自聚焦光纤中传导模的场分布

从亥姆霍兹方程出发，导出了自聚焦光纤中传导模在圆柱坐标系中的场分布形式，并给出了几个低阶模的分布图。     

强震下四边钢柱支承单层柱面网壳弹塑性地震响应研究

采用集中塑性铰理论和SAP2000结构分析软件,对某体育练习馆（钢柱周边支承单层柱面网壳）整体结构进行了强震下弹塑性地震响应分析。分析中考虑了几何和材料双重非线性影响,获得了节点位移响应、杆件塑性铰的分布特征和结构的整体变形与失效形态,并评定了整体结构在强震下的极限承载力与失效类型。结果表明：该结构在强震下的失效界限地震加速度峰值为1260gal,最大竖向变形为短向跨度的1/163,满足＂避难与救灾建筑结构＂的抗震性能设防要求;结构的失效类型为动力失稳破坏,临界失效时出现塑性铰的杆件较少,结构塑性发展程度不充分;由整体稳定控制的单层柱面网壳在满足稳定承载力的要求下具有较大的抗震潜能。     

地震动差动作用下大跨度空间网壳结构的反应分析

选取100m跨度的双层柱面网壳结构为研究对象,采用时程分析法,分别进行了结构在单向和三向地震行波输入作用下的反应分析,并针对多种视波速情况进行了研究,考查了地震动不同输入情况下结构杆件内力的分布特点,对其进行了对比分析,为大跨网壳结构的抗震设计提供了理论依据。研究表明,考虑行波效应会使结构部分构件内力有一定程度的提高,多维地震作用比单维地震作用下结构的杆件内力大。由此得出结论：对于大跨度空间网壳结构,应该进行多维非一致输入下的地震反应分析;为保证抗震安全,应对可能出现的地面视波速进行全面分析。     

单层柱面网壳弹塑性地震反应特征

本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。     

Scattering of plane SV waves by cylindrical canyons in saturated porous medium

On the basis of Biot dynamic theory, an analytic solution of two-dimensional scattering and diffraction of plane SV waves by circular cylindrical canyons in a half space of saturated porous media is presented in this paper for the first time. The solution is obtained by employing the Fourier–Bessel series expansion technique. Parametric studies had been carried out, which includes: the angle of incidence, the frequency of the incident SV wave, the porosity of saturated porous medium and the stiffness and Poisson's ratio of the solid-skeleton. All the outcomes are useful for the seismic analysis of the surface topography conditions.     

钢筋混凝土剪力墙非线性单元模型的研究

本文首先对等效框架模型、多竖直杆单元模型作了改进.然后应用改进等效框架模型、改进多竖直杆单元模型及分层壳单元模型,对不同轴压比的三片剪力墙构件模型与一个14层筒中筒结构模型进行了计算分析,并与实验结果作了比较.结果表明:改进多竖直杆单元模型在所有情况下均可取得较好结果,是适用性较强的剪力墙非线性单元模型;多层壳单元模型...     

Comparison of web plate numerical models for self‐centering steel plate shear walls

Previous research has shown that self‐centering steel plate shear walls (SC‐SPSWs) are capable of achieving enhanced seismic performance at multiple hazard levels, including recentering following design‐level earthquakes. When modeling SC‐SPSWs numerically, these studies considered an idealized tension‐only steel plate shear wall (SPSW) web plate behavior. Research has shown that web plate behavior is more complex than predicted by the idealized model, and web plates can provide more strength, stiffness, and energy dissipation than predicted by the idealized model. The idealized model of web plate behavior is used widely in SPSW numerical models where the moment‐resisting boundary frame provides supplemental hysteretic damping and stiffness; however, in SC‐SPSWs, where the post‐tensioned boundary frame is designed to remain elastic during an earthquake, accounting for the more complex web plate behavior can have a significant impact on seismic performance estimates from numerical simulation. This paper presents different methods for modeling SC‐SPSWs. Responses from these models are compared with experimental results. A simple modification of the tension‐only model, referred to as the tension‐compression strip model, is shown to provide a reasonable approximation of SC‐SPSW behavior. Results from nonlinear response history analyses of SC‐SPSWs with the tension‐only and tension‐compression web plate models are compared to assess how the approximation of web plate behavior affects SC‐SPSW seismic performance. Copyright © 2015 John Wiley & Sons, Ltd.     

单层网壳结构振动压电控制分析与试验研究

通过试验,研究自主研发的压电主动杆件在单层网壳结构中的主动智能控制问题.利用集传感器、作动器和承受荷载等功能于一体的压电主动杆件,对网壳结构的地震响应振动实施主动智能控制.结果表明,这种压电主动构件作为网壳结构的内在控制源,可以有效地控制网壳结构的地震响应,起到抑制网壳振动的作用.     

考虑土-结构相互作用双层柱面网壳在多点输入下的地震反应分析

目前对于网壳结构的地震反应研究大部分仍然采用一致输入,特别是没有考虑土-结构相互作用对网壳结构的影响。本文通过对大型有限元分析软件MSC.Nastran的二次开发,用等效线性化方法考虑土体的非线性,对土体采用三维实体单元建模,并对土体在基岩面上采用地震动的多点输入,计算分析了大跨度双层柱面网壳的动力反应,并且与一致地震动输入下网壳结构的地震反应进行了对比,考察了两者之间的差异,深入分析了考虑土-结构相互作用下,双层柱面网壳结构在多点输入和一致输入下的地震反应规律,并得出了一些重要结论。     

立式储液罐地震反应数值分析

本文采用大型有限元程序ANSYS对立式储液罐的地震反应进行了研究,考虑了不同罐体和内部液体的相互作用,采用3个不同容积的储罐,输入不同强度的地震动时程,进行了大量的数值计算,给出了一些结论。