人地复合生态系统韧性研究进展及其对海岸带生态系统韧性研究的启示

在全球气候变化与人类高强度开发的双重影响下,人地复合生态系统和受陆海系统交互影响的海岸带地区生态脆弱性更加明显。如何有效把握人地复合生态系统发展动向,合理规划与调控社会经济活动、促进人地关系协调发展一直是可持续发展领域研究的重点课题。韧性作为系统的内在特征,在防范化解灾害风险、维护区域生态安全中发挥着重要作用,是人地复合生态系统可持续发展能力的重要表现。然而,目前关于人地复合生态系统韧性的内涵、评估方法等方面尚未形成统一的范式,韧性的量化评估方法存在较大差异。通过梳理和归纳现有研究成果认为,韧性经历了从工程韧性、生态韧性到演进韧性的转变,其概念及内涵仍在不断拓展与深化;总结对比了基于过程形成性和状态总结性的韧性评估方法发现,将韧性作为过程与结果的综合评估研究仍较为缺乏;在抵抗扰动、维持稳定和协调发展的韧性理念下,生态系统的保护与修复等将是区域可持续发展应用中人地复合生态系统安全的重要保障。根据人地复合生态系统韧性研究进展的分析结果,结合海岸带生态系统韧性研究的现状及不足,认为未来需要在加强海岸带生态系统韧性内涵挖掘、完善海岸带生态系统韧性评价体系、提高海岸带生态系统韧性监测精度、促进学...     

福建行洛坑钨矿床白钨矿Sm-Nd等时线年龄及微量元素地球化学特征

行洛坑超大型钨矿床位于福建省宁化县东部,是武夷山成矿带内最大的钨矿床,具有储量大、品位低、黑钨矿与白钨矿资源量相近的特点。白钨矿作为含钨矿物,其形成年龄可以代表矿床的成矿时代,其地球化学特征反映了成矿作用环境和过程。文章在对行洛坑钨矿床钨矿脉特征、黑钨矿与白钨矿赋存状态开展调查的基础上,挑选白钨矿单矿物进行了Sm-Nd等时线测年和微量元素测试。研究结果显示,白钨矿结晶年龄为（142.6±2.8）Ma,略小于黑钨矿原位U-Pb年龄（150.5±8.1）Ma和石英流体包裹体Rb-Sr等时线年龄（147.5±2.9）Ma,与矿区隐伏岩体成岩年龄143.5~149.5 Ma在误差范围内完全吻合,也与矿物结晶世代关系吻合,都属于晚侏罗世的产物,说明钨成矿与隐伏岩体成岩近于同时或稍晚发生。白钨矿中微量及稀土元素特征显示第一世代成矿流体中Eu³⁺ < < Eu²⁺,指示成矿流体为还原性流体;第二世代成矿流体中Eu³⁺ > > Eu²⁺,指示成矿流体为氧化性流体。行洛坑钨矿成矿与华南中生代大规模成矿作用及其大地构造背景和动力学环境密切相关。     

2008年初地面观测数据资料审核的异常分析及处理

结合2008年1~2月地面气象观测A文件数据的审核情况,针对台站气压突跳的反常记录,通过理论分析,判断是因天气现象变化所致,同时对特殊天气现象如固态降水、积雪的观测记录,提出处理方法。     

浅淡奇石及其文化渊源

介绍了我国奇石观赏的起源和发展进程 ,对我国石文化传统和各发展阶段的石文化特点进行了探讨     

主汛期降水量预测信号及方差权重方法的应用

为了制作四川盆地主汛期降水预报对相似方法作了改进,首先是根据四川盆地主汛期降水的前３个特征向量分别寻找有物理基础的前期信号作为预报因子,然后充分考虑各因子对总降水量贡献大小定义因子场的相似,确定相似年,最后引入“集成”的思想,由５个相似年的降水场得到预测年降水的定量客观预报。１９８１～１９９４共１４年的预报结果准确率高于当前业务预报水平。     

