Evolution and inheritance of a rock coast: western Galicia,northwestern Spain

There is increasing evidence that shore platforms and other elements of rock coasts may be inherited, at least in part, from interglacial stages when sea level was similar to today's. Most of this evidence, which includes ancient beaches and datable terrestrial deposits, has been obtained from areas of resistant, slowly eroding rock, where the platforms often appear to be much too wide to have developed since the sea reached its present level. It is much more dif?cult to demonstrate that inheritance has occurred in areas of weaker rock, which generally lack any datable material. The coast of western Galicia in northwestern Spain has shore platforms in igneous and metamorphic rocks that were deeply weathered during the Tertiary. These platforms are closely associated with ancient beaches from the last interglacial stage, and associated periglacial and ?uvio‐nival deposits that covered and fossilized most of the Eemian platforms and cliffs during the late middle and late Weichselian glacial stage. The sedimentary processes and the thickness and facies of the sediments were determined by the height, aspect and gradient of the coastal mountains, and their distance from the coast. Radiocarbon dating, sedimentary analysis and platform morphology indicate that the shore platforms of Galicia have been inherited from at least the last interglacial stage. They were fossilized in places beneath thick Weichselian deposits and then exhumed during the Holocene transgression. The abundant evidence for inheritance in Galicia has important implications for other coasts in fairly weak rocks where such evidence is generally lacking. Copyright © 2003 John Wiley & Sons, Ltd.     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

A millennial-scale record of Holocene tsunamis on the Kronotskiy Bay coast, Kamchatka, Russia

Deposits from as many as 50 large tsunamis during the last 7000 years are preserved on the Pacific coast of the Kamchatka Peninsula near the mouth of the Zhupanova River, southern Kronotskiy Bay. These deposits are dated and correlated using Holocene marker tephra layers. The combined, preserved record of tsunami deposits and of numerous marker tephras on Kamchatka offers an unprecedented opportunity to study tsunami frequency. For example, from the stratigraphy along southern Kronotskiy Bay, we estimate frequency of large tsunamis (>5 m runup). In the last 3000 years, the minimum frequency is about one large tsunami per 100 years, and the maximum about one large tsunami per 30 years; the latter frequency occurred from about 0 to 1000 A.D. This time interval corresponds to a period of increased seismicity and volcanic activity that appears to be recorded in many places on the Kamchatka Peninsula.     

福建沿海农村风能资源的开发利用

在调查基础，论述开发了风能资源的意义，并对福建沿海农村风能量资源进行了评价，提出了开发农村风能的措施。     

The glacilacustrine sedimentary environment of Bowser Lake in the northern Coast Mountains of British Columbia, Canada

Bowser Lake, a fiord lake in the northern Coast Mountains of British Columbia, contains a thick Holocene fill consisting mainly of silt and clay varves. These sediments were carried into the lake by proglacial Bowser River which drains a high-energy, heavily glacierized basin. Sedimentation in the lake is controlled by seasonal snow and ice melt, by autumn rainstorms, and by rare, but very large jökulhlaups from glacier-dammed lakes in the upper Bowser River basin which complicate environmental inferences from the sedimentary record. Sediment is dispersed through the deep western part of the lake by energetic turbidity currents. The turbidity currents apparently do not overtop a sill that separates the western basin from much shallower areas to the east. Large amounts of silt and clay are deposited from suspension in the eastern part of the lake, but sediment accumulation rates there are much lower than to the west. Several strong acoustic reflectors punctuate the varved fill in the western basin; these may be thick or relatively coarse beds deposited during jökulhlaups or exceptionally large storms. The contemporary sediment yield to Bowser Lake, estimated from sediments in the lake, is about 360 t km^-2a^-1. This is a relatively high value, but it is less than yields insome other, similar montane basins with extensive snow and ice cover.The most likely explanation for the difference is that large amounts of sediment have been, and continue to be, stored on the Bowser delta andin small proglacial lakes.     

Inferring the relative measure of principal stress components

The phase velocity and the attenuation coefficient of compressional seismic waves, propagating in poroelastic, fluid-saturated, laminated sediments, are computed analytically from first principles. The wavefield is found to be strongly affected by the medium heterogeneity. Impedance fluctuations lead to poroelastic scattering; variations of the layer compressibilities cause inter-layer flow (a 1-D macroscopic local flow). These effects result in significant attenuation and dispersion of the seismic wavefield, even in the surface seismic frequency range, 10–100 Hz. The various attenuation mechanisms are found to be approximately additive, dominated by inter-layer flow at very low frequencies. Elastic scattering is important over a broad frequency range from seismic to sonic frequencies. Biot's global flow (the relative displacement of solid frame and fluid) contributes mainly in the range of ultrasonic frequencies. From the seismic frequency range up to ultrasonic frequencies, attenuation due to heterogeneity is strongly enhanced compared to homogeneous Biot models. Simple analytical expressions for the P -wave phase velocity and attenuation coefficient are presented as functions of frequency and of statistical medium parameters (correlation lengths, variances). These results automatically include different asymptotic approximations, such as poroelastic Backus averaging in the quasi-static and the no-flow limits, geometrical optics, and intermediate frequency ranges.     

