柴达木盆地北缘晚海西—印支期古构造应力分析

为了更好认识柴北缘晚海西—印支期古构造应力特征与演化过程,在天峻快日玛乡、城墙沟、石灰沟等地区详细野外观测的基础上,利用地层恢复和古构造应力反演技术对柴北缘及邻区石炭系—新生界构造观测数据进行分析。结果表明晚二叠世—中三叠世,柴北缘在南—北向挤压作用下向北俯冲碰撞,盆地内部上二叠—中三叠统缺失。晚三叠世开始,西秦岭斜向碰撞柴达木盆地,柴北缘进入造山阶段,所受挤压作用方向转变为北西—南东向,盆地内大范围缺失上三叠统。晚海西—印支期柴北缘内部二叠纪—三叠纪地层大面积剥蚀加之该期强烈挤压作用造成尕海南山石炭系与白垩系、旺尕秀煤矿石炭系与侏罗系之间的角度不整合,意味着下伏石炭系可能遭受强烈破坏。     

MICP联合纤维加筋改性钙质砂力学特性研究

钙质砂是中国南海岛礁工程建设的主要建筑材料和地基土成份,其具有高孔隙、易破碎和强度低等不良工程地质特性。为改善钙质砂力学性能,提高其工程可靠性,提出利用微生物诱导碳酸钙沉积（MICP）协同纤维加筋改性钙质砂。文章通过开展无侧限抗压试验以及扫描电镜测试,对比分析不同纤维掺量下MICP固化钙质砂的力学响应特性及微观破坏机理。结果表明：（1）MICP技术能够有效固化钙质砂,并提升其力学强度;（2）纤维能够增加细菌定殖面积,提升碳酸钙沉积量,并由此提升试样延性和韧性,降低刚度;（3）应力应变曲线呈阶梯状多峰特征。在应力上升阶段,砂颗粒和碳酸钙会发生局部破碎;在峰后应力下降阶段,碳酸钙、砂颗粒、纤维的胶结作用增强了纤维的抗拔性能,限制了破坏面的发展;（4）碳酸钙、砂颗粒、纤维的耦合胶结作用是纤维加筋改善试样韧性、延性的根本原因。     

察尔汗盐湖地区盐渍土微观结构及其力学与强度表现

为探明察尔汗盐湖区盐渍土的微观结构特征及其力学与强度表现,从盐湖区采集9组不同含盐量的盐渍土样品,对盐渍土进行电镜扫描、直接剪切试验和抗压强度试验,从微观结构上分析了盐渍土的力学与强度表现,提出了察尔汗盐湖区盐渍土颗粒骨架的连结形式。研究结果表明,不同含盐量的盐渍土微观结构形式不同,盐渍土颗粒骨架之间的连结有3种形式:1)点式接触、2)堆叠接触、3)盐晶体胶结;微观结构越密实,盐晶体胶结作用越强,盐渍土表现出越高力学与强度特性;盐晶体的胶结作用是影响盐溃土力学与强度特性的显著因素;无侧限抗压强度显著变化的含盐量拐点为45.74%。     

内圆外方复合钢管混凝土短柱轴压承载力试验研究

为研究内圆外方复合钢管混凝土柱的轴压承载力,完成了10个试件的轴心受压试验。试验结果表明:达到峰值承载力时,方钢管纵向已屈服、横向尚未屈服;试件的破坏形态为方钢管向外鼓曲、沿纵向局部撕裂,方钢管与圆钢管之间的混凝土已经酥松、局部压碎;大部分试件即使纵向平均压应变达到0.11,尚能承担不小于其峰值承载力70%的轴力;压缩刚度的计算值平均为实测值的83.6%。采用钢管仅提供轴压承载力、不提供横向约束的假定计算得到的试件的轴压承载力,与试验结果符合最好。     

Analytical simulation of the dynamic compressive strength of a granite using the sliding crack model

A sliding crack model is employed to simulate rock strength under dynamic compression. It is assumed that the growth and nucleation of a sliding crack array presented results in the shear fault failure and dominate the mechanical properties of rock material. The pseudo‐tractions method is used to calculate the stress intensity factor of the sliding crack array under compression. With the utilization of a dynamic crack growth criterion, the growth of the sliding crack array is studied and the simulated strengths of a granite under dynamic compression are correspondingly obtained. It is concluded that the simulated rock strengths increase with increasing strain rates at different confining pressures, and the rising rates have a trend to decrease with increasing confining pressures. It is also indicated that the simulated rock strengths increase with increment of confining pressure at different strain rates, and the rising rates are almost identical at different strain rates. The simulation results are validated by the experimental data for the granite. Copyright © 2001 John Wiley & Sons, Ltd.     

