储层建模中几种原型模型的建立

储层地质知识库的建立是储层建模过程中极为重要的一步，它为建模提供基本的条件数据及各种统计参数。本文总结了建立地质知识库的主要步骤及基本内容。在资料较少的情况下，需要借助原型模型来提供一些无法直接获得但对建模十分重要的参数，如砂体宽厚比、水平方向变差函数等。文中用3个实例较详细的介绍了建立原型模型的3种主要方法，分别是利用露头、成熟油田和沉积模拟实验建立原型模型，并比较了各自的优缺点。     

在MAPGIS下快速实现柱状剖面图的绘制

将油气化探数据用FORTRAN短程序生成MAPGIS点、线、面明码文件后，再利用MAPGIS图形编辑软件对图形进行编辑加工，达到快速制作油气化探柱状剖面图的目的。使用该方法能充分利用MAPGIS系统资源，降低编制绘图程序的难度。     

砾岩在不同矿化度下的岩电参数变化规律

为解决地层含油饱和度计算误差的问题,用不同矿化度地层水进行了地层因素和电阻增大率的实验,发现了砾岩储层岩电参数的变化规律。进一步有效地利用这一规律可以对含油饱和度的计算误差进行校正,从而修正开发储量中的计算误差。这一规律的研究对克拉玛依砾岩油藏的开发具有重要的指导意义。     

基于GIS的油气储层综合评价方法研究

通过对现有的商用地理信息系统的分析，剖析了传统的储层综合评价方法及存在的问题。充分利用GIS工具，建立油气储层评价空间数据库，整合各种与储层相关的多学科油田图形信息及其相关属性信息，利用GIS与储层评价模型集成解决油气储层评价问题，扩展了GIS的空间分析功能，实现了油气储层评价的科学性和完备性，并以西部某油田为例进行了实例分析。     

沐川地震成因探讨

通过对沐川沙湾间地质、地貌、水文地质和地震活动特征分析，认为该区3级以上地震活动与铜街子电站水库畜水有关。1993～1995年沐川西部连续发生的3次5．0级以上地震属水库诱发的构造性地震。     

储层岩石电性特征的逾渗网络模型研究(英文)

建立能够反映储层孔隙结构、流体特征的逾 渗网络模型,通过数值模拟研究了储层孔隙尺寸、 孔隙形状、连通性、微孔隙的发育状况等对I-Sw曲 线影响的定性规律,研究了地层水矿化度对岩石电 阻率的影响。分析讨论了不同因素对电阻率影响的 相对强度。最后,通过曲线拟合定量地研究了不同 因素对I-Sw曲线的影响规律。研究表明,在上述影 响因素中连通性和微孔隙对I-Sw曲线的影响很大, 其它因素的影响强度较小。地层水矿化度对岩石电 阻率绝对值的影响很大。“非阿尔奇”现象普遍存在, 在低渗透(低连通性)储层岩石中更为明显。     

Dike intrusion associated with the 2000 eruption of Miyakejima Volcano, Japan

The model for the 2000 dike intrusion event between Kozushima and Miyakejima volcano, Japan, was reinvestigated. After the sudden earthquake swarm in Miyakejima volcano, a dike intrusion of large volume was detected by the nationwide GPS network (Geonet). The displacements detected with GPS stations over an area with a radius of about 200 km shows a distribution that is consistent with the dike source being located near Miyakejima volcano.The dike was intruded northwestwards between Miyakejima and the neighboring Kozushima volcano. We searched for the parameters in the models that reproduce the regional displacements due to dike intrusion between Miyakejima and Kozushiima islands. We tested three models, (1) the model with a single dike, (2) the model with a dike and a point dislocation source which represents a creep dislocation source and (3) the model with a dike and a deflation source which represents a magma reservoir. Though all three models can match the horizontal displacements near the source area, model 1 fails to reproduce the regional displacements in the central part of Japan. Both models 2 and 3 can reproduce the regional displacement for horizontal components. Model 3 produces slightly better results than model 2 for vertical components. The balance in the volume budget for models 2 and 3 is also consistent with the observations. These results show that we cannot distinguish between the two models using only GPS observation. As there is no direct evidence for such a large creep or ductile source (corresponds to M7 or more) as proposed in model 2 and the active seismic region migrated back and forth within the linear swarm region, the model with a dike and a deep magma source is preferable. For the deflation point source, we obtained a deflation volume of 1.5 km³ at the depth of 20 km below the dike. An additional ~0.95 km³ of volume loss through caldera collapse and edifice deflation took place at Miyakejima. We conclude that the magma that intruded the dike came in part from below Miyakejima and in part from below the sea floor between Miyakejima and Kozushima, perhaps from reservoirs at the Moho.Editorial responsibility: S Nakada, T Druitt     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

致密砂岩的形成机制及其地质意义——以塔里木盆地英南2井为例

砂质岩的孔隙和喉道被网格状粘土矿物和次生加大矿物充填成微细孔喉状结构时,形成具有较高毛细管压力的致密砂岩。它与地层水发生水锁效应,可大大降低渗透率,成为致密砂岩盖层。当含水饱和度在50%以下时,束缚水饱和度比较低,致密砂岩储层可以产气;当含水饱和度在50%～90%区间时,具有较高的束缚水饱和度,相对渗透率非常低,它既不能产气也不能产水,反映为渗透率瓶颈区(具有盖层性质);当含水饱和度大于90%以上时,致密砂岩储层仅微量产水。塔里木盆地英南2井侏罗系气藏盖层由致密砂岩构成,不含水时的气体渗透率在(0.027～0.081)×10-3μm2,不能构成封堵;当含水饱和度达到60%以上时,相对渗透率几乎为零,构成有效盖层。     

三峡水库区巫山新县城库岸综合治理设计回顾

三峡水库区巫山新县域库岸综合治理工程范围内涉及到滑坡、泥石流、塌岸等多种地质灾害。治理工程综合运用了多种技术与结构措拖，工程的复杂性和典型性在整个三峡库区具有极强的代表意义。笔者对整个治理方案的布置情况进行了归纳总结，并以翔实的第一手资料对治理工程设计过程中出现的几种典型问题一一进行了分析与论述．提出了相应的解决方案与合理化建议。结论认为，库岸综合治理工作，必须根据不同的地形特征，结合城区总体布局及沿线市政工程建设，综合考虑，有机结合，做到治理和利用相结合，最大限度地改善新城建设用地环境和城市生态环境。设计人员必须依照现场实际条件进行动态设计，确保工程方案合理、可靠、经济。文中讨论的问题和实践经检对同类工程具有一定的借鉴意义。