Influence of the surface microlayer on the flux of nonconservative trace gases (CO,H2, CH4, N2O) across the ocean-atmosphere interface

Gas exchange experiments were conducted in the tropical Atlantic Ocean during a ship expedition with FS Meteor using a small rubber raft. The temporal change of the mixing ratios of CO, H₂, CH₄ and N₂O in the headspace of a floating glass box and the concentrations of these gases in the water phase were measured to determine their transfer velocities across the ocean-atmosphere interface. The ocean acted as a sink for these gases when the water was undersaturated with respect to the mixing ratio in the headspace. The transfer velocities were different for the individual gases and showed still large differences even when normalized for diffusivity. Applying the laminar film model, film thicknesses of 20 to 70 m were calculated for the observed flux rates of the different gas species. When the water was supersaturated with respect to atmospheric CO, H₂, CH₄ and N₂O, the transfer velocities of the emission process were smaller than those determined for the deposition process. In case of H₂ and CH₄, emission was even not calculable although, based on the observed gradient, the laminar film model predicted significant fluxes at the air-sea interface. The results are interpreted by destruction processes active within the surface microlayer.     

电偶源频率电磁测深中比值视电阻率和阻抗相位的联合反演

本文论述了电偶源频率电磁测深中,利用比值视电阻率和相应阻抗相位进行联合反演的必要性和可能的应用前景及具体实施方法。理论模型和实际观测资料的反演试验表明这一联合反演是可行和有效的,且明显地优于视电阻率和阻抗相位的单参量反演。     

Geological - Geophysical - Geochemical Exploration Models of Copper - Iron Deposits in Southeastern Hubei

This paper discusses geological-geophysical-geochemical models of such typical deposits as the Tieshan-type Fe-Cu deposit, the Tonglushan-type Cu-Fe deposit, the Yehuaxiang-type Cu deposit, the Jiguanzui-type Cu-Au deposit, and the Tongshankou-type Cu (Mo) deposit. The models were established based on practical data of the polymetallic deposits dominated by copper ore in southeastern Hubei. These models, which are graphically illustrated in the paper, systematically summarize the metallogenic geological conditions and the geophysical-geochemical characteristics of copper deposits in this area. The models are of practical significance for studying copper deposits, predicting mineral resources, choosing exploration methods, and searching for ore deposits based on existing ones in the study area.     

宝顶石刻区污染地下水对造像岩体的破坏作用

污染地下水渗入大佛湾摩岩造像群，在石刻表面积聚可溶盐，加剧了石刻的侵蚀破坏，其中尤以泥质细粒长石砂岩风化剥落最为严重。研究渗水病害对石刻保护有重要意义。     

白牛厂银多金属矿床银的赋存形式及银矿物特征

矿床产在燕山期花岗岩外接触带，受北西向层间滑动构造破碎带控制。含矿热液沿构造破碎带充填，形成规模很大的、连续性极好的、银锡铅锌均分别达到大型的复合矿体。成矿具多成因、多期、多阶段的特点。银主要呈银矿物形式存在，银矿物又主要是多阶段的银锑－银铜锑－银铅锑等硫盐矿物。银矿物粒度很细，多呈包嵌形式存在，与方铅矿关系特别密切。经矿相配合能谱系统研究，辅以部分单矿物分析，初步查明其分布、富集、相互关系及矿物物性特征。     

聚四氟乙烯平板型气态膜回收淡盐水中氯气

本文以离子膜电解氯化钾制取碳酸钾工艺产生的淡盐水为原料,系统地研究了聚四氟乙烯平板型气态膜回收氯过程中膜性能和次氯酸钠水溶液的制备。初步研究表明,次氯酸钠含量大于100g/L,氢氧化钠有效利用率为90％;聚四氟乙烯膜有传质快、对离子截留性能好、使用寿命长等优点,在工业上有较好的应用前景。     

利用SPACE LAB彩色红外影像及数据复合技术对藏北牧草资源进行计算机分类的研究

本文就在藏北草资源调查中,应用空间实验室量测摄影机(MC)摄得的彩色红外影像,及根据遥感影像目视判读所利用的信息空间特点和草场分类原理进行计算机自动分类的理论与方法,对利用辅助数据和影像数据复合技术的几种尝试进行了讨论,并依实地调查资料和专家判读结果对各种分类结果进行了评价。说明利用这种航天遥感资料,辅以Landsat影像生物量指标、DTM和坡度、坡向数据以及计算机自动分类技术,进行资源调查是可行的,可以达到最佳效果。     

黑河地区玉米地膜覆盖节水增产灌溉制度的数学模型

通过一年的试验,初步得出参试各变量x_1(灌溉定额)、x_2(灌溉次数)、x_3(头水叶龄)和x_4(保苗株数)对产量y的多元回归模型。利用这一模型分析了各参试因子对产量的作用,并通过频数分析,筛选了地膜覆盖条件下玉米高于某一产量指标,同时限制灌溉定额或灌水次数的节水增产的优化措施组合。本文还分析了参试因子对玉米产量构成因素的影响,评价了地膜的节水效果和增温增产效果,初步探索了地膜玉米的节水增产机理。     

On the enhanced confining pressure aproach to the mechanics of reinforced soil

Summary A review is presented of conceptual approaches that are currently in use for interpreting the operation of reinforced soil. The concepts of enhanced confining pressure and of reduced normal tensile strains are found to be closely related to current experimental and theoretical investigations as well as to the design methodologies available at present for reinforced soil applications. Focusing on the enhanced confining pressure concept, analytical expressions are developed that allow the estimation of the value of equivalent confining stress increase when the properties of soil and reinforcement and the state of stresses acting on a cylindrical reinforced soil element are known. The derived expressions can also be utilized for estimating the soil-reinforcement friction angle from the results of triaxial tests on cylindrical samples reinforced with horizontal layers of reinforcement.