Simulations of Annual Cycle of Phytoplankton Production and the Utilization of Nitrogen in the Yellow Sea

A nutrient dynamic model coupled with a 3D physical model has been developed to study the annual cycle of phytoplankton production in the Yellow Sea. The biological model involves interactions between inorganic nitrogen (nitrate and ammonium), phosphate and phytoplankton biomass. The model successfully reproduces the main features of phytoplankton-nutrient variation and dynamics of production. 1. The well-mixed coastal water is characterized by high primary production, as well as high new production. 2. In summer, the convergence of tidal front is an important hydrodynamic process, which contributes to high biomass at frontal areas. 3. The evolution of phytoplankton blooms and thermocline in the central region demonstrate that mixing is a dominant factor to the production in the Yellow Sea. In this simulation, nitrate- and ammonium-based productions are estimated regionally and temporally. The northern Yellow Sea is one of the highly ranked regions in the Yellow Sea for the capability of fixing carbon and nitrogen. The annual averaged f-ratio of 0.37 indicates that regenerated production prevails over the Yellow Sea. The result also shows that phosphate is the major nutrient, limiting phytoplankton growth throughout the year and it can be an indicator to predict the bloom magnitude. Finally, the relative roles of external nutrient sources have been evaluated, and benthic fluxes might play a significant role in compensating 54.6% of new nitrogen for new production consumption.     

Relative molar mass distributions of chromophoric colloidal organic matter in coastal seawater determined by Flow Field-Flow Fractionation with UV absorbance and fluorescence detection

A new method for the characterization of chromophoric colloidal organic matter in seawater has been applied to samples from the Baltic Sea, Kattegatt and Skagerrak seas. Size fractionation of the sample by Flow Field-Flow Fractionation and measurement of the fluorescent and UV absorbing properties of the individual size fractions result in a relative molar mass distribution (RMM) of the optical properties. The RMM distributions have been used to estimate number and weight average relative molar masses, and polydispersity indices. At least two sources of coloured organic matter were identified from the ratio of fluorescence to UV: the Baltic surface water and the Skagerrak deep water. The dominating processes were mixing and dilution, but processes such as photo bleaching of fluorescence are also believed to be important. The RMM distribution derived from UV detection (1150–1300 Dalton) increased with increasing salinity while that derived for fluorescence (1500–1250 Dalton) decreased with increasing salinity. The specific UV absorbance taken as a proxy of the aromaticity of the chromophoric organic material showed decreasing trend with both increasing salinity and increasing UV derived weight average relative molar mass. Increasing polydispersity of the colloidal material was also observed as a function of salinity.     

海水钝顶螺旋藻富硒及其含硒藻蓝蛋白的研究

研究了亚硒酸钠梯度浓度对海水钝顶螺旋藻Spirulina platensis生长及藻胆蛋白含量的影响,对含硒藻蓝蛋白进行分离纯化,得到含硒藻蓝蛋白纯品。结果表明,硒添加浓度小于100mg.L-1时,对藻体生长有一定的促进作用,其生物量、藻蓝蛋白和别藻蓝蛋白含量有增加,藻体硒含量及富硒系数明显高于文献报道的相似条件下的淡水螺旋藻;纯化的含硒藻蓝蛋白溶液在弱光照、低温、pH4—8的范围内稳定性较好;含硒藻蓝蛋白的光谱特性与藻蓝蛋白相比几乎没有差异,紫外与可见光吸收光谱特征吸收峰在280nm和620nm,荧光激发峰在558nm,室温条件下最大荧光发射峰在655nm,说明海水钝顶螺旋藻富集硒后及海水的胁迫对其藻蓝蛋白的光谱特性没有明显影响。     

