Hornblende Ar/Ar geochronology across terrane boundaries in the Sveconorwegian Province of S. Norway

Hornblende incremental heating ⁴⁰Ar/³⁹Ar data were obtained from augen gneiss and amphibolite of the Sveconorwegian Province of S. Norway. In the Rogaland-Vest Agder and Telemark terranes, four pyroxene-rich samples, located close (≤ 10 km) to the anorthosite-charnockite Rogaland Igneous Complex, define an age group at 916 + 12/ − 14 Ma and six samples distributed in the two terranes yield another group at 871 + 8/ − 10 Ma. The first age group is close to the reported zircon U---Pb intrusion age of the igneous complex (931 ± 2 Ma) and the regional titanite U---Pb age (918 ± 2 Ma), whereas the second group overlaps reported regional mineral Rb---Sr ages (895-853 Ma) as well as biotite K---Ar ages (878-853 Ma). In the first group, the comparatively dry parageneses of low-P thermal metamorphism (M2) associated with the intrusion of the igneous complex are well developed, and hornblende ⁴⁰Ar/³⁹Ar ages probably record a drop in temperature shortly after this phase. In other hornblende + biotite-rich samples, with presumably a higher fluid content, the hornblende ages are probably a response to hornblende-fluid interaction during a late Sveconorwegian metamorphic or hydrothermal event. A ca 220 m.y. diachronism in hornblende ⁴⁰Ar/³⁹Ar ages is documented between S. Telemark (ca 870 Ma) and Bamble (ca 1090 Ma). Differential uplift between these terranes was mostly accommodated by shearing along the Kristiansand-Porsgrunn shear zone. The final stage of extension along this zone occurred after intrusion of the Herefoss post-kinematic granite at 926 ± 8 Ma. On the contrary, the southern part of the Rogaland-Vest Agder and Telemark terranes share a common cooling evolution as mineral ages are similar on both sides of the Mandal-Ustaoset Line the tectonic zone between them. The succession within 20 m.y. of a voluminous pulse of post-tectonic magmatism at 0.93 Ga, a phase of high-T-low-P metamorphism at 0.93-0.92 Ga, and fast cooling at a regional scale ca 0.92 Ga, suggests that the southern parts of Rogaland-Vest Agder and Telemark were affected by an event of post-thickening extension collapse at that time. This event is not recorded in Bamble.     

层间剪切带粒度分形几何特征及工程地质意义

本文对分形几何方法表征土的粒度组成加以了补充, 并用它来描述和表征层间剪切带的粒度组成, 据此将其划分为五个类型。在此基础上较为深入地阐述了其工程地质意义, 并着重讨论了用它来识别层间剪切带所遭受的构造变形破坏程度、演化阶段问题等。     

Analytical expressions for Fresnel volumes and interface fresnel zones of seismic body waves. Part 2: Transmitted and converted waves. Head waves

Summary Fresnel volumes and interface Fresnel zones of transmitted and head waves are studied. The relation derived for transmitted waves may also be used for converted reflected waves. Considerable attention is devoted to the penetration of Fresnel volumes across structural interfaces, particularly for head waves.     

Analysis of microtremors within the Provadia region near a salt leaching mine

By analysis of microtremors recorded with digital seismological monitoring equipment near the Provadia salt diapir (Bulgaria), two groups of events showing different characteristics have been detected in the vicinity of the salt production area. The first group of events has low magnitudes and is located at a distance of about 1 km from the top of the salt diapir. These events show low stress drops. The second group of tremors is located outside the salt diapir. The corresponding magnitudes and stress drops are larger. The first class of events seems to be related to processes at the contour of the salt leaching caverns, whereas the origin of the second group seems to be connected with stress redistribution processes around the salt body. Based on this analysis, the tectonic model of the Provadia salt diapir has been modified.     

SEISMIC ANISOTROPY IN THE LOWER CRUST INDUCED BY THE LATTICE PREFERRED ORIENTATIONS OF MINERALS

To identify the physical properties responsible for the seismic reflections from the deep ductile shear zones, we have undertaken a study on the effect of lattice preferred orientation (LPO) on the seismic velocity anisotropy. LPO has been quantitatively determined by U-stage measurement for plagioclase (An 49), diopside and hornblende from an extensively deformed basic mylonite from Jotun Nappe, Norway. The typical plagioclase fabrics are produced by plastic flow on (010) [001], and     

