大口径取心工艺在刚果(金)某矿区的应用

为了满足选冶试验矿样质量的需要,刚果（金）Sicomines铜钴矿区选用了大口径取心（≥Φ325 mm）钻探工艺。实际应用表明,针对完整或破碎地层条件选用不同的筒状钻具及取心工艺是大口径取心工程成功的关键。     

钻井液技术展望

介绍了水基钻井液,油基钻井液和合成基钻井液的特点及发展趋势。     

青海省锡铁山Sedex型铅锌矿床成矿流体来源及演化: 流体包裹体及同位素地球化学证据

锡铁山铅锌矿床产于青海省柴达木盆地北缘早古生代裂陷的中基性火山-沉积岩系中,是我国规模最大的铅锌矿床之一.流体包裹体的温度、盐度、气液相成分测试以及同位素组地球化学研究证明锡铁山矿床形成于喷流沉积系统.管道相成矿流体以深源为主,深源流体的CO_2等气相组分溢出及深源流体与海水的混合作用导致了成矿物质沉淀,层状矿体中石英岩是管道相向SE方向位移、喷流的结果,锡铁山铅锌矿床是VMS型与Sedex型系统的复合或过度.     

Repacking practice for G-3 engineering driller power unit with drive shaft of dual channel reverse circulation

In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.     

河南省煤层气钻井技术发展历程及展望

河南省地勘队伍自2003年开展煤层气钻井施工以来,积极开展技术创新研究,先后研发了大直径绳索取心机具、射流式扩孔掏穴器等专用器具,率先开展了煤层气参数井、水平井、采动井、穿采空井等施工技术研究和实践,形成了涵盖各类煤层气井型的钻井施工技术体系,积累了丰富的实战经验,促进了我国煤层气产业的发展。本文在总结了河南地勘单位在煤层气钻井技术方面取得的成果的基础上,结合国内煤层气开发深度逐渐增加、采空区覆盖面积逐渐增大、构造煤煤层气未实现突破等行业发展需求,提出了开展高效煤层气水平井钻井技术、气动定向钻井技术及构造煤开发钻井关键技术等方面研究的建议。     

冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

采卤对接井施工工艺的工程实践

以江西九二盐业403-404采卤对接井组的施工工程为案例,系统介绍了井区地质情况、钻探施工情况;总结了大口径取心工具的优点,螺杆定向钻进施工工艺及攻克技术难点。     

新型复合胶无粘土冲洗液研究及应用

针对松散覆盖层、强风化破碎层取心率低,岩心松散破碎,孔壁稳定性差等问题,进行了以天然植物胶为主原料的处理剂复配改性研究和冲洗液优化配方研究。主要研究方法是通过有机聚合物和无机交联剂的作用,对羟丙基瓜尔胶(GRJ)进行交联改性,以此获得新型复合胶无粘土冲洗液优化配方,并进行了现场应用。应用效果表明,该冲洗液密度低,粘度可调范围大,流变性和润滑性好,成膜护心、护壁作用强,完全满足第四系覆盖层、胶结差的砂卵石层和强风化破碎地层取心钻进要求。     

Experimental Study Optimizing Hole Cleaning-Cuttings Transport in Oil Drilling Engineering

With a clear understanding of the drilling fluid techniques and the cutting-taking mechanism, a new advanced model is set up for analyzing field data and quantitative forecast of cutting-taking mechanism. Therefore, a number of values affecting the drilling rate and the hole cleaning are studied over a wide range of parameters. Drilling data obtained under high-borehole-pressure conditions are analyzed to determine the causes of the reduction in rate of penetration (ROP) as the borehole pressure increases, which in some cases is caused by the buildup of rock debris under the bit. The theoretical achievement and testing conclusions can be very instructional for horizontal well drilling. Much higher annular velocities are required for effective hole cleaning in directional wells than in vertical wells. Highviscosity muds are observed to provide better transport than low-viscosity muds.     

复合动力钻进工艺在干热岩钻井中的应用研究

2011年山东省地矿局在山东省利津县实施了国内第一个干热岩调查评价项目,采用转盘回转钻进,但钻效低、能耗高。为提高在高温硬岩条件下的钻进效率、缩短钻井周期、降低生产成本,2015年在福建省漳州市实施的中国地质调查局东南沿海深部地热HDR-1干热岩科学钻探工程井（井深4000.86 m,孔底温度109 ℃）和2017年在青海省共和县完成的GR1干热岩科学勘探井（井深3705 m,孔底温度236 ℃）,在施工中均探索使用了“转盘+螺杆钻具”复合钻进工艺,并在高温取心段首次测试应用了“转盘+涡轮钻具”复合取心钻进工艺,取得了良好的效果并就下一步研究方向提出了意见和建议,为螺杆钻具和涡轮钻具的深入研究提供了宝贵的高温施工经验,也将为我国干热岩科学钻探与深部地热资源勘探提供新的技术支撑。