油田污水中Fe2+,S2-,DO及pH值对HPAM-酚醛CDG成胶性能影响的研究

在对河南油田双河矿区油田污水进行全分析的基础上，研究了污水中Fe^2 ,S^2-，溶解氧（DO）及污水的pH值对有机交联体系聚丙烯酰胺（HPAM）－酚醛胶态分散凝胶（CDG）成胶性能的影响。研究结果表明，Fe^2 ,S^2－，DO及污水的pH值对HPAM－酚醛体系的成胶性能都有影响当ρ（Fe^2 )=1.6mg/L,ρ（S^2-)=0.1mg/L,ρ（DO）=1.6mg/L，HPAM－酚醛体系就不能成胶；随着污水pH值的增大，CDG强度变弱。     

基于波动方程的广义屏叠前深度偏移

地震波传播算子的计算效率和精度是制约三维叠前深度偏移的关键因素. 广义屏传播算子(GSP, Generalized Screen Propagator)是一种在双域中实现的广角单程波传播算子. 这一方法略去了在非均匀体之间发生的交混回响,但它可以正确处理包括聚焦、衍射、折射和干涉在内的各种多次前向散射现象. 通过背景速度下的相移和扰动速度下的陡倾角校正,广义屏算子能够适应地层速度的强烈横向变化. 这种算子可以直接应用于炮集叠前偏移,通过将广义屏算子作用于双平方根方程,还可以获得一种高效率、高精度的炮检距域叠前深度偏移方法,用于二维共炮检距道集和三维共方位角道集的深度域成像. 本文首先简述了炮检距域广义屏传播算子的理论,进而讨论了共照射角成像(CAI, Common Angle Imaging)条件,由此给出各个不同照射角(炮检距射线参数)下的成像结果,进而得到共照射角像集. 由于照射角和炮检距的对应关系,共照射角像集又为偏移速度分析和AVO(振幅随炮检距变化)分析等提供了有力工具.     

省级空间信息基础设施建设的意义及途径--以西藏自治区为例

省级空间信息基础设施建设是实现信息化资源、经济、环境管理的基础,但省级空间信息基础设施发展是一项具有战略性的巨型系统工程,跨区域、跨部门、跨学科,其建设和部署必须有统一的领导和安排。文章以西藏自治区为例,根据西藏自治区目前信息化发展现状,探讨了西藏自治区省级空间信息基础设施建设的途径及意义,认为西藏省级空间信息基础设施建设的第一步是提出项目建设的框架及规划,其次根据信息化发展现状及投资力度,制订近期、中长期目标及建设内容,然后根据规划分阶段实施。最后文章讨论了西藏实施省级空间信息的重要意义,为实现西藏电子政府、指导区域经济发展提供依据。     

基于OpenGL的多层三维空间实体叠加建模

多层三维空间实体普遍存在于现实生活中。借助于目前国际最广泛应用的三维图形接口OpenGL将其真实地显示出来，具有重要的现实意义。其中多层三维空间实体建模技术是显示过程的关键步鼻。在实现单层空间实体三维建模的基础上，利用OpenGL实现了多层三维空间实体叠加建模，叠加实现的过程及其属性数据的表示方法。     

