P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

预测有效波高的深度学习模型研究

研究基于RNN、LSTM、GRU深度学习模型,针对NOAA浮标数据集中的44013、44014、44017浮标的数据,通过斯皮尔曼相关性分析提高模型预测效果。实验结果表明,在进行相关性分析后,S-RNN、S-LSTM、 S-GRU的预测效果均比原始RNN、LSTM、GRU模型预测效果好。此外,提出一种基于LSTM的LSTM-Attention 波高预测模型,并进行相关实验,量化LSTM-Attention模型的预测效果,实验结果表明LSTM-Attention模型有更好的预测效果。为评估模型的泛化能力,研究还提出了一种采用邻近浮标数据进行学习,预测浮标缺失数据的方 法。实验结果表明,该方法的预测精度可以达到97.93%。本研究为海浪预测提供了新的方法和思路,也为未来深 度学习模型在海浪预测中的应用提供了参考。     

OC4漂浮式风电平台的水弹性响应及波浪载荷研究

漂浮式风电平台在波浪中的摇晃运动会导致塔架根部产生很大的弯矩,极大地威胁平台结构安全。同时流体的附连水质量效应对平台塔架结构的动响应有着较为显著的影响,因此充分考虑这种流固耦合效应有利于更加准确地评估平台塔架的结构动响应。采用三维频域线性水弹性方法计算塔架在流体作用下的结构共振频率特征以及各阶模态振动的主坐标响应特性,然后通过弹性模态叠加法获得塔架的弯矩载荷。并结合概率学手段,预报了短期极限海况下塔架弯曲载荷响应,为新一代漂浮式风电平台结构安全性评估和方案设计提供了技术支撑。     

频率域全波形反演方法研究进展

全波形反演是一种利用地震波传播的动力学特征来获取地下介质物性参数的反演方法,可为揭示地下精细结构提供重要依据。本文以弹性波方程作为数学模型来模拟地震波传播规律并进行相应的反演方法研究。为提高计算效率与反演结果的准确性,可将近似解析离散化（NAD）算子用于频率域弹性波方程的正演模拟。本文在频率域NAD离散的基础上推导阻抗矩阵的稀疏分块结构与反演目标函数对模型参数的梯度计算公式,由此建立基于NAD算子的频率域弹性波全波形反演方法。为验证该方法的有效性,文中通过数值实验对多种典型介质模型进行反演计算,均得到了理想的反演结果。

     

简单热带海气耦合模型中不同扰动形式的作用

在局地热平衡情况下,将物理量先用韦伯函数展开,然后去掉相应分量的滤波方 法,讨论了简单热带海气耦合模型中不同形式扰动的作用和贡献,结果表明,在热带海气耦合 系统中,大气准定常 Ｒｏｓｓｂｙ波和海洋 Ｒｏｓｓｂｙ波对于耦合系统贡献较大,它们决定着耦合系统 与耦合扰动的性质,而大气准定常Ｋｅｌｖｉｎ波和海洋Ｋｅｌｖｉｎ波对于耦合系统贡献相对较小．     

耗散大气中水平不均匀风场对内重力波传播的影响

采用包括耗散的射线跟踪方法,计算了在水平不均匀风场作用下,不同尺度重力波从对流层直至220km观测高度的传播,结果表明,垂直于重力波传播方向的风以及风剪切能够引起波射线的折射,从而导致重力波明显偏离初始传播方向.在强顺风场作用下,由于风场引起的捕获,大量重力波不能传播到观测高度.由于风场引起的多普勒频移,小周期的重力波在弱顺风条件下能够传播到观测高度.由于反射作用,强逆风场不支持周期低于约18min的较高频重力波的传播.而在弱逆风作用下,大部分中尺度范围重力波都能够传播到观测高度.本文统计了武汉电离层观象台的TID观测数据随热层风场的分布,统计结果与模拟结果符合较好.     

VSP上下行反射波联合成像方法研究

VSP资料上下行波场发育丰富.本文在分析VSP直达波、上行反射波、下行反射波传播路径及其照明范围的基础上,指出了常规VSP波动方程偏移方法缺陷,进而通过修改波场延拓方式,提出了上下行反射波联合成像方法,并在高频近似下分析了该方法的成像原理.该方法不需要进行VSP上下行反射波场分离,能够同时对VSP资料中的一次反射波、自由表面多次波、层间多次波进行成像,比常规成像剖面具有更宽的成像范围和更好的成像效果.该方法能够对下行一次反射波进行成像,从而可以实现常规偏移方法难以处理的高陡倾角构造成像.模拟资料和实际资料处理证明了本文方法的正确性.