东昆仑东段东昆中构造带韧性剪切作用及其地质意义

东昆仑东段东昆中构造带经历了多期(次)构造事件,现今保留了复杂多样的构造样式。哈图沟、清水泉—塔妥和沟里等地区构造变形十分强烈,且发育有呈NWW-SEE展布的韧性剪切带。通过野外调研及显微构造研究,对东昆中构造带几何学、运动学及动力学等进行了分析,并通过费氏台和EBSD技术对其进行石英C轴组构分析后认为该剪切带为一压-扭性构造界面,且早期为左旋逆冲,晚期为右旋走滑,变形温度为400~550℃。对剪切带内的石英亚颗粒及动态重结晶粒度测量计算出研究区内韧性剪切带古应力值约为153.791 MPa。哈图沟牦牛山组变形砾岩(4个测点)有限应变测量结果显示,越靠近东昆中断裂带砾石Flinn指数、应变程度、罗德系数(绝对值)越大,且Flinn指数均大于1,属拉伸变形。结合区域地质资料,认为东昆仑东段东昆中韧性剪切带形成于晚海西—印支期。     

福清沙浦——平潭马腿推覆型韧性剪切带基本特征

福清沙浦－－平潭马腿推覆型性剪切带位于福建东南沿海褶皱变质带的北段，在“三山、平潭、高山、观音澳”幅１：５万区调工作中，我们首次发现并肯定了该推覆型韧性剪切带的存在，并作了详细的工作。     

韧性剪切带糜棱岩类质量平衡分析——以豫西秦岭群蛇尾剪切带为例

蛇尾剪切带中糜棱岩的质量平衡分析表明:(1)以Al_2O_3守恒为限制条件,该剪切带损失了10％土的质量和体积,糜棱岩类有Na_2O,Zr,Sr的获得;SiO_2,TiO_2,FeO,Fe_2O_3,MgO,MnO,CaO,K_2O及Co,Ni,V,Cr,Cu,Y则损失了;(2)从初糜棱岩-糜棱岩,初糜棱岩-超糜棱岩和糜棱岩-超糜棱岩得出的质量等比线显示,糜棱岩类之间没有明显的质量和体积损失。糜棱岩组分的得失主要发生在初糜棱岩阶段,同初糜棱岩相比,糜棱岩、超糜棱岩有CaO的获得,FeO,MgO,TiO_2,Cr,Co,V,Y微弱的获得,Na_2O则有轻微的损失。     

韧性剪切作用动力学及控矿作用研究进展

韧性剪切作用动力学主要是变形宏观,微观及超微构造进行分析,研究变形机制和环境（温度,压力,深度等）差异流动应力大小,应变速率,古应力方位,剪切构造动力学演化及其对金矿的控制作用等。韧性剪切成矿与控矿作用动力这主要表现对在成矿流体的形成与运移,金的活化与搬运,金的沉淀富集等产生重要影响。     

四川冕宁金林金矿地质特征及找矿前景

金林金矿位于冕西韧性剪切带的东带。矿体赋存在燕山期变质流纹斑岩、霏细岩中。矿体受北东向断层破碎带控制，含金石英脉充填在由主断裂派生的北东、北西、近东西向三组裂隙中。该矿床属岩浆期后中一低温热液充填一交代石英脉型金矿床。矿区及其外围成矿地质条件良好，通过进一步工作可望找到较大的金矿床。     

新疆额尔齐斯金矿带构造控矿规律研究

额尔齐斯金矿带位于新疆阿尔泰南缘。地质研究表明,发生于晚石炭世—早二叠世的金成矿作用在整个额尔齐斯金矿带中广泛发育,明显受额尔齐斯韧性剪切带及其次级断裂的控制。通过对额尔齐斯构造带及其中发育的21个金矿床(点)尤其是多拉纳萨依、托库孜巴依、萨尔布拉克、科克萨依和马热勒铁等金矿床控矿构造的研究,作者提出如下新认识:额尔齐斯韧性剪切带总体上具有向东收敛、向西散开的基本形式,控矿构造具有向东单一(仅为韧性剪切构造)、向西复杂(脆韧性构造叠加于韧性构造和中酸性岩体上)的特点,由此控制的金成矿作用具有“东浅西深、东弱西强”等6条基本规律。在此基础上,结合EH4深部地球物理测量结果,指出额尔齐斯金矿带西部哈巴河地区和中部富蕴地区是形成大型金矿床的有利地区。     

新城－黄陂走滑韧性剪切带的动力分异作用

本文通过对新城－黄陂断裂带中合河－殷店右行走滑韧性剪切带内糜棱岩类岩石化学成分、稀土元素及微量元素随Ｓｓ－Ｓｃ夹角和古差异应力（△δ）的变化梯度的研究，初步探讨了右行走滑韧性剪切带的动力分异作用。     

河南省文峪金矿床构造控矿规律研究

峪金矿床是小秦岭金矿带内一大型金矿床，属韧—脆性叠加剪切带石英脉型金矿，构造是其首要控矿因素。早期韧性剪切带只对矿脉起宏观控制作用。晚期的脆性断裂为含金石英脉的直接控矿构造。成矿期脆性断裂的多次继承性活动分别控制了热液期4个成矿阶段。脆性断裂形成的空间形态对矿体形态产状具控制作用。有利的矿化富集部位为：①显示压扭性质的近东西向断裂沿走向产状变化处，沿倾向由陡变缓处，断裂面的凹凸转变处；②断裂分支复合部位；③成矿期断裂多次脉动的启张部位；④成矿期断裂构造继承性活动强的部位等。在构造控矿研究的基础上，结合前人部分研究成果。构建了该矿床构造控矿模式。     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.