Fabric development in brittle-to-ductile shear zones

Brittle-to-ductile shear zones from two separate geological settings are shown to have nucleated on zones of predominantly brittle deformation. The shear zones are not simply foliated cataclasites, since they contain abundant evidence of dynamic recrystallization of constituent minerals. A small quartz diorite lens in the Borrego Springs shear zone, southern California, contains centimeter-scale cataclasite zones that exhibit a gradual transition into foliated rock. Alteration of magnesiohornblende to actinolite, feldspar to white mica plus quartz, and biotite to chlorite, produced elongate minerals that define the foliation. During the later stages of deformation, intracrystalline slip and dynamic recrystallization of quartz and feldspar were important deformation mechanisms.The widespread occurrence of mineralized dilatant cracks predated the development of meter-to-decimeter-scale ductile shear zones in the Striped Rock granite, southern Virginia. Again, important deformation mechanisms in the final stages of deformation were intracrystalline slip and dynamic recrystallization of quartz.In both field areas the role of fluids has been important from the onset of brittle deformation. Fluids may have enhanced early fracturing in addition to causing the alteration and hydrolytic weakening of host rock minerals and the introduction of new mineral species. Each of these processes is thought to have contributed to the later localization of crystal plastic deformation in the rocks.     

Seismic hazard assessment in Jordan and its vicinity

The earthquake hazard in Jordan and its vicinity is assessed on the basis of probabilistic methods. For this purpose, an updated earthquake catalog is compiled which covers the period between AD 1–1989. The earthquakes lie between latitudes 27.0°-35.5° N and longitudes 32.0°-39.0° E. Thirteen seismic zones are defined on a regional seismic and tectonic map presented for the area. Point-source and line-source models are used. The seismic hazard parameters, namely, theb-parameter (of the Gutenberg-Richter relation),m ₁ (the upper bound magnitude), and ₄ (the annual rate of occurrence of earthquakes with local magnitudeM _L 4.0) are calculated for each zone. The results of the seismic hazard assessment are displayed as iso-acceleration contours expected to be exceeded during typical economic life times of structures, i.e. 50 and 100 years. For each model, two seismic hazard maps are derived. In order to determine the importance of the South-eastern Mediterranean zone and the north part of the Red Sea zone from a seismic hazard point of view for Jordan, one seismic hazard map which corresponds to 50 years' economic life for every model, excluding the seismicity of these zones, is derived.     

Partial Crystallization of Mid-Ocean Ridge Basalts in the Crust and Mantle

Pressures at which partial crystallization occurs for mid-oceanridge basalts (MORB) have been examined by a new petrologicalmethod that is based on a parameterization of experimental datain the form of projections. Application to a global MORB glassdatabase shows that partial crystallization of olivine + plagioclase+ augite ranges from 1 atm to 1·0 GPa, in good agreementwith previous determinations, and that there are regional variationsthat generally correlate with spreading rate. MORB from fast-spreadingcenters display partial crystallization in the crust at ridgesegment centers and in both mantle and crust at ridge terminations.Fracture zones are likely to be regions where magma chambersare absent and where there is enhanced conductive cooling ofthe lithosphere at depth. MORB from slow-spreading centers displayprominent partial crystallization in the mantle, consistentwith models of enhanced conductive cooling of the lithosphereand the greater abundance of fracture zones through which theypass. In general, magmas that move through cold mantle experiencesome partial crystallization, whereas magmas that pass throughhot mantle may be comparatively unaffected. Estimated pressuresof partial crystallization indicate that the top of the partialmelting region is deeper than about 20–35 km below slow-spreadingcenters and some ridge segment terminations at fast-spreadingcenters. KEY WORDS: MORB; olivine gabbro; partial crystallization; partial melting; ridge segmentation; fracture zones; crust; mantle; lithosphere     

A Study on Soil Erosion in Pasighat Town (Arunachal Pradesh) India

Pasighat which lies on the foothills of the Himalayas is one of the important townsof Arunachal Pradesh. A very turbulent river named Siang flows through the townand causes frequent flash floods, inundating the low-lying areas. This river and townis also under threat due to continuous soil erosion. This soil erosion affects theneighbouring state of Assam as well. Due to the soil erosion this river known asBrahmaputra in Assam is constantly changing its course making a large numberof water channels with sand bars thus inundating vast cultivable land every year.The study analyses the cause of the problem at Pasighat in the backdrop of theexisting river system, morphology and the geographical evolution of the TransHimalayas.     

Using Active Faults and Seismicity for the Strong Motion Modeling in the Eastern Rif (Northern Morocco)

— The aim of this study is to conduct a probabilistic seismic hazard analysis for the eastern Rif area in northern Morocco. The source zones were established on the basis of the seismicity database, the fracturing analysis deduced from Landsat7 ETM digital enhancement and marine seismic reflection profiles. By the use of this information together with the selected attenuation relationship, the peak ground acceleration contour maps are produced for specific return periods. The map has been divided into intervals of 0.1 degrees in both latitude and longitude to calculate the values at each grid point and draw the seismic hazard curves. The results of seismic hazard assessment are displayed as iso-acceleration contours expected to be exceeded during typical economic life times of structures.