Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

基于GIS和SD方法的社会经济发展与生态环境响应动态模拟预测研究

在着重于空间现象分析处理的GIS与动态模拟的SD方法结合的模式下，动态模拟预测了不同社会经济发展策略对生态环境的影响，揭示了生态经济系统社会经济发展与生态环境相互影响关系，为区域可持续发展提供决策支持服务。     

虚拟加工环境中的工件动态建模方法研究

提出并实现了基于平面纹理映射的基元立方体构造方法，以之为动态结点建立了动态八叉树结构，实现了支持变精度动态建模的自相似递归算法。该算法确保离正在加工的部位更近的区域有更高的精度，并采用C^ Builder和OpenGL构造了一个集成于虚拟加工环境的可加工工件模型。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

Flood Damage Reduction Program (FDRP) in Québec: Case Study of the Chaudiére River

This study presents the evolution of agreements between the governments of Canadaand Québec on flood damage reduction. In Québec, the implementation of a regulation about building in floodplains came about in 1983–1984. Today, this regulation takes the form of a policy called ``Policy of shores, littoral and floodplain protection'. Municipalities must adopt rules that concur with the principles of this policy.The Chaudiére River basin was selected for analysis of urban developmentduring the period following the application of building rules in flood-risk areas.Despite the ban on building in the strong current zone (0–20 year return periodflood zone), many buildings, essentially residential, have been erected in thiszone. These new constructions generally account for a low percentage of thetotal property value in the 0–100 year flooding area, but are legal since theyare connected to a water and sewage network that existed prior to the officialfloodplain regulation.Flood damage along the Chaudiére River will tend to increase for two reasons.Firstly, while respecting the policy mentioned above, sites are still available infloodplains for future development. Secondly, no structural flood protection workshave been erected in view of the fact they are only marginally profitable from anbenefit-cost point of view.     

粗粒料流变研究的现状与展望

粗粒料是土石坝的主要填料,高土石坝的流变已成为坝工专家和工程师广为关注的问题,其流变特性是研究的基础。分析了粗粒料流变研究的现状,介绍了长江科学院新取得的进展,并对粗粒料流变研究的前景提出了展望。     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.