瞬变电磁法在煤矿水害防治中的应用

煤层附近的富水区(带)严重威胁着煤矿的生产安全，探明地下煤层附近富水区的赋存和断层、裂隙的发育情况，可以有效地指导煤矿水害的防治工作。对于含水地层及富水区，瞬变电磁法在多测道剖面上具有典型响应特征，据此可以查明地下水分布情况。在山东某煤田和河南某矿，应用瞬变电磁勘探，准确地查明了煤层顶底板富水区。．     

Taphonomic differentiation of Acropora palmata facies in cores from Campeche Bank Reefs, Gulf of México

A common assumption in the geological analysis of modern reefs is that coral community zonation seen on the surface should also be found in cores from the reef interior. Such assumptions not only underestimate the impact of tropical storms on reef facies development, but have been difficult to test because of restrictions imposed by narrow‐diameter cores and poor recovery. That assumption is tested here using large‐diameter cores recovered from a range of common zones across three Campeche Bank reefs. It is found that cores from the reef‐front, crest, flat and rubble‐cay zones are similar in texture and coral composition, making it impossible to recognize coral assemblages that reflect the surface zonation. Taphonomic signatures imparted by variations in encrustation, bioerosion and cementation, however, produce distinct facies and delineate a clear depth zonation. Cores from the reef‐front zone (2–10 m depth) are characterized by sections of Acropora palmata cobble gravel interspersed with sections of in‐place (but truncated) A. palmata stumps. Upper surfaces of truncated colonies are intensely bioeroded by traces of Entobia isp. and Gastrochaenolites isp. and encrusted by mm‐thick crustose corallines before colony regeneration and, therefore, indicate punctuated growth resulting from a hurricane‐induced cycle of destruction and regeneration. Cores from the reef crest/flat (0–2 m depth) are also characterized by sections of hurricane‐derived A. palmata cobble‐gravels as well as in‐place A. palmata colonies. In contrast to the reef front, however, these cobble gravels are encrusted by cm‐thick crusts of intergrown coralline algae, low‐relief Homotrema and vermetids, bored by traces of Entobia isp. and Trypanites isp. and coated by a dense, peloidal, micrite cement. Cores from the inter‐ to supratidal rubble‐cay zone (+0–5 m) are only composed of A. palmata cobble gravels and, although clasts show evidence of subtidal encrustation and bioerosion, these always represent processes that occurred before deposition on the cay. Instead, these gravels are distinguished on the basis of their limited bioerosion and marine cements, which exhibit fabrics formed in the intertidal zone. These results confirm that hurricanes have a major influence on facies development in Campeche Bank reefs. Instead of reflecting the surface coral zonation, each facies records a distinctive, depth‐related set of taphonomic processes, which reflect colonization, alteration and stabilization following the production of new substrates by hurricanes.     

Centrifuge modelling of the influence of crustal fabrics on the development of transfer zones: insights into the mechanics of continental rifting architecture

Centrifuge analogue experiments are used to model the reactivation of pre-existing crustal fabrics during extension. The models reproduced a weakness zone in the lower crust whose geometry was varied in order to investigate its role in controlling the architecture of rift segments and related transfer zones. The typical rift system geometry was characterised by two offset rift segments connected by a major transfer zone in which boundary faults were oblique to the extension vector and displayed a significant transcurrent component of movement. The transfer zone was also characterised by cross-basin faults with both trend and strike-slip component of movement opposite to that displayed by the master faults. Typically, different structural patterns were obtained by changing the offset angle φ between the rift segments, supporting that the structural pattern at transfer zones is strongly influenced by the orientation of pre-existing discontinuities with respect to the stretching vector. In the models, the aspect ratio (ratio of length vs. width) of the transfer zone shows a positive correlation with the offset angle (i.e., the more the inherited fabric is parallel to the extension direction, the longer and narrower the transfer zones). In case of staircase offset of the rift segments (φ=90°), the structural pattern was characterised by two isolated rift depressions linked by a narrow transfer zone in which border faults with alternating polarity overlapped. Prominent rise of the ductile lower crust was also observed at the transfer zone. Many of these geometrical features display striking similarities with natural rift systems. The results of the current experiments provide useful insights into the mechanics of continental rift architecture, supporting that rift propagation, width and along-axis segmentation may be strongly controlled by the reactivation of pre-existing pervasive crustal fabrics.     

Are isolated stable rigid clasts in shear zones equivalent to voids?