Scattering of elastic waves by a general anisotropic basin. Part 2: a 3D model

Scattering of plane harmonic waves by a three‐dimensional basin of arbitrary shape embedded within elastic half‐space is investigated by using an indirect boundary integral equation approach. The materials of the basin and the half‐space are assumed to be the most general anisotropic, homogeneous, linearly elastic solids without any material symmetry (i.e. triclinic). The unknown scattered waves are expressed in terms of three‐dimensional triclinic time harmonic full‐space Green's functions. The results have been tested by comparing the surface response of semi spherical isotropic and transversely isotropic basins for which the numerical solutions are available. Surface displacements are presented for a semicircular basin subjected to a vertical incident plane harmonic pseudo‐P‐, SV‐, or SH‐wave. These results are compared with the motion obtained for the corresponding equivalent isotropic models. The results show that presence of the basin may cause significant amplification of ground motion when compared to the free‐field displacements. The peak amplitude of the predominant component of surface motion is smaller for the anisotropic basin than for the corresponding isotropic one. Anisotropic response may be asymmetric even for symmetric geometry and incidence. Anisotropic surface displacement generally includes all three components of motion which may not be the case for the isotropic results. Furthermore, anisotropic response strongly depends upon the nature of the incident wave, degree of material anisotropy and the azimuthal orientation of the observation station. These results clearly demonstrate the importance of anisotropy in amplification of surface ground motion. Copyright © 2003 John Wiley & Sons, Ltd.     

SEDIMENTATION STUDY ON PUMPED-STORAGE POWER STATION OF PUSHI RIVER

I.INTRODUCTIONThePtlmped-storagepoll,erprojectofPushiriverisconsistedofupperreservoir,lobal-erreset'oir.watertransmissionSystemandpotvergeneratingsystem.ThelowerreservoirIviththecatchmentbasinareaof1141kmZisthewatersupplierl-c'hichislocatedonthedownstreamofthePushiriverinthesouthernpactofNortheastChina.Theupperreservoirisabout300-400metershigherthanthelowerresen!oirattheleftsideoftheriverwithcatchmentbasinareaof1.12km2.Thecharacteristicsoftheprojectandreservoirareshottviintablel-l.Ino…     

三维分块倾斜界面的反演及其应用

介绍了利用反射波走时反演介质层速度和包含直立断层的三维界面的计算方法．对各层界面利用多个倾斜或平界面方程来描述．给出了数值计算实例．结果表明，反演解与真模型很接近，说明计算方法是有效的．利用该方法处理了唐山地震区的ＰｍＰ反射波资料，获得了该区域莫霍界面的三维分块形态．唐山附近莫霍界面错断与该区域１９７６年唐山地震及一系列余震的发生有密切的联系．     

三维溶质运移问题的分步广义迎风解法

对对流占优的三维溶质运移问题提出了分步广义迎风解法，首先利用Ｎ．Ｎ．Ｙａ－ｎｅｎｋｏ对水动力弥散方程分步求解的思想，将原来的一个定解问题分解为两个定解问题即对流定解问题和扩散定解问题，对对流定解问题采用广义迎风对偶单元均衡法求解，对扩散定解问题采用一般的Ｇａｌｅｒｋｉｎ有限元法求解，不仅避免了用一般有限元法和有限差分法求解对流占优的地下水水质数学模型时常出现数值弥散和过量问题，而且避免了求节点速度这一步，节省运算步骤，对井点的浓度变化给出了更合适的求解方法。     

Separate Analysis of Remote Sensing Information of Structures of Different Geological Periods and Quantitative Study of Corresponding Tectonic Stress Fields

The structural feature shown on a remote sensing image is a synthetic result ofcombination of the deformations produced during the entire geological history of an area.Therefore, the respective tectonic stress field of each of the different stages in the complexdeformation of an area can be reconstructed in three steps: (1) geological structures formed atdifferent times are distinguished in remote sensing image interpretation; (2) structuraldeformation fields at different stages are determined by analyzing relationships betweenmicrostructures (joints and fractures) and the related structures (folds and faults); and (3)tectonic stress fields at different stages are respectively recovered through a study of the featuresof structural deformation fields in different periods. Circular structures and related circlular and radial joints are correlated in space to con-cealed structural rises. The authors propose a new method for establishing a natural model ofthe concealed structural rises and calculating the tectonic stress field by using quantitative dataof the remote sensing information of circular structures and related linear structures.     

适用于大旋转角的三维基准转换的一种简便模型

基于大角度的空间直角坐标转换，提出了以方向余弦为参数、适用于任何角度旋转的空间直角坐标转换的简明计算方法。