Prediction of diagenetic facies using well logs – A case study from the upper Triassic Yanchang Formation,Ordos Basin,China

Understanding diagenetic heterogeneity in tight sandstone reservoirs is vital for hydrocarbon exploration. As a typical tight sandstone reservoir, the seventh unit of the Upper Triassic Yanchang Formation in the Ordos Basin (Chang 7 unit), central China, is an important oil-producing interval. Results of helium porosity and permeability and petrographic assessment from thin sections, X-ray diffraction, scanning electron microscopy and cathodoluminescence analysis demonstrate that the sandstones have encountered various diagenetic processes encompassing mechanical and chemical compaction, cementation by carbonate, quartz, clay minerals, and dissolution of feldspar and lithic fragments. The sandstones comprise silt-to medium-grained lithic arkoses to feldspathic litharenites and litharenites, which have low porosity (0.5%–13.6%, with an average of 6.8%) and low permeability (0.009 × 10⁻³ μm² to 1.818 × 10⁻³ μm², with an average of 0.106 × 10⁻³ μm²).This study suggests that diagenetic facies identified from petrographic observations can be up-scaled by correlation with wire-line log responses, which can facilitate prediction of reservoir quality at a field-scale. Four diagenetic facies are determined based on petrographic features including intensity of compaction, cement types and amounts, and degree of dissolution. Unstable and labile components of sandstones can be identified by low bulk density and low gamma ray log values, and those sandstones show the highest reservoir quality. Tightly compacted sandstones/siltstones, which tend to have high gamma ray readings and relatively high bulk density values, show the poorest reservoir quality. A model based on principal component analysis (PCA) is built and show better prediction of diagenetic facies than biplots of well logs. The model is validated by blind testing log-predicted diagenetic facies against petrographic features from core samples of the Upper Triassic Yanchang Formation in the Ordos Basin, which indicates it is a helpful predictive model.     

海底管道出露悬空环境风险的定量评价研究

海底管道是海洋油气输送的主要方式,其运行状况直接关系到海上油气田的安全和海洋生态环境的质量。本文先以海底管道出露悬空作为故障树的顶事件,分析出海洋环境中各项基本事件,构建针对海洋环境的海底管道故障树模型;再以灰色模糊识别为理论基础,量化对海底管道安全有影响的海洋环境因素,并以层次分析法对每个风险因素进行分级赋权,确定评价指标范围和权重,进而构建海洋环境条件的海底管道风险评价体系。利用该体系对平湖油气田海底管道4个区段进行环境风险评价,避免了将整段管道一同评价导致的信息均等化,评价结果不能真实反映风险等级高的区段的情况;评价结果与管道2014~2016年现场检测数据对比,两者均显示P2分区中海底管道的风险等级较高,说明了该模型具有一定的合理性和实用性。     

溢油污染的渤海海冰反射光谱特征实测研究

Oil spilled on the sea ice surface in the Bohai Sea of China is studied through the field measurements of the reflectance of a simulated sea ice-oil film mixed pixel. The reflection characteristics of sea ice and oil film are also analyzed. It is found that the mixed pixel of sea ice and oil film is a linear mixed pixel. The means of extracting sea ice pixels containing oil film is presented using a double-band ratio oil-film sea-ice index(DROSI) and a normalized difference oil-film sea-ice index(NDOSI) through the analysis of the reflectance curves of the sea iceoil film pixel for different ratios of oil film. The area proportion of the oil film in the sea ice-oil film pixel can be accurately estimated by the average reflectance of the band of 1 610–1 630 nm, and the volume of the spilled oil can be further estimated. The method of the sea ice-oil film pixel extraction and the models to estimate the proportion of oil film area in the sea ice-oil film pixel can be applied to the oil spill monitoring of the ice-covered area in the Bohai Sea using multispectral or hyperspectral remote sensing images in the shortwave infrared band(1 500–1 780 nm).     

New insights into the carbonate karstic fault system and reservoir formation in the Southern Tahe area of the Tarim Basin

As worldwide hydrocarbon exploration has extended from shallowly to deeply buried strata, reservoir quality has attracted substantial and persistent interest in petroleum geology. In particular, deeply buried strata (>5500 m) in the Tarim Basin have attracted considerable attention because carbonate reservoirs that have experienced fracture or dissolution have also been shown to demonstrate considerable hydrocarbon potential. Therefore, it is necessary to determine how these reservoirs are developed and distributed in detail from both scientific and practical standpoints.In this paper, we address this issue using a case study in the southern Tahe area, which is contained within the largest Palaeozoic marine oilfield in China. In the northern Tahe area, mega-paleokarst systems developed in the Ordovician strata; however, the reservoir quality in the southern part of the Tahe area is relatively poor because it is covered by insoluble formations during karstification. Observations of cores and analyses of images of well logging demonstrate that these reservoirs are dominated by caves, vugs and fractures that have developed near faults. We speculate that the faults penetrating insoluble formations represent the main dissolution passages that originally developed these karstic fault systems. Additionally, we analyse a series of outcrops, seismic data, and structures to characterize the spatial geometry of these major faults and their surrounding fractures in detail. Most of these are strike-slip faults, and their subsequent reservoirs can be divided into three categories based on their development, including dendritic, sandwich and slab reservoirs. Recent studies demonstrate that karstic fault reservoirs are most common traps in the study area. Although various types of carbonate karstic fault reservoirs are represented in this region, the dendritic karstic fault reservoir is the most hydrocarbon-rich.Guided by these initial results, 108 wells were drilled from 2013 to 2014, producing 485 thousand tons of oil and yielding success ratios greater than 89%. The average production of dendritic reservoirs is 37.4 tons per day (t/d), while those of sandwich and slab types are 20.2 t/d and 14.0 t/d, respectively. These results represent significant references for future hydrocarbon exploration and the development of similar deeply buried karstic fault reservoirs in the Tarim Basin and elsewhere.     