抗高温水泥浆体系研究及应用

基于塔河外围区块深井、超深井对水泥浆基本性能要求,考虑高温高压对浆体性能影响,通过分析抗高温材料的作用机理,优选出适合高温水泥浆体系的外加剂,将缓凝剂、降失水剂、液硅等抗高温材料按需求配比,研究不同密度抗高温（≥120 ℃）水泥浆体系,测定其常规性能。该水泥浆体系流动性好、API失水量＜50 mL/30 min、防窜系数SPN值＜1,水泥石高温稳定性好、抗压强度高等,均满足高温高压井下施工要求。该抗高温水泥浆体系在顺北评1H、顺北7、中探1井应用效果良好,优良率高。     

Random field characterization of uniaxial compressive strength and elastic modulus for intact rocks

Rock properties exhibit spatial variabilities due to complex geological processes such as sedimentation,metamorphism, weathering, and tectogenesis. Although recognized as an important factor controlling the safety of geotechnical structures in rock engineering, the spatial variability of rock properties is rarely quantified. Hence, this study characterizes the autocorrelation structures and scales of fluctuation of two important parameters of intact rocks, i.e. uniaxial compressive strength(UCS) and elastic modulus(EM).UCS and EM data for sedimentary and igneous rocks are collected. The autocorrelation structures are selected using a Bayesian model class selection approach and the scales of fluctuation for these two parameters are estimated using a Bayesian updating method. The results show that the autocorrelation structures for UCS and EM could be best described by a single exponential autocorrelation function. The scales of fluctuation for UCS and EM respectively range from 0.3 m to 8.0 m and from 0.3 m to 8.4 m.These results serve as guidelines for selecting proper autocorrelation functions and autocorrelation distances for rock properties in reliability analyses and could also be used as prior information for quantifying the spatial variability of rock properties in a Bayesian framework.     

Strength characteristics of compacted pond ash

Strength properties of compacted ash layers depend to a great extent on the moulding conditions. This paper focuses on the effects of compaction energy and degree of saturation on strength characteristics of compacted pond ash. The pond ash sample, collected from the ash pond of Rourkela Steel Plant (RSP), was subjected to compactive energies varying from 357 kJ/m³ to 3488 kJ/m³. The optimum moisture content and maximum dry densities corresponding to different compactive energies were determined by conventional compaction tests. The shear strength parameters, unconfined compressive strengths (UCS) and California bearing ratio (CBR) values of specimens compacted to different dry densities and moisture content were assessed and reported. The effects of compaction energy and degree of saturation on shear strength parameters i.e. unit cohesion (c_u) and angle of internal friction (Ф) values and also the UCS values are evaluated and presented herein. The results indicate that the dry density and strength of the compacted pond ash can be suitably modified by controlling the compactive energy and moulding moisture content. The strength achieved in the present study is comparable to the good quality, similar graded conventional earth materials. Hence, it may be safely concluded that pond ash can replace the natural earth materials in geotechnical constructions.     

Research on China’s high-grade highway design index of asphalt pavement with granular base

Based on the 2006 Chinese asphalt pavement deflection value design index, we used KENLAYER Pavement Analysis and Design software and 1stOpt statistical analysis software to carry on the nonlinear regression, this paper establish high-grade highway design equations for the compressive strain of soil sub-base top (CSSBT) and the radial compressive stress of semi-rigid base top (RCSRBT). The correlation coefficients inspection standard to get precise proof, which means that our granular base design equations have high credibility and can be used in the Chinese design index of asphalt pavement with granular base (APGB).     

北京地面沉降区土体变形特征

因过量开采地下水而引发的地面沉降问题已成为北京平原区最主要的地质灾害。北京地面沉降监测网络从2002年开始建设,到2008年底已经基本覆盖整个平原区。本文基于地面沉降分层标和地下水位监测资料,从土体变形与水位随时间的变化、土体变形和水位的关系出发,分析了不同岩性、不同深度土体在不同的水位变化模式下的压缩变形特征,最终将土体在水位变化下的变形特征概括为5类。结果表明:现阶段北京地面沉降区浅部土体压缩减缓,中深部土体和深部土体多以较快的速度持续压缩。砂层以弹性变形为主;不同埋深的粘性土体存在弹性变形、塑性变形和蠕变变形,具有显著的粘弹塑性。