环胶州湾公路海上段汽车尾气的环境影响

对类比路段进行连续模拟试验,进行现场调查,给出汽车尾气主要污染物的排污强度,预测了汽车尾气中CO、C_nH_m和NO_x的扩散范围。     

黄河三角洲河道沉积规律研究Ⅱ. 建林边滩沉积作用机理

通过对建林边滩沉积物粒度分布、粒度参数及水体流变性质的分析，阐述了黄河三角洲上河道水流属于牵引流范畴，与低含沙水流无本质上的差别，并探讨沉积物搬运和沉积的基本特征。     

离子色谱分析在黄土和粉尘研究中的应用

黄土中存在着大量的碱金属及碱土金属，以往的测试方法多为原子吸收和ICP—MS，离子色谱法在测试黄土样品的碱金属和碱土金属元素含量中应用不多。将黄土地质标准样品进行消解后用离子色谱进行测试，测试效果良好，重复测试的相对标准偏差小于5％，与推荐值的相对误差小于5％，准确度和精密度符舍相关的质量控制要求。本实验方法测试的离子含量都在仪器响应呈线性的最佳测试范围之内，标准曲线经回归后相关系数均达到0．9999。黄土样品的分析结果与粉尘气溶胶样品的离子分析结果对比表明，此方法对于探讨粉尘起源以及沙尘暴天气的研究具有重要意义。     

高效液相色谱法测量海洋浮游植物色素浓度

JGOFS计算和SeaWiFS计划推荐高效液相色谱（HPLC）作为海洋浮游植物色色浓度的测量方法。文章参考SeaWiFS计划制定的HPLC分析规范，叙述采用反相C18ODS色谱柱、996PDA、自动进样器（未配柱温箱）和三元梯度的色谱法测量海洋浮游植物色素浓度的具体实践。     

Distribution of dissolved species and suspended particulate copper in an intertidal ecosystem affected by copper mine tailings in Northern Chile

The coastline near Chañaral in Northern Chile is one of the most highly Cu-contaminated zones in the world due to discharges from mining activities for more than 60 years. The speciation of Cu has been studied to determine the importance of organic complexation in highly contaminated areas, and to assess the likely physiological impacts of Cu on marine organisms. Dissolved Cu concentrations of up to 500 nM were measured, completely saturating organic ligands and leading to free Cu²⁺ concentrations in excess of 10^− 8 M. These values are higher than those reported in any other marine environment, and because they occur over an extensive area, provide a unique opportunity to study the effects of Cu on marine ecosystems and to see how Cu behaves when its speciation is predominantly inorganic. We found strong gradients in free Cu²⁺ between Chañaral and adjacent areas with lower Cu, where speciation is dominated by organic complexation. There is also a significant increase in the partitioning of Cu onto suspended particles in the contaminated areas, consistent with previous studies that showed that organic ligands stabilize Cu in the dissolved phase, whilst “excess” Cu is rapidly scavenged. Those high dissolved Cu concentrations persist in spite of solid phase partitioning and advective processes along this open-ocean coastline, suggesting that Cu inputs into the system are still very large. Measurements were made using anodic stripping voltammetry with a thin mercury film coated with Nafion, which previous workers have shown can mitigate ambiguity in the data arising from inadvertent reduction of organic complexes. Our findings suggest that this is a useful methodology for contaminated systems.     

Atmospheric Correction of SeaWiFS Data for the Retrieval of Suspended Sediment in East China Coastal Waters

The data of SeaWiFS (Sea-Viewing Wide Field-of-View Sensor), installed on SeaStar, has been used to generate SSC (suspended sediment concentration) of complex and turbid coastal waters in China. In view of the problems of the SeaDAS (SeaWiFS Data Analysis System) algorithm applied to China coastal waters, a new atmospheric correction algorithm is discussed, developed, and used for the SSC of East China coastal waters. The advantages of the new algorithm are described through the comparison of the restdts from different algorithms.     

Investigation on the Deposition in an Excavated Trough at the East Shore of Jiaozhou Bay, China

- Based on field investigations, this paper analyzes three types of harbour basinns and navigation channel excavated on seabed in Jiaozhou Bay, get a general rule of deposition for excavated trough, it found that pollution is one of crucial factors resulting in the deposition of the excavated trough in the east shore of Jiaozhou Bay. With these results, it predicted the annual deposition thickness for the excavated trough and disclosed the fact that it can't be deposited deadly during one storm. At the same time, with two-dimensional numerical model, it studied the effects of the excavated trough and the reclamation near shore on tidal cureent and said that the excavated trough can decrease the current velocity passing through the trough about 10- 15%, but only limited inside and near the trough and there are no effect on other regions; reclamation can cut off the pollution sources and no obvious effect on the currents of the Jiaozhou Bay. Connecting the deep trough and Cangkou tidal channel with a new     

氨基酸在粘土高岭石上吸附等温线的研究

研究了4种氨基酸（甘氨酸，赖氨酸，天冬氨酸，谷氨酸）在粘土高岭石上的吸附等温线以及金属铜离子对其等温线的影响。研究表明，氨基酸在高岭石上的吸附等温线以及金属铜离子存在时的吸附等温线均属Langmuir型等温线；铜离子浓度增加时，其等温线斜率也增加，并认为体系可形成Ⅰ型三元表面络合物，铜离子对氨基酸在高岭石上等温线影响的规律和在相同体系中它对氨基酸在高岭石上交换吸附百分率E（%）-pH曲线的影响规律相一致。     

The Structure of A Turbulent Jet in A Crossflow-Effect of Jet-Crossflow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentr     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.