Pore-water response on seasonal environmental changes in intertidal sediments of the Weser Estuary,Germany

In order to determine time-dependent changes in estuarine pore-water chemistry and flux variations across the sediment-water interface, sediment cores of an intertidal mud flat in the Weser Estuary were taken monthly over a one-year period. Sediment temperature, pH, Eh, Cl^–, O₂, NO ₃ ^– , and SO ₄ ^2– pore-water concentrations were measured and showed variations that relate to the changes of surface temperature and estuarine water composition. Fick's first law was applied to quantify diffusive fluxes from concentration gradients in the diffusive boundary layer and in the pore water. Total nitrate fluxes were calculated from flux chamber experiments. Diffusive oxygen fluxes increased from 5 mmol m^–2 d^–1 in winter to 18 mmol m^–2 d^–1 in early summer, while nitrate fluxes into the sediment increased from 3 mmol m^–2 d^–1 in winter to 60 mmol m^–2 d^–1 in early summer. Oxygen and nitrate fluxes into the sediment correlated linearly to sediment temperature. Sulfate fluxes increased from 0.5 mmol m^–2 d^–1 in winter to 10 mmol m^–2 d^–1 in August and September. Converted into carbon fluxes, the sum of these oxidants ranged from 10 mmol m^–2 d^–1 in winter to 80 mmol m^–2 d^–1 in summer. An estimation of the upper limit of the annual nitrate flux into the sediment showed that about 10% of the 250,000 t of nitrate discharged annually by the river may be decomposed within the inner Weser Estuary.     

Self-sedimentation of phytoplankton blooms in the geologic record

Understanding the formation of laminated, organic-rich sediments is an essential topic for researchers interested in fossil fuels, biogeochemical cycles, Earth's environmental history and global change. Biologists have very recently demonstrated that some marine phytoplankton blooms actively govern their own sedimentation by the formation of sticky transparent gels that facilitate rapid aggregation, accelerated sinking and efficient export flux. Here we present fossil evidence of unfragmented, low-diversity phytoplankton assemblages preserved as sedimentary laminae and irregular flocs that are attributable to a similar phytoplankton-driven sedimentary mechanism we term ‘self-sedimentation’. The geological evidence suggests that self-sedimentation precludes significant heterotrophic grazing, propels the formation of some conspicuous hemipelagic sedimentary laminae and results in efficient carbon and opal flux to the sediments. We suggest that the self-sedimentation phenomenon may have broad implications for the geological history of biogeochemical cycling, oceanic ecological dynamics, and abrupt atmospheric/environmental change. Broader recognition of the self-sedimentation phenomenon as explicitly defined here is a prerequisite to testing these unconventional hypotheses.     

The impact of tourism on coastal areas

The manifold influences of tourism on coastal areas are analysed from three different angles: (1) The development of seaside tourism including the changes of socio-economic and settlement patterns; (2) its cultural impact on the local population; (3) its environmental aspects. Point 1 is described with the help of a model showing four peripheries in space and time: (I) the North Sea and Baltic coasts since the 18th century; (II) Southern Europe during the 19th century; (III) the North African shores around 1950; (IV) the tropical oceans after 1965. Within every periphery, several phases (pioneer, domestic, international) can be distinguished according to the origin of tourists, the investment, the know-how etc. While the beginning of every phase is dominated from abroad, later-on national actors play an increasing role. This applies also to point 2, which refers mainly to developing countries. As for point 3, mass tourism may result detrimentally on water supply, sensitive coastal landscapes, socio-cultural identity etc. Among the questions to be raised are: How far are industrial societies responsible for any negative impacts of tourism, and what are the chances for, and a general consciousness on, a sustainable tourism development?     

The 3 June 1994 Java Tsunami: A Post-Event Survey of the Coastal Effects

The paper is a report of the field campaign undertaken by an international team (Italian, French and Indonesian) a few weeks after the occurrence of a tsunami invading the south-eastern coast of Java (Indonesia) and it complements the results of a concurrent field survey by Asian and USA researchers. The tsunamigenic earthquake occurred on 3 of June 1994 in the Indian Ocean about 200 km south of Java. The tsunami caused severe damage and claimed many victims in some coastal villages. The main purpose of the survey was to measure the inundation and the runup values as well as to ascertain the possible morphological changes caused by the wave attacks. Attention was particularly focussed on the most affected districts, that is Lumajang, Jember and Banyuwangi in Java, although also the districts of Negera, Tebanan and Denpasar in Bali were examined. The most severe damage was observed in the Banyuwangi district, where the villages of Rajekwesi, Pancer and Lampon were almost completely levelled by the violent waves. Most places were hit by three significant waves with documented wave height often exceeding 5 m. The maximum runup value (9.50 m) was measured at Rajekwesi, where also the most impressive erosion phenomena could be found. In contrast, only in one place of the neighbouring island of Bali was there a slight tsunami, the rest of the island being practically unaffected.