基于ABAQUS的深水连接器连接性能分析

为解决现有深水连接器连接性能研究中力学分析建模不准确,且缺乏抗弯抗扭能力分析的问题,基于ABAQUS有限元分析软件对深水连接器进行三维模型动态仿真分析,对连接器的受力、密封性能以及在实际工程需求中不同内压下的抗弯及抗扭性能进行深入研究。结果表明:在安装及生产两种工况下,深水连接器各部件除密封环外受力均满足其强度设计要求,密封环接触表面发生合理塑性变形,满足密封要求;随着内压的增加,深水连接器的抗弯能力逐渐下降,抗扭能力则呈现增加的趋势;极限弯矩分别在0 MPa与35 MPa内压下的判定依据为密封失效,在14 MPa与52 MPa内压下的判定依据为下毂座屈服,而极限扭矩在不同内压下的判定依据均为密封失效。     

大菱鲆体重和主要体型比率性状的遗传动态分析

The objective of this study was to estimate genetic parameters of body width(BW)to body length(BL)ratio(BW/BL)and of body weight traits(BWT)in turbot,and to elucidate the genetic mechanism of the two traits during ontogeny by dynamic genetic analysis.From 3 to 27 months,BW,BL and BWT of each communally stocked fish were measured every 3 months.The BW/BL ratio was measured at different sampling ages.A twotrait animal model was used for genetic evaluation of traits.The results showed that the heritability values of BW/BL ratio ranged from 0.2168 to 0.3148,corresponding to moderate heritability.The BWT heritability values ranged from 0.2702 to 0.3479 corresponding to moderate heritability.The heritability of BW/BL ratio was lower than that of BWT,except at 3 months of age.Genetic correlation between BW/BL ratio and BWT decreased throughout the measurement period.Genetic correlations were higher than the phenotypic correlations.The current results for estimating genetic parameters demonstrate that the BW/BL ratio could be used as a phenotypic marker of fast-growing turbot,and the BW/BL ratio and BWT could be improved simultaneously through selective breeding.     

导管架平台拆除过程稳定性及影响因素分析

现有服役海洋平台正逐步走向老龄化,海洋平台拆除成为海洋工程新的经济增长点。针对达到服役年限的导管架平台,基于数值分析方法模拟拆除过程,开展平台在不同拆除阶段和环境载荷等参数下的稳定性及影响规律研究。基于钢结构整体稳定性理论,以导管架平台拆除过程中顶点位移为参考,定义导管架平台拆除作业稳定性指标,提出拆除作业阶段划分方法,通过分析导管架平台在不同影响因素作用下拆除过程稳定性响应,给出拆除作业建议。选取我国南海某4裙12腿进行实例分析,结果表明:主桩腿对导管架平台起决定性承载作用,拆除部分主桩腿后需要引入外部支撑力,以保证拆除作业安全进行;拆除构件越多,来浪方向和环境载荷大小对平台影响越加显著。研究结果可为导管架平台拆除作业提供参考。     

钢筋混凝土梁结构断裂损伤诊断方法

提出一种基于BP神经网络的结构破损诊断方法,该方法以结构破损前后柔度的变化作为破损诊断网络输入,为了解决由于系统响应样本数据空间分布不均匀对网络收敛速度及网络诊断影响问题,对网络训练样本采用广义空间格点进行了交换,模拟算例及应用实例均表明,本文方法能准确诊断结构破损位置与破坏程度,是一种有效的结构破损诊断方法.     

水下拖曳系统运动姿态仿真研究

采用凝集参数法建立了水下拖曳系统的三维离散模型,该模型由一系列的质量点和不计重量的弹簧组成.采用数学模型编程对NCEL浮球实验和四个典型拖曳系统进行了仿真计算.计算结果表明此数学模型具有一定的理论意义和工程实用价值.     

光通信用IOGHzCMOS八分频器设计

在比较反转触发器（TFF）的各种结构基础上,采用一种单时钟信号控制,实现高速分频的电路结构,设计实现了用于光通信中时钟数据恢复电路的八分频器。该八分频器使用动态负载,输出两路互补信号,采用SMIC0．18um1P6MCMOS工艺,使用Cadence公司的Spectre仿真器进行模拟验证,实验结果证明,在电源电压为1．8V的情况下,该八分频器的工作速度10GHz、功耗仅为4．705mW。     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.