Particles in shear enclose important information about a rock's past and can potentially be used to decipher the kinematic history and mechanical behavior of a certain outcrop or region. Isolated rigid clasts in shear zones often exhibit systematic inclinations with respect to the shear-plane at small angles, tending towards the instantaneous stretching direction of the shear zone. This shape preferred orientation cannot be easily explained by any of the analytical theories used in geology. It was recently recognized that a weak mantle surrounding the clast or a slipping clast–matrix interface might be responsible for the development of the observed inclinations. Physical considerations lead us to conjecture that such mantled, rigid clasts can be effectively treated as voids that are not allowed to change their shape. The resulting equivalent void conjecture agrees well with numerical and field data and has the following important geological implications. (i) Clasts in shear zones can have stable positions in simple shear without the requirement of an additional pure shear component. (ii) The stable orientation can be approached either syn- or antithetically; hence, the clast can rotate against the applied shear sense. (iii) The strain needed to develop a strong shape preferred orientation is small (γ≈1) and therefore evaluations based on other theories may overestimate strain by orders of magnitude. (iv) The reconstruction of far-field shear flow conditions and kinematic vorticity analysis must be modified to incorporate these new findings.     

Structural controls on gold mineralisation and the nature of related fluids of the Paiol gold deposit, Almas Greenstone Belt, Brazil

Chemical analyses suggest that the metavolcanic rocks of the Almas Greenstone Belt (AGB), Tocantins State, Brazil have a continental affinity, possibly related to a continental rift environment. They were metamorphosed to amphibolite facies during a regional tectono-metamorphic event (D_n), retrogressed to greenschist facies assemblages and then hydrothermally altered within dextral strike–slip shear zones (D_n+1). Fracture sets related to D_n+2 intersect S_n+1.The Paiol Gold Mine is one of several mineralised zones within metabasic and meta-intermediate rocks of the AGB. It exploits shoots of sulphide–Au–quartz mineralisation that occupy dilational zones approximately perpendicular to an elongation lineation (L_n+1) within mylonitic foliation S_n+1 (S_n+1=S within the S–C fabric). The dilational zones probably formed due to dextral displacement on sinistrally en echelon C surfaces. Minor amounts of gold may have been introduced or remobilised during D_n+2.Coexisting primary and pseudosecondary fluid inclusions in mineralised quartz veins from ore shoots comprise a high-salinity three-phase type (Type II) and a lower salinity two-phase type (Type I). Homogenisation temperatures for Type II inclusions range from 200 to 410 °C and Type I from 90 to 320 °C. The inclusions and their temperature ranges are believed to reflect heat exchange and some mixing between the two fluid types under relatively constant ambient temperatures, but variable (though broadly declining) fluid temperatures. This took place late in D_n+1 in conjunction with greenschist facies retrogression and localised hydrothermally induced metasomatism.     

Deep seismic reflection profiling in the Archaean northeastern Yilgarn Craton, Western Australia: implications for crustal architecture and mineral potential

Deep seismic reflection data across the Archaean Eastern Goldfields Province, northeastern Yilgarn Craton, Western Australia, have provided information on its crustal architecture and on several of its highly mineralised belts. The seismic reflection data allow interpretation of several prominent crustal scale features, including an eastward thickening of the crust, subdivision of the crust into three broad layers, the presence of a prominent east dip to the majority of the reflections and the interpretation of three east-dipping crustal-penetrating shear zones. These east-dipping shear zones are major structures that subdivide the region into four terranes. Major orogenic gold deposits in the Eastern Goldfields Province are spatially associated with these major structures. The Laverton Tectonic Zone, for example, is a highly mineralised corridor that contains several world-class gold deposits plus many smaller deposits. Other non crustal-penetrating structures within the area do not appear to be as well endowed metallogenically as the Laverton structure. The seismic reflection data have also imaged a series of low-angle shear zones within and beneath the granite–greenstone terranes. Where the low-angle shear zones intersect the major crustal-penetrating structures, a wedge shaped geometry is formed. This geometry forms a suitable fluid focusing wedge in which upward to subhorizontal moving fluids are focused and then distributed into the nearby complexly deformed greenstones.     