Controls of hydrocarbon generation on the development of expulsion fractures in organic-rich shale: Based on the Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin,East China

The development of expulsion fractures in organic-rich shale is closely related to hydrocarbon generation and expulsion from kerogen. Organic-rich shales from the upper part of the fourth member and the lower part of the third member of the Paleogene Shahejie Formation in the Jiyang Depression, Bohai Bay Basin, East China, are used as an example. Based on thin sections, SEM and thermal simulation experiments, the characteristics of hydrocarbon generation and the conditions supporting the development of expulsion fractures were explored. The key factors influencing these fractures include the presence of kerogens, their distribution along laminae and around particle boundaries, their exposure to heat and the build-up in pressure due to confinement by low permeability. The development of excess pore fluid pressures and intrinsic low rock fracture strength are the main influencing factors. Pressurization by rapid generation of hydrocarbon provides impetus for fracture initiation and cause bitumen to migrate quickly. The shale laminae results in distinctly lower fracture strength laminae-parallel than laminae-normal and this directs the formation of new fractures in the direction of weakness. When pore fluid pressure increases, maximum and minimum principal effective stresses decrease by different proportions with a larger reduction in the maximum principal effective stress. This increases the deviatoric stress and reduces the mean stress, thus driving the rock towards failure. Moreover, the tabular shape of the kerogen aids the generation of hydrocarbon and the initiation of expulsion fractures from the tip and edge. The resulting fractures extend along the laminae when the tensile strength is lower in the vertical direction than in the horizontal direction. Particle contact boundaries are weak and allow fractures to expand around particles and to curve as the stress/strength regime changes. When pore fluid pressure fields at different fracture tips overlap, fractures will propagate and interconnect, forming a network. This paper could provide us more detailed understanding of the forming processes of expulsion fractures and better comprehension about hydrocarbon expulsion (primary migration) in source rocks.     

对海洋科学的认识与实践

"热带西太平洋海洋系统物质能量交换及其影响"是中国科学院海洋领域投入最大、参加人员最多的一个海洋科学先导项目,该项目使我们第一次有机会从海洋系统角度研究中国近海到西太平洋的一些海洋前沿问题。来自物理、化学、生物、地质和大气等不同学科的科学家们围绕共同的问题,在同一个区域、从不同方向开展协同研究。目前,海洋先导专项已在深海探索与研究、海洋能力建设、科考平台建设、技术队伍建设、科研与技术有机融合的体系建设和海洋前沿探索方面取得一系列突破,为全面、综合地开展深海资源的探测与近海生态安全研究奠定了重要基础。海洋先导专项更多系统性、有影响力的成果将在未来不断涌现出来。     

Simulation of paleotectonic stress fields and quantitative prediction of multi-period fractures in shale reservoirs: A case study of the Niutitang Formation in the Lower Cambrian in the Cen'gong block,South China

Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures.     

High resolution characterization of a core from the Lower Jurassic Gordondale Member,Western Canada Sedimentary Basin

The Gordondale Member is a hydrocarbon source rock and potential unconventional reservoir that extends across northeastern British Columbia and central-northwestern Alberta. It is an organic-rich, calcareous, fossiliferous mudstone with a median total organic carbon value of 6.0 wt%. A total of 230 samples were collected from approximately 25 m of Gordondale Member core for organic matter analysis using Rock-Eval 6 analysis and organic petrology. Detailed core logging provides sedimentological context for organic matter characterization. The predominant organic material in the samples is solid bitumen and liptinite with lesser zooclast and inertinite. Most kerogen is Type II, autochthonous marine biomass, with minimal dilution by inert organic carbon. Rock-Eval T_max values and random reflectance measurements of solid bitumen indicate the samples are within the oil generation window. Solid bitumen contributes a substantial amount of hydrocarbon potential to the interval. A micro-reservoir structure within the core is produced by thin intervals of impermeable displacive calcite that act as barriers to the upward migration of free hydrocarbons. These free hydrocarbon accumulations could make excellent targets for horizontal wells within the Gordondale Member.     

海洋油气开发工程环境影响评价特点浅析

相比陆上油气开发工程和其他海洋工程而言,海洋油气开发工程有其自身的特点,海洋油气开发工程环境影响评价应关注的内容与其他工程有所不同。文章通过分析海洋油气开发工程的特点以及对环境影响的特点,提出海洋油气开发工程环境影响评价要点,即包括施工期悬浮泥沙及钻井液钻屑排放对海洋生态环境的影响、运营期含油生产水排放对海洋生态环境的影响、工程建设对海洋环境敏感目标的影响、溢油事故环境风险分析、污染防治及生态保护措施,并针对目前海洋油气开发工程环境影响评价存在的问题提出改进建议。     

Effect of Silica Fume on Compressive Strength of Oil-Polluted Concrete in Different Marine Environments

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.