Nl在成矿背景中的丰度，进入黄铁矿品格中的替代能力的差异、补偿类质同象现象、成矿时温度以及．f(S2)等多种因素的耦合制约。     

祁连山区天然草原退化原因分析与可持续利用对策

天然草原是畜牧业发展的重要物质基础，由于缺乏有效的制度安排和技术创新，人类无节制的赢利活动加剧了草原退化，导致了西部生态环境的恶化。论文以祁连山区的肃南县为例，通过对天然草原退化现状的调查研究，剖析了祁连山区草原生态环境保护与经济发展之间的突出问题和草原退化的深层原因，提出了天然草原永续利用的对策。     

Changes in soil organic carbon and other physical soil properties along adjacent Mediterranean forest, grassland, and cropland ecosystems in Turkey

Cultivation, overgrazing, and overharvesting are seriously degrading forest and grassland ecosystems in the Taurus Mountains of the southern Mediterranean region of Turkey. This study investigated the effects of changes on soil organic carbon (SOC) content and other physical soil properties over a 12-year period in three adjacent ecosystems in a Mediterranean plateau. The ecosystems were cropland (converted from grasslands in 1990), open forest, and grassland. Soil samples from two depths, 0–10 and 10–20 cm, were collected for chemical and physical analyses at each of cropland, open forest, and grassland ecosystems. SOC pools at the 0–20 cm depth of cropland, forest, and grassland ecosystems were estimated at 32,636, 56,480, and 57,317 kg ha⁻¹, respectively. Conversion of grassland into cropland during the 12-year period increased the bulk density by 10.5% and soil erodibility by 46.2%; it decreased SOM by 48.8%, SOC content by 43%, available water capacity (AWC) by 30.5%, and total porosity by 9.1% for the 0–20 cm soil depth (p<0.001). The correlation matrix revealed that SOC content was positively correlated with AWC, total porosity, mean weight diameter (MWD), forest, and grassland, and negatively with bulk density, pH, soil erodibility factor, and cropland. The multiple regression (MLR) models indicated that any two of the three ecosystems and one of the two soil depths accounted for 86.5% of variation in mean SOC values ((p<0.001).     

Signatures in flowing fluid electric conductivity logs

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.     

宁东煤田枣泉矿井综合物探效果

为探明宁东煤田枣泉矿井首采区煤层自然范围及充水性，根据采区内地球物理物征，采用高精度磁法，直流电测深法和激发极化法进行综合勘探。在磁法勘探中结合测区曲线特征，建立数据体模型，正演计算烧变岩边界；电法勘探利用烧变岩含水后电阻率降低的特征确定其含水范围及富水性。