瞬变电磁法在玄武岩下找矿的应用

应用瞬变电磁法,根据不同地层电阻率不同来确定含煤地层,以达到找煤目的。通过工程典型实例证实,瞬变电磁法在玄武岩盖层下探测找煤的方法效果显著。说明瞬变电磁法在玄武岩覆盖区勘探是一种有效方法。     

The effect of Ca-Tschermaks component on trace element partitioning between clinopyroxene and silicate melt

We have studied the influence of Ca-Tschermaks (Calcium Tschermaks or CaTs) content of clinopyroxene on the partitioning of trace elements between this phase and silicate melt at fixed temperature and pressure. Ion probe analyses of experiments carried out in the system Na₂O–CaO–MgO–Al₂O₃–SiO₂, at 0.1 MPa and 1218°C, produced crystal-melt partition coefficients (D) of 36 trace elements (Li, Cl, Sc, Ti, V, Cr, Fe, Co, Ge, Sr, Y, Zr, Nb, Mo, Ru, Rh, In, Sn, Sb, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta and W), for clinopyroxene compositions between 10 and 32 mol% CaTs. Partition coefficients for 2+ to 5+ cations show, for each charge, a near parabolic dependence of log D on ionic radius of the substituting cation, for partitioning into both the M1 and M2 sites of clinopyroxene. Fitting the results to the elastic strain model of Blundy and Wood [Blundy, J.D., Wood, B.J., 1994. Prediction of crystal-melt partition coefficients from elastic moduli. Nature 372, 452–454] we obtain results for the strain-free partition coefficients of theoretical cations (D₀), with site radius r₀, and for the site's Young's Modulus (E).

In agreement with earlier data our results show that increasing ^ivAl concentration in cpx is matched by increasing D, E_M1, E_M2 and D₀ for tri-, tetra- and pentavalent cations. The degree of fractionation between chemically similar elements (i.e. Ta/Nb, Zr/Hf) also increases. In contrast, D values for mono-, di- and hexavalent cations decrease with increasing ^ivAl in the cpx. The large suite of trace elements used has allowed us to study the effects of cation charge on D₀, r₀ and E. We have found that D₀ and r₀ decrease with increasing cation charge, e.g. r₀=0.66 Å for 4+ cations and 0.59 Å for 5+ cations substituting into M1. Values of E_M1 and E_M2 increase with cation charge as well as with increasing ^ivAl content. The increase in E_M2 is linear and close to the trend set by Hazen and Finger [Hazen, R.M., Finger, L.W., 1979. Bulk modulus-volume relationship for cation–anion polyhedra. J. Geophys. Res. 84 (10) 6723–6728] for oxides. E_M1 values are much higher and do not fit the trend predicted by the Hazen and Finger relationship.     

Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.     

基于ANSYS与OpenGL的高速公路结构物仿真建模及三维地层地表修剪方法

现代三维视景建模与仿真技术在高速公路工程选线、施工以及运营管理中具有良好的应用前景。结构物的仿真建模以及能反映施工前后地表形态变化的三维地层模型研究是高速公路信息化中的重要问题。介绍了一种借用ANSYS有限元分析软件提取结构物三维模型表面几何信息的简便方法;结合OpenGL纹理贴图技术,实现了结构物的仿真建模;针对结构物施工后对地表形态改变较大的问题,提出利用结构物表面数据对三维地层模型地表网格进行修剪的方法--地表网格竖直投影修剪法。把上述方法应用到广东省某高速公路高边坡的三维视景仿真建模中,结果表明,边坡的仿真模型较逼真。三维地层模型修剪后的地表形态与真实情况接近,验证了方法的合理性、可靠性。     

Numerical Simulation of 3D Borehole‐to‐Surface Electrical Method

The anomaly response characteristics of the vertical line‐source 3D borehole‐to‐surface model are simulated by an adaptive finite element method. The calculation shows that the anomaly in the radial direction is pressed and the closer to the source, the more pronounced, the anomaly is stretched in the direction perpendicular to the radius. Adding a B pole in the Y direction can offset the effect of stretching to some extent. The anomaly that is closer to the source of the profile is clearer than the anomaly that is far from the source. The research results are of great significance for guiding the practical application of the borehole‐to‐surface electrical method.