Velocity structure of uppermost mantle beneath North China from Pn tomography and its implications

20301 Pn arrival time data are collected from the seismological bulletins of both national and regional seismic networks. Pn travel time residuals are tomographically inverted for the Pn velocity structure of uppermost mantle beneath North China. The result indicates that the average Pn velocity in North China is 7.92 km/s, and the velocity varies laterally from ?0.21 to +0.29 km/s around the average. The approximately NNE trending high and low velocity regions arrange alternatively west-eastward. From west to east we can see high velocity in the middle Ordos region, the Shanxi graben low, the Jizhong depression high, the west Shandong uplift and Bohai Sea low, and the high velocity region to the east of the Tanlu fault. In the southern boundary zone of the North China block, except for the high velocity in the Qingling Mountains region, the velocity is generally lower than the average. Obvious velocity anisotropy is seen in the Datong Cenozoic volcanic region, with the fast velocity direction in NNE-SSW. Notable velocity anisotropy is also seen around the Bay of Bohai Sea, and the fast velocity directions seem to show a rotation pattern, possibly indicating a flow-like deformation in the uppermost mantle there. The Pn velocity variations show a reversed correlation with the Earth's heat flow. The low Pn velocity regions generally show high heat flow, e.g., the Shanxi graben and Bohai Sea region. While the high Pn velocity regions usually manifest low heat flow, e.g., the region of Jizhong depression. This indicates that the Pn velocity variation in the study region is mainly aroused by the regional temperature difference in the uppermost mantle. Strong earthquakes in the crust tend to occur in the region with the abnormal low Pn velocity, or in the transition zone between high and low Pn velocity regions. The earthquakes in the low velocity region are shallower, while that in the transition zone are deeper.     

对测绘个别名词术语英文对应词的商讨

提出了对测绘辞书中个别汉语名词术语所附英文词的修改意见或建议，与测绘界同行商讨。     

机载激光测深中的波浪改正技术

基于我国新研制的机载激光测深系统基本配置，提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案)，具体分析了3种方案的适用条件和应用范围，并从理论上对3种改正模型的计算精度进行了估算。     

2-D deformation analysis of a half-space due to a long dip-slip fault at finite depth

Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and depth of the upper edge of the fault. The effect of dip angle and depth of the upper edge of the fault on stresses and displacements is studied numerically and the results obtained are presented graphically. Contour maps for stresses and displacements are also presented. The results of Rani and Singh (1992b) and Freund and Barnett (1976) have been reproduced.     

软土路基沉降与软土层厚度及填土高度的关系分析

本文就路基沉降观测资料进行深入分析,总结出路基沉降与软土层厚度及填土高度的关系和规律,并分析了原因,推导出计算路基沉降的公式,提出了判断填土速率快慢和填土高度变化大小的新方法。     

1906年玛纳斯7.7级地震孕震过程的数值模拟研究

根据玛纳斯 7 7级强震区的构造格架 ,利用三维有限元方法对 190 6年玛纳斯 7 7级地震的强震区进行了应力模拟研究。结果表明 ,玛纳斯地震的震源区不仅位于应力集中的部位 ,而且该部位集中的应力还会随着时间的增长而增大。数值模拟较好地再现了 190 6年玛纳斯 7 7级地震震源区的应力积累过程     

螺旋坐标下的因子分解合成炮叠前深度偏移

在合成炮叠前深度偏移的基础上，提出了一种高效的合成炮叠前深度偏移方法，即在螺旋坐标下用因子分解进行波场外推的混合法. 用因子分解进行波场外推分为因果过程和反因果过程两个显式求解过程. 这种螺旋坐标下的显式求解过程,提高了波场外推的效率. 根据相位编码原理,对多个射线参数的合成波场进行了编码叠加,基于射线参数实现了MPI并行计算,进一步提高了计算效率. 在推导了有关公式并进行定量分析之后,对Marmousi复杂模型进行了计算,并作了比较,结果表明本文方法具有精度高和速度快的特点,可用于实际资料的计算.     

地震勘探中的炸药震源药量理论与实验分析

炸药由于具有良好的脉冲特性及高能量的特点而作为地震勘探中的主要震源，就炸药本身来说，在地震勘探中药量、井深等参数的选取对激发能量和激发频率有很大的影响。为此，本文运用炸药爆炸理论，从炸药作功角度来加以论述，并通过理论和实验分析得出选取一个最佳的药量和井深激发，既能提高炸药作功能力，又能增强激发能量，从而激发强能量的高频震源子波，达到指导野外地震采集和节约经济成本的目的。     

一种符合视觉规律的,基于地图数据的虚拟地景仿真

本文分析和解决了两个关键性问题，使计算机所生成的虚拟地景符合人的“越近看得越清”视觉规律，并通过实例对该方法的实现过程给予了详细的描述。     

大气气溶胶光学厚度的宽带消光遥感方法及其应用

该文发展了遥感气溶胶光学厚度的一个宽带消光遥感方法 ,它应用地面上太阳直射表探测的宽波段太阳直射信息反演 0 75 μm大气柱光学厚度。这方法的主要误差因子是气溶胶谱的不确定性。数值试验表明 ,气溶胶谱分布的误差所引起光学厚度解的误差一般小于 5 %。 1995年 1— 10月进行的 12 6 7组对比实验表明 ,由本方法探测的气溶胶光学厚度与光度计探测的气溶胶光学厚度的标准差为 10 5 % ,两者平均结果的偏差只有 0 7%。该文还应用这个方法 ,从气象台站辐射观测资料反演得到北京、沈阳等 10个地方 1980— 1994年间晴天气溶胶光学厚度资料 ,并分析其变化规律