A Coupled Riverine-Marine Fractionation Model for Dissolved Rare Earths and Yttrium

Fractionation of yttrium (Y) and the rare earth elements (REEs) begins in riverine systems and continues in estuaries and the ocean. Models of yttrium and rare earth (YREE) distributions in seawater must therefore consider the fractionation of these elements in both marine and riverine systems. In this work we develop a coupled riverine/marine fractionation model for dissolved rare earths and yttrium, and apply this model to calculations of marine YREE fractionation for a simple two-box (riverine/marine) geochemical system. Shale-normalized YREE concentrations in seawater can be expressed in terms of fractionation factors ( _ij ) appropriate to riverine environments ( ) and seawater ( ):

在97.8GHz处测量地球大气的不透明度

用研制的全自动辐射计在97．8GHz上测量南京市内大气的不透明度以及这种不透明度随时间的变化．辐射计记录大气在不同天顶高度的辐射温度,由此测出天顶方向的大气不透明度。在56小时的测量时间内,取得了1400多组数据,拟合得到了在观测时段内天顶方向的大气不透明度在0．2至0．7之间,典型值为0．4,表明测试地点的大气条件允许进行3mm波段的射电天文观测．由于在工作频段内大气不透明度的主要来源是对流层水汽的吸收,测量的不透明度可用来直接反映大气内水汽的含量,并实时校准大气吸收．     

海尔—波普彗星的CO（J=1—0）谱线的观测

使用紫金山天文台青海观测站13．7米毫米波射电望远镜,于1996年12月10日至1997年1月2日和1997年3月25日至1997年4月4日对海尔－波普彗星的CO分子J＝1—0转动跃迁谱线（频率为115．27120GHz）进行了观测．观测谱线表明,CO分子相对于地心的速度比彗星整体相对于地心的速度要小些,即有蓝移现象．这反映了CO分子是由该彗星迎着太阳的面以一定的速度产生出来的．从观测谱线中还初步估算了该彗星CO分子的产生速率．     

Analysis of Error Caused by Replacing Spherical Shell with an Elastic Plate Model in Studying Bending Deformation of the Lithosphere

ＩＮＴＲＯＤＵＣＴＩＯＮＶｅｎｉｎｇＭｅｉｎｅｓｚ（１９４１）ｕｓｅｄｅａｒｌｉｅｒａｎａｐｐｒｏｘｉｍａｔｅｓｏｌｕ－ｔｉｏｎｆｏｒｔｈｅｅｑｕａｔｉｏｎｏｆｂｅｎｄｉｎｇｏｆｅｌａｓｔｉｃｔｈｉｎｐｌａｔｅｓｔｏｃａｌｃｕ－ｌａｔｅｔｈｅｖａｒｉ...     

南京伏牛山铜矿脉状矽卡岩稀土元素地球化学特征

介绍了南京伏牛山铜矿与成矿有关的花岗闪长斑岩及脉状矽卡岩的稀土元素组成模式及稀土元素地球化学特征。并据两者的相似性及变异性特征,探讨了脉状矽卡岩的成因。     

NEAR-FAULT DISPLACEMENT AND DEFORMATION OBTAINED FROM ONE-KILOMETER-LONG FAULT-CROSSING BASELINE MEASUREMENTS-A PRELIMINARY EXPERIMENT AT 2 SITES ON THE EASTERN BOUNDARY OF THE SICHUAN-YUNNAN BLOCK

