Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

冻土路基表面的融化指数与冻结指数

在冻土层之上筑路，由于会改变地-气界面的热物理特性，进而影响冻土层的热力→动力稳定性，故而修筑一定高度的路基成为保护冻土层所采取的一种常规措施．在修筑路基之后，与路基边坡的朝向有关的热效应是冻土路基工程保护措施必须考虑的问题．在数理分析与数值模拟分析的基础上，给出了可根据气温的年最大和最小月平均值计算路基表面的融化指数与冻结指数以及有关热状况参数的方法，并以青藏铁路北麓河段2002年为例进行了计算分析．实例分析表明，即便是没有修筑道路，北麓河地区的冻土也已经处于临界状态；路基相对的两个坡面，由于朝向不同会造成温度分布的强非均匀性，其中南和偏南方向与北和偏北方向的路基坡面热状况差异最大，有必要对路基相对的两个坡面采用不同的防护措施，一方面改善就地取土修筑路基对其下伏冻土层的直接不良影响，同时也尽可能减小路基表面温度分布的非均匀性，以避免纵向裂缝的发生。     

时间谱电阻率法中的剩余电磁效应研究

根据频谱激电（SIP）法或复电阻率（CR）法中研究剩余电磁（REM）效应的思想，通过分析时间谱电阻率（TSR）法中场的基本特征，在TSR法中建立了与SIP（或CR）法中参数Φmax/Φ0max相类似的参数－Emax/E0，用来描述了TSR法中的REM效应。通过对一维可极化大地模型的REM效应的理论计算，验证了用Emax/E0表示的REM异常可用来形象地反映地电断面电阻率的高低。     

给定内插高程异常值的精度时对GPS水准网格间距的考虑

在已布设GPS水准网的地区，若需内插其中任意一点的高程异常值时，应该了解该内插值的精度。导出了该内插点高程异常值的精度评定方法，并具体给出在我国C级GPS水准网中，该内插点高程异常推估值精度和该地区的地形和栅格重力异常分辨率的数学关系式和实例。在给定内插点高程异常值精度的局域大地水准面时，按不同地形和栅格重力异常分辨率的密度，根据这些数学关系式，可以设计间距合理的B级或C级GPS水准网。     

基于GIS的土壤质量评价研究

介绍了基于GIS土壤质量等级评价的实现过程。探讨了土壤等级评价因子的选择和因子权重的确定方法。在分析了几种常用方法在土壤质量评价中的应用特点并指出几种方法的局限性之后，提出了顾及因子稳定性的多元线性回归分析法，并以南方某地为例进行了实例分析。     

一种新的多通道GPS共视资料的处理算法

提出了一种按仰角加权的多通道GPS共视资料处理算法，充分利用了所有观测数据，同时抑制了多径等因素影响，从而可提高共视比对精度。对日本邮政省通讯研究所(CRL)和国家授时中心(NTSC)2002年5月～2003年3月的多通道共视比对的处理结果表明，新的处理算法结果更接近真实钟差。     

测量误差与测量不确定度表述方法的研究

研究了国家计量技术规范－－《测量不确定度评定与表示》（JJF1059－1999）与测量数据处理的误差理论的区别与联系。讨论了如何依照JJF1059－1999的规定，完整、准确地评价和描述测量结果。     

地面沉陷对路基的破坏影响及其防治技术

根据地下资源开发地区岩层与地表移动机理，研究了地面沉陷时路基产生的破坏影响，分析、总结了路基沉陷特征，给出了确定路基和矿柱强度及稳定性的验算方法，以及路基出现坍塌或滑坡等灾害事故的评估方法，提出了地面沉陷区路基防治技术，并列举了治理路基沉陷的例子。     

平板载荷试验应思考的几个问题

提出了平板载荷试验中的几个问题:(1)复合地基平板载荷试验垫层的重要性;(2)复合地基平板载荷试验存在尺寸效应;(3)单墩或单桩平板载荷试验不完善。重点对目前广泛使用的复合地基荷载试验进行了讨论,以引起检测人员注意。