Kinematic analysis of sinistral cataclastic shear zones along the northern margin of the Mino Belt, central Japan

In this paper, cataclastic shear zones along the northern margin of the Mino Belt, central Japan are described, and the significance of the shearing in the tectonic evolution of SW Japan is examined. The Mino Belt in SW Japan is composed of accretionary complexes of Jurassic to Early Cretaceous age. Field investigation revealed that remarkable cataclastic shear zones trending east to northeast run along the northern margin of the Mino Belt. Closely spaced cleavage is developed in these shear zones. Lineation on the cleavage plunges at shallow to moderate angles. Deformation structures (e.g. composite planar fabric and asymmetric structure of clasts) in the sheared rocks clearly indicate a sinistral sense of shear. The shearing ceased by latest Cretaceous time, because the sheared rocks are overlain by unsheared Upper Cretaceous volcanic rocks. The sinistral shearing may be closely related to Cretaceous sinistral movement along the eastern margin of Asia. Sinistral shearing along the northern margin of the Mino Belt can be considered as a key for re-examining the tectonic development of SW Japan.     

Significance of shallow core transects for reef models and sea‐level curves,Heron Reef,Great Barrier Reef

A sequence of shallow reef cores from Heron Reef, Great Barrier Reef, provides new insights into Holocene reef growth models. Isochron analysis of a leeward core transect suggests that the north‐western end of Heron Reef reached current sea‐level by ca 6·5 kyr bp and then prograded leeward at a rate of ca 19·6 m/kyr between 5·1 kyr and 4·1 kyr bp (pre‐1950) to the present reef margin. A single short core on the opposing margin of the reef is consistent with greater and more recent progradation there. Further to the east, one windward core reached modern sea‐level by ca 6·3 kyr bp , suggesting near ‘keep‐up’ behaviour at that location, but the opposing leeward margin behind the lagoon reached sea‐level much more recently. Hence, Heron Reef exhibited significantly different reef growth behaviour on different parts of the same margin. Mean reef accretion rates calculated from within 20 m of one another in the leeward core transect varied between ca 2·9 m and 4·7 m/kyr depending on relative position in the prograding wedge. These cores serve as a warning regarding the use of isolated cores to inform reef growth rates because apparent aggradation at any given location on a reef varies depending on its location relative to a prograding margin. Only transects of closely spaced cores can document reef behaviour adequately so as to inform reef growth models and sea‐level curves. The cores also emphasize potential problems in U‐series dates for corals within a shallow (ca 1·5 m) zone beneath the reef flat. Apparent age inversions restricted to that active diagenetic zone may reflect remobilization and concentration of Th in irregularly distributed microbialites or biofilms that were missed during sample vetting. Importantly, the Th‐containing contaminant causes ages to appear too old, rather than too young, as would be expected from younger cement.     

Stromatoporoid growth forms and Devonian reef fabrics in the Upper Devonian Alexandra Reef System,Canada – Insight on the challenges of applying Devonian reef facies models

Existing facies models for Devonian reef systems can be divided into high‐energy and low‐energy types. A number of assumptions have been made in the development of these models and, in some cases, criteria that distinguish important aspects of the models are poorly defined. The Upper Devonian Alexandra Reef System contains a variety of reef fabrics from different depositional environments and is ideal for studying the range of environments in which stromatoporoids thrived and the facies from these different environments. A wide variety of stromatoporoid growth forms including laminar, tabular, anastamosing laminar and tabular, domal, bulbous, dendroid, expanding conical, concave‐up whorled‐laminar, concave‐up massive tabular and platy‐multicolumnar are present in the Alexandra Reef System. The whorled‐laminar and massive tabular concave‐up growth forms are virtually undocumented from other Devonian reefs but were common in the reef front of the Alexandra, where they thrived in a low‐energy environment around and below fair‐weather wave base. In contrast, high‐energy parts of the reef margin were dominated by bioclastic rubble deposits with narrow ribbon‐like discontinuous bodies of laminar stromatoporoid framestone. In the lagoon, laminar stromatoporoids formed steep‐sided sediment‐dominated bioherms in response to sea‐level rise and flooding. Relying mostly on the different reef facies in the Alexandra system, a new classification scheme for Devonian reef fabrics has been developed. Devonian reef fabrics can be classified as being: (i) sediment‐laden metazoan dominated; (ii) metazoan–microbial dominated (boundstone); (iii) metazoan dominated (framestone); or (iv) metazoan–marine cement dominated. Distinction of these fabrics carries important sedimentary and palaeoecological implications for reconstructing the depositional environment. With examples from the Alexandra Formation, it is demonstrated that reef facies accumulated in a range of depositional environments and that the simple observation of massive stromatoporoids with or without microbial deposits does not automatically imply a high‐energy reef margin, as otherwise portrayed in a number of the existing facies models for these systems.