The current and conventional fault-crossing short baseline measurement has a relatively high precision, but its measurement arrays usually fail to or cannot completely span major active fault zones due to the short length of the baselines, which are only tens to 100 meters. GNSS measurement has relatively low resolution on near-fault deformation and hence is not suitable for monitoring those faults with low motion and deformation rates, due to sparse stations and relatively low accuracy of the GNSS observation. We recently built up two experimental sites on the eastern boundary of the active Sichuan-Yunnan block, one crossing the Daqing section of the Zemuhe Fault and the other crossing the Longshu section of the Zhaotong Fault, aiming to test the measurement of near-fault motion and deformation by using fault-crossing arrays of one-kilometer-long baselines. In this paper, from a three-year-long data set we firstly introduce the selection of the sites and the methods of the measurement. We then calculate and analyze the near-field displacement and strain of the two sites by using three hypothetical models, the rigid body, elastic and composed models, proposed by previous researchers. In the rigid body model, we assume that an observed fault is located between two rigid blocks and the observed variances in baseline lengths result from the relative motion of the blocks. In the elastic model, we assume that a fault deforms uniformly within the fault zone over which a baseline array spans, and in the array baselines in different directions may play roles as strainmeters whose observations allow us to calculate three components of near-fault horizontal strain. In the composed model, we assume that both displacement and strain are accumulated within the fault zone that a baseline array spans, and both contribute to the observed variances in baseline lengths. Our results show that, from the rigid body model, variations in horizontal fault-parallel displacement component of the Zemuhe Fault at the Daqing site fluctuate within 3mm without obvious tendencies. The displacement variation in the fault-normal component keeps dropping in 2015 and 2016 with a cumulative decrease of 6mm, reflecting transverse horizontal compression, and it turns to rise slightly(suggesting extension)in 2017. From the elastic model, the variation in horizontal fault-normal strain component of the fault at Daqing shows mainly compression, with an annual variation close to 10^-5, and variations in the other two strain components are at the order of 10^-6. For the Longshu Fault, the rigid-body displacement of the fault varies totally within a few millimeters, but shows a dextral strike-slip tendency that is consistent with the fault motion known from geological investigation, and the observed dextral-slip rate is about 0.7mm/a on average. The fault-parallel strain component of the Longshu Fault is compressional within 2×10^-6, and the fault-normal strain component is mainly extensional. Restricted by the assumption of rigid-body model, we have to ignore homolateral deformation on either side of an observed fault and attribute such deformation to the fault displacement, resulting in an upper limit estimate of the fault displacement. The elastic model emphasizes more the deformation on an observed fault zone and may give us information about localizations of near-fault strain. The results of the two sites from the composed model suggest that it needs caution when using this model due to that big uncertainty would be introduced in solving relevant equations. Level surveying has also been carried out at the meantime at the two sites. The leveling series of the Daqing site fluctuates within 4mm and shows no tendency, meaning little vertical component of fault motion has been observed at this site; while, from the rigid-body model, the fault-normal motion shows transverse-horizontal compression of up to 6mm, indicating that the motion of the Zemuhe Fault at Daqing is dominantly horizontal. The leveling series of the Longshu site shows a variation with amplitude comparable with that observed from the baseline series here, suggesting a minor component of thrust faulting; while the baseline series of the same site do not present tendencies of fault-normal displacement. Since the steep-dip faults at the two sites are dominantly strike-slip in geological time scale, we ignore probable vertical movement temporarily. In addition, lengths of homolateral baselines on either side of the faults change somewhat over time, and this makes us consider the existence of minor faults on either side of the main faults. These probable minor faults may not reach to the surface and have not been identified through geological mapping; they might result in the observed variances in lengths of homolateral baselines, fortunately such variations are small relative to those in fault-crossing baselines. In summary, the fault-crossing measurement using arrays with one-kilometer-long baselines provides us information about near-fault movement and strain, and has a slightly higher resolution relative to current GNSS observation at similar time and space scales, and therefore this geodetic technology will be used until GNSS networks with dense near-fault stations are available in the future.     

低温对玉米种子发芽的影响

通过发芽试验研究了东北地区早、中、晚熟３个玉米品种在４℃、８℃、１３℃、１７℃、２１℃和２５℃黑暗条件下的发芽率、发芽势和发芽指数;并求出不同品种的发芽临界温度。结果表明,低温抑制了种子发芽,降低了发芽能力;３个品种发芽的临界温度为３．２￣５．２℃。发芽临界温度愈低,种子的耐低温发芽能力愈强。稀土浸种有提高玉米种子发芽率和促进发芽的作用。     

�ŷ嶯����ز�������ʵ��վ������������

??10???????FG5-112?????????????й???????????????????о?????嶯??????????????????????68??????????ι????????????С??2??10 ^-8 ms ^-2???????????????????????С?????????????;????????????????????????????????????仯?????1??10 ^-8 ms ^-2 /a??????????λ???????-0.38 cm/a;??????????λ?仯??????????????????????????????     

贵州织金地区稀土磷块岩矿床中稀土元素赋存状态

以稀土磷块岩矿床为研究对象,采用电感耦合等离子体光谱法和质谱法研究了3个代表性样品的基本化学组成,分析了40多个元素的含量,确定了矿物质量分数和赋存状态,研究了稀土元素在其中的分布特征。结果表明,97%以上的稀土元素呈类质同象状态部分置换磷灰石晶格中的Ca2 存在,只有小于3%的稀土元素呈被粘土质等吸附状态或离子交换(吸附)状态存在。     

山东地壳运动GPS观测网的建设与初步结果分析

简述山东地壳运动GPS观测网的建设和数据处理的基本方法，并对系统所得的初步结果进行分析，分析表明，该系统可产出连续、高精度的GPS基准站三维坐标及基线数据，可为地震监测和地壳运动的科学研究提供良好的GPS数据素材。