Preliminary study on variation characteristics of ocean tide dynamic stress in crust and its relationship with earthquakes

~~Preliminary study on variation characteristics of ocean tide dynamic stress in crust and its relationship with earthquakes@陆明勇$China Center for Earthquake Disaster Emergency and SAR,Beijing 100049,China @郑文衡$Huazhong University of Science and Technology,Wuhan 430074,China①Strong earthquake catalogues in China. Earthquake catalogues reported monthly by Center for Analysis and Prediction, CEA. ①YI Zhi-gang. Institute of Crustal Dynamics, China Earthquake Administrati…     

The influence of particle composition on thorium scavenging in the NE Atlantic ocean (POMME experiment)

²³⁰Th, ²³²Th and ²³⁴Th were analyzed in sinking particles collected by moored and drifting sediment traps in the NE Atlantic Ocean (POMME experiment) in order to constrain the phase(s) carrying Th isotopes in the water column. It reveals a contrasted behaviour between ²³⁴Th and ²³⁰Th. ²³⁴Th is correlated to the particulate organic carbon suggesting that it is primarily scavenged by organic compounds in the surface waters. ²³⁰Th_xs is correlated with Mn, Ba and the lithogenic fraction that are enriched in small suspended particles and incorporated in the sinking particulate flux throughout the water column. The lack of correlation between ²³⁰Th_xs and CaCO₃ or biogenic silica (bSi) indicates that CaCO₃ and bSi are not responsible for ²³⁰Th scavenging in the deep waters of this oceanic region. ²³⁰Th is generally correlated with the lithogenic content of the trapped material but this correlation disappears in winter during strong atmospheric dust inputs suggesting that lithogenic matter is not directly responsible for ²³⁰Th scavenging in the deep waters or that sufficient time is required to achieve particle–solution equilibration. MnO₂ could be the prevalent ²³⁰Th_xs-bearing phase. The narrow range of K_{d_MnO2}^Th obtained for very contrasted oceanic environments supports a global control of ²³⁰Th_xs scavenging by MnO₂ and raises the possibility that the ²³⁰Th–²³¹Pa fractionation is controlled by the amount of colloidal MnO₂ in seawater.     

A comparative study of concentrated plasticity models in dynamic analysis of building structures

Concentrated plasticity (CP) models are frequently used in static and dynamic building analysis and have been implemented in available commercial software. This investigation deals with three different CP‐models, a simplified macroelement model (SEM) for a complete building story, a frame element with elasto‐plastic interaction hinges (PH), and a frame element with fiber hinges (FB). The objectives of this work are to evaluate the quality of the earthquake responses predicted by these models and to identify important aspects of their implementation and limitations for their use in dynamic analysis. The three elements are tested in a single‐story asymmetric plan building and in a three‐story steel building. Results show that base shear and global response values are usually computed with better accuracy than interstory deformations and local responses. Besides, the main limitation of elasto‐plastic CP models is to control the displacement offsets that result from perfect elasto‐plastic behavior. On the other hand, calibration of the SEM‐model shows that global responses in steel structures may be computed within 20% error in the mean at a computational cost two orders of magnitude smaller than that of the other CP elements considered. However, the three element models considered lead to increasing levels of accuracy in the dynamic response and their use depends on the refinement of the analysis performed. Copyright © 2005 John Wiley & Sons, Ltd.     

Pseudo‐dynamic seismic response of reinforced concrete frames infilled with non‐structural brick masonry

This paper presents pseudo‐dynamic test results on the in‐plane seismic behaviour of infilled frames. Thirteen single‐storey, single‐bay, half‐size‐scale, reinforced concrete‐frame specimens, most of which infilled with non‐structural masonry made of perforated bricks and cement mortar are tested. The infills are in contact with frames, without any connector; openings are not covered. The frames are different in their strength and details, reinforcement grade, and aspect ratio. Seismic input is the 1976 Tolmezzo (Friuli, Italy) ground acceleration, to which specimens are subjected two times: virgin and damaged by the previous test. The global seismic response of initially virgin infilled specimens considerably differs from that of bare specimens. This follows a dramatic change of properties: compared to a bare frame, the initial stiffness increases by one order of magnitude, and the peak strength more than doubles. The peak drift lessens; however, the displacement ductility demand does not. The energy demand is greater. Nevertheless, the influence of infill decreases as damage proceeds. Displacement time histories of damaged specimens are quite similar. At the local level, infill causes asymmetry and concentration of the frame deformation. Copyright © 2005 John Wiley & Sons, Ltd.     

A practical method for estimating dynamic soil stiffness on surface of multi‐layered soil

It is important to estimate the influence of layered soil in soil–structure interaction analyses. Although a great number of investigations have been carried out on this subject, there are very few practical methods that do not require complex calculations. In this paper, a simple and practical method for estimating the horizontal dynamic stiffness of a rigid foundation on the surface of multi‐layered soil is proposed. In this method, waves propagating in the soil are traced using the conception of the cone model, and the impulse response function can be calculated directly and easily in the time domain with a good degree of accuracy. The characteristics of the impedance, that is the transformed value to the frequency domain of the obtained impulse response, are studied using two‐ to four‐layered soil models. The cause of the fluctuation of impedance is expressed clearly from its relation to reflected waves from the lower layer boundary in the model. Copyright © 2005 John Wiley & Sons, Ltd.     

Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.     

三峡水库区巫山新县城库岸综合治理设计回顾

三峡水库区巫山新县域库岸综合治理工程范围内涉及到滑坡、泥石流、塌岸等多种地质灾害。治理工程综合运用了多种技术与结构措拖，工程的复杂性和典型性在整个三峡库区具有极强的代表意义。笔者对整个治理方案的布置情况进行了归纳总结，并以翔实的第一手资料对治理工程设计过程中出现的几种典型问题一一进行了分析与论述．提出了相应的解决方案与合理化建议。结论认为，库岸综合治理工作，必须根据不同的地形特征，结合城区总体布局及沿线市政工程建设，综合考虑，有机结合，做到治理和利用相结合，最大限度地改善新城建设用地环境和城市生态环境。设计人员必须依照现场实际条件进行动态设计，确保工程方案合理、可靠、经济。文中讨论的问题和实践经检对同类工程具有一定的借鉴意义。     

空间信息网格中动态复制策略的研究

空间信息网格项目数据量大，用户遍及各地，对数据文件的请求延时大、占大量带宽。复制可以节省带宽、减少时延、均衡负载、改善系统可靠性。采用动态复制技术可以使用户有效地获得所需的数据。详细地论述了动态复制策略以及空间信息网格中的复制管理机制、复制服务流程和具体实施。     

基于"3S"技术的于田绿洲湿地动态变化研究

以极端干旱区典型绿洲———于田绿洲为研究区,采用遥感(RS)、地理信息系统(GIS)和全球定位系统(GPS)相结合的方法,进行了湿地资源调查,查明了于田绿洲湿地类型、区域分布及面积,应用模型和分形理论,探讨了于田绿洲湿地的动态变化特征,并分析了其发生动态变化的原因。研究结果对于干旱区绿洲湿地的合理开发和可持续发展有着重要现实意义。