不等边基四边形的等距曲线设计

根据等距曲线的成形原理和几何特性,讨论了在有条件下的不等边基四边形等距曲线设计以及基四边形边长和形状的变化对等距曲线的影响,阐述了等距曲线的图形设计原则、轮廓曲线作图方法并加以证明,从而确定了不等边基四边形的设计作图范围和应用特性,扩展了机械传动机构型面联接中的等距曲线设计途径和方法。     

基于DTU的加速度强振动记录终端的设计

设计基于DTU的强振记录终端,采用SOC系列C8051F015型单片机对MEMS加速度计的输出信号进行A/D转换,监测待测体所经受的强振加速度值,并通过DTU内嵌的GPRS无线网络通讯方式将数据发送到远程数据中心.该系统具有体积小,安装与操作方便,免维护等特性.     

Seismic self‐centering steel beam‐to‐column moment connections using bolted friction devices

This paper first presents the force–deformation relationship of a post‐tensioned (PT) steel beam‐to‐column connection constructed with bolted web friction devices (FDs). This paper then describes the test program conducted in the National Center for Research on Earthquake Engineering, Taiwan, on four bolted FDs and four full‐scale PT beam‐to‐column moment connection subassemblies using the FDs. Tests confirm that (1) the hysteretic behavior of four bolted FDs is very stable, (2) the friction coefficient between the steel plate and the brass shim is about 0.34, (3) the proposed force–deformation relationships reasonably predict the experimental responses of the PT connections under cyclically increasing deformations up to a beam peak rotation of 0.05 rad, and (4) the decompression moments do not degrade as beam cyclic deformations increase. Copyright © 2007 John Wiley & Sons, Ltd.     

Seismic performance of a 3D full‐scale high‐ductile steel–concrete composite moment‐resisting frame—Part II: Test results and analytical validation

This paper presents the results of a multi‐level pseudo‐dynamic seismic test program that was performed to assess the performance of a full‐scale three‐bay, two‐storey steel–concrete composite moment‐resisting frame built with partially encased composite columns and partial‐strength beam‐to‐column joints. The system was designed to develop a ductile response in the joint components of beam‐to‐column joints including flexural yielding of beam end plates and shear yielding of the column web panel zone. The ground motion producing the damageability limit state interstorey drift caused minor damage while the ultimate limit state ground motion level entailed column web panel yielding, connection yielding and plastic hinging at the column base connections. The earthquake level chosen to approach the collapse limit state induced more damage and was accompanied by further column web panel yielding, connection yielding and inelastic phenomena at column base connections without local buckling. During the final quasi‐static cyclic test with stepwise increasing displacement–amplitudes up to an interstorey drift angle of 4.6%, the behaviour was ductile although cracking of beam‐to‐end‐plate welds was observed. Correlations with numerical simulations taking into account the inelastic cyclic response of beam‐to‐column and column base joints are also presented in the paper together. Inelastic static pushover and time history analysis procedures are used to estimate the structural behaviour and overstrength factors of the structural system under study. Copyright © 2008 John Wiley & Sons, Ltd.     

非对称双塔连体结构柔性连接体系参数研究

基于非对称双塔连体结构柔性连接体系的3自由度（3-DOF）力学模型,利用虚拟激励法分析了连接构件的频率比、阻尼比和质量比等参数对该复杂结构体系地震反应的影响。根据不同的控制目标,得到了非对称双塔连体结构柔性连接体系支座优化设计参数变化规律和连接参数的优化组合,可用来指导此类结构的减震初步设计。最后以某实际工程为算例进行数值分析,验证了优化理论的正确性。     

跑马岗组时代涉及的若干重大问题

湖北当阳新店—跑马岗剖面的跑马岗组跨白垩系与古近系 ,所含轮藻、介形类化石的丰富程度极为罕见。跑马岗组的时代问题与白垩系 -古近系界线及其陆相辅助层型的建立、印度德干玄武岩沉积夹层的时代、印度与亚洲大陆联合的时代和白垩系 -古近系界线事件起因假说等数个重大地学问题 ,以及江汉盆地深层油气资源评价密切相关 ,值得重视 ,尽早搞清     

基于人工神经网络的航磁信息关联方法的研究

应用人工神经网络方法 ,以航磁数据为样本 ,建立了航磁信息关联的BP人工神经网络模型。对山东省 1∶5 0万航磁水平一阶导数轴向图进行计算机自动关联叠置、提取航磁解释构造轴线的研究。经与垂向二阶导数对比分析 ,证实了该方法给出的模型具有较强的非线性、自适应和学习能力。     

浅谈建筑设计与室内设计的联系与协调

针对现今在设计过程中建筑设计和室内设计的不协调，阐述了建筑设计和室内设计的相关概念及内在联系，分析了造成这种不协调的原因，并提出解决两者协调一致的方法。     

半刚性连接钢管混凝土框架剪力墙结构的动力特性分析

将钢管混凝土框架剪力墙结构作为连续弹性无限自由度结构，建立自由振动方程，分析了半刚性连接对结构自振周期和频率的影响，推导出半刚性连接框剪结构自振周期系数的计算公式。使用通用有限元程序ANSYS进行结构的模态分析，有限元分析结果和公式计算结果吻合良好。结果表明，半刚性连接使得结构自振周期增大，半刚性连接对高阶振型自振周期的影响很小。提出了地震区钢管混凝土框剪结构体系的设计建议，可供工程设计人员参考使用。     

地下水与地表水水量交换识别及交换量计算——以新汴河宿州段为例

为提高地下水与地表水交换量计算结果的准确性,本文利用水力联系、水头差、水温、氡-222、氢氧稳定同位素构建综合识别方法(HHTRO),对新汴河宿州段地下水与地表水水量交换进行识别,并计算交换量。计算结果表明：研究河段单位河长地表水补给地下水的水量变化范围为8.69～366.82 m³/(d·m),地下水补给地表水的水量变化范围为0.72～120.90 m³/(d·m);研究河段左岸为地下水补给地表水,单位河长净补给量为45.26 m³/(d·m);河段右岸为地表水补给地下水,单位河长净补给量为214.33 m³/(d·m);研究河段地下水与地表水水量交换以地表水补给地下水为主,地表水补给地下水的比例为55.14%。本研究可推动地下水与地表水交换量计算方法的发展,为流域或区域水资源评价提供必